Mercedes C140 SEC/CL 600 6.0 Suspension arm (408 hp Petrol M 120.980)
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Upper, Rear, both sides, Rear Axle
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Overall Length [mm]: 376
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: 273C0818
- Manufacturer: RIDEX
- EAN number: 4059191709427
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle both sides, Lower, Rear
- Length [mm]: 432
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Inner Diameter [mm]: 12
- Inner Diameter 2 [mm]: 13
- Item number: 273C0743
- Manufacturer: RIDEX
- EAN number: 4059191708857
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Front Axle Right
- Weight [kg]: 2,42
- Item number: 273C0315
- Manufacturer: RIDEX
- EAN number: 4059191493982
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 16
- Fitting Position: Front Axle Left
- Weight [kg]: 2,28
- Item number: 273C0319
- Manufacturer: RIDEX
- EAN number: 4059191493975
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Left, Right, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Rod / Strut: Guide Rod
- Packing Type: Box
- Packaging length [cm]: 34,5
- Packaging width [cm]: 8,5
- Packaging height [cm]: 6,5
- Item number: ME-TC-2746
- Manufacturer: MOOG
- EAN number: 4044197332236
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Front, Centre
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Item number: 58117209
- Manufacturer: METZGER
- EAN number: 4062101069900
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Middle, Front, both sides
- Length [mm]: 290
- Item number: JTC1006
- Manufacturer: TRW
- EAN number: 3322937400140
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Lower, Rear
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51,5
- Packaging width [cm]: 9
- Packaging height [cm]: 7
- Item number: ME-TC-4184
- Manufacturer: MOOG
- EAN number: 4044197378326
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Steel
- Cone Size [mm]: 12,5
- Fitting Position: Rear, Rear Axle Upper
- Rod / Strut: Push Rod
- Observe service information
- Item number: 49422
- Manufacturer: SIDEM
- EAN number: 5413978122998
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Front
- Overall Length [mm]: 485
- Item number: JTC998
- Manufacturer: TRW
- EAN number: 3322937390991
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Steel
- Cone Size [mm]: 12,5
- Fitting Position: Rear, Rear Axle Upper
- Rod / Strut: Push Rod
- Observe service information
- Item number: 45670
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978828586
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 12,2
- Fitting Position: Rear Axle both sides, Upper, Rear
- Length [mm]: 323
- Weight [kg]: 0,584
- Inner Diameter [mm]: 13,2
- Item number: 95-90842
- Manufacturer: RTS
- EAN number: 2243012972551
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- paired article number: V30-7128-1
- Weight [kg]: 0,425
- Rod / Strut: Camber Link
- Packaging width [cm]: 5,65
- Packaging height [cm]: 3,85
- Packaging Depth [cm]: 37,6
- Item number: V30-7127-1
- Manufacturer: VAICO
- EAN number: 4046001284779
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Upper, Rear, both sides
- Overall Length [mm]: 376
- Item number: JTC999
- Manufacturer: TRW
- EAN number: 3322937391004
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, outer, Upper
- Length [mm]: 432
- paired article number: 250234
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 0,591
- Item number: 250234
- Manufacturer: A.B.S.
- EAN number: 8717109340297
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Cast Steel
- Cone Size [mm]: 12,5
- Fitting Position: in front of axle, Rear Axle Left, Rear Axle Right, outer, Upper
- paired article number: 250095
- Weight [kg]: 0,8
- Item number: 250095
- Manufacturer: A.B.S.
- EAN number: 8717109329094
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear, Rear Axle Lower
- Length [mm]: 322
- Rod / Strut: Push Rod
- Observe service information
- Item number: 49579
- Manufacturer: SIDEM
- EAN number: 5413978185498
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, outer, Lower
- Length [mm]: 322
- paired article number: 250236
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 0,45
- Item number: 250236
- Manufacturer: A.B.S.
- EAN number: 8717109340310
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle both sides, Upper, Front
- Length [mm]: 394
- Weight [kg]: 0,676
- Inner Diameter [mm]: 12,2
- Item number: 95-90841
- Manufacturer: RTS
- EAN number: 2243012972550
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- Fitting Position: Upper Front Axle, outer, Upper, Front Axle Right
- paired article number: V30-7113
- Weight [kg]: 2,275
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 27,5
- Packaging height [cm]: 8
- Packaging Depth [cm]: 29
- Item number: V30-7110
- Manufacturer: VAICO
- EAN number: 4046001141942
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- 1
- 2
- 3
- 4
- 5