Vehicle identification number: 0600950
Passat 3a5 2.0 16V Wheel hub (150 hp Petrol ABF)
- Fitting Position: Right, Rear Axle
- Height [mm]: 110
- Weight [g]: 850
- Item number: 653W0166
- Manufacturer: RIDEX
- EAN number: 4059191633012
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle both sides
- Rim Hole Number: 6
- Height [mm]: 109
- Weight [g]: 800
- Item number: 653W0016
- Manufacturer: RIDEX
- EAN number: 4059191161836
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Height [mm]: 75
- Number of Teeth, ABS ring: 48
- Internal Toothing wheel side: 36
- Diameter [mm]: 40, 127
- Item number: 653W0012
- Manufacturer: RIDEX
- EAN number: 4059191164752
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Front Axle
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Diameter [mm]: 39,9
- Inner Diameter 2 [mm]: 17,5, 29,0
- Width 2 [mm]: 14,2
- Width 1 [mm]: 13,9
- Outer Diameter 2 [mm]: 50,3
- Item number: 654W0002
- Manufacturer: RIDEX
- EAN number: 4059191319480
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Required quantity: 2
- Fitting Position: Rear Axle, Front Axle
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Diameter [mm]: 39,9
- Inner Diameter 2 [mm]: 17,5, 29,0
- Width 2 [mm]: 14,2
- Width 1 [mm]: 13,9
- Outer Diameter 2 [mm]: 50,3
- Item number: 654W0002P
- Manufacturer: RIDEX PLUS
- EAN number: 4067448815364
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: Contains two wheel bearing sets
- Diameter [mm]: 39,9
- Inner Diameter 2 [mm]: 17,5, 29
- Width 2 [mm]: 14,7
- Width 1 [mm]: 14,6
- Outer Diameter 2 [mm]: 50,3
- Item number: 654W0650
- Manufacturer: RIDEX
- EAN number: 4059191652297
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 40
- Engine Code: ABF
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Diameter [mm]: 72,1
- Width [mm]: 37
- Item number: 654W0091
- Manufacturer: RIDEX
- EAN number: 4059191321483
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides
- Supplementary Article / Supplementary Info Info 2: with flange
- Braking / Drive Dynamics: for vehicles without ABS
- Brake Type: Drum Brake
- Item number: 654W0881
- Manufacturer: RIDEX
- EAN number: 4059191619313
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Rim Hole Number: 4
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle 脴 [mm]: 100
- Number of Teeth: 22
- Braking / Drive Dynamics: for vehicles without ABS
- Width [mm]: 40
- Diameter [mm]: 120
- Supplementary Article / Supplementary Info: without fastening / mounting material
- Item number: 100 407 0007
- Manufacturer: MEYLE
- EAN number: 4040074226285
- Condition: New
- Fitting Position: Rear Axle, Rear Axle both sides
- Rim Hole Number: 6
- Height [mm]: 109
- Weight [g]: 800
- Item number: SKWB-0180459
- Manufacturer: STARK
- EAN number: 4059191281640
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles without ABS
- Fitting Position: Rear Axle
- Height [mm]: 110
- Diameter [mm]: 81
- Net weight [kg]: 0,78
- Gross Weight [kg]: 0,79
- Item number: 4P010-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083196633
- Condition: New
- Fitting Position: Rear Axle both sides
- Height [mm]: 109,5
- Weight [kg]: 0,816
- Diameter [mm]: 80, 29
- Drum diameter [mm]: 44
- Number of bores: 6
- Item number: 90516
- Manufacturer: Metalcaucho
- EAN number: 224664104754111047541
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Bolt Hole Circle 脴 [mm]: 100
- Number of Holes: 4
- Weight [kg]: 1,613
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 40
- Packaging width [cm]: 16,4
- Packaging height [cm]: 12,1
- Packaging Depth [cm]: 18,5
- Item number: V10-1396
- Manufacturer: VAICO
- EAN number: 4046001261848
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front axle both sides
- Height [mm]: 75
- Inner Diameter [mm]: 40
- Diameter [mm]: 120,5
- Item number: 00371
- Manufacturer: OSSCA
- EAN number: 6943573003716
- Condition: New
- Fitting Position: Rear Axle
- Weight [kg]: 0,81
- Required quantity: 1
- Item number: 55010034001
- Manufacturer: VIKA
- EAN number: 5501003400101+1
- Condition: New
-
- Fitting Position: Front Axle Left, Front Axle Right
- Braking / Drive Dynamics: for vehicles without ABS
- Rim Hole Number: 4
- Bolt Hole Circle 脴 [mm]: 100
- Diameter [mm]: 40
- Item number: N 2572
- Manufacturer: METZGER
- EAN number: 4250032444990
- Condition: New
- Fitting Position: Rear Axle
- Number of Holes: 6
- Weight [kg]: 0,81
- Required quantity: 2
- Item number: 55010033901
- Manufacturer: VIKA
- EAN number: 224346131574081315740
- Condition: New
-
- Fitting Position: Rear Axle Left
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Type: Drum Brake
- Vehicle configuration line / variant: Achszapfen
- Item number: N 2551
- Manufacturer: METZGER
- EAN number: 4250032445799
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right
- Rim Hole Number: 4
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle 脴 [mm]: 100
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 120
- Supplementary Article / Supplementary Info: without fastening / mounting material
- Item number: 33-0537
- Manufacturer: MAXGEAR
- EAN number: 5907558545241
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with ABS sensor ring
- Bolt Hole Circle 脴 [mm]: 100
- Number of Holes: 4
- Weight [kg]: 1,4969
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 40
- Packaging width [cm]: 12
- Packaging height [cm]: 13,2
- Packaging Depth [cm]: 13
- Item number: V10-1399
- Manufacturer: VAICO
- EAN number: 4046001261879
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- 1
- 2
- 3
- 4
- 5