Vehicle identification number: 0035024
Opel Vectra C CC 1.9 CDTI Automatic transmission fluid (120 hp Diesel Z 19 DT)
Recommended part replacement interval for your car for the part category Automatic transmission fluid: every 30.000 km
- Oil Viscosity Classification SAE: ATF III
- Manufacturer recommendations: CAT TO-2, MB 236.5, ZF TE-ML 09, ZF TE-ML 04D, ZF TE-ML 11, GM Dexron III-H, MAN 339 Typ V-1, Volvo 97341, ZF TE-ML 03D, ZF TE-ML 17C, Allison C4, Ford Mercon, MB 236.1, MB 236.6, MB 236.7, ZF TE-ML 14A, MAN 339 Typ Z-1
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Part Synthetic Oil
- Packing Type: Bottle
- Transmission Type: for automatic transmission
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0,93
- Height [mm]: 225
- Width [mm]: 115
- Length [mm]: 60
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0078
- Our price: 19,25 €
- Manufacturer: VAICO
- EAN number: 4046001355493
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
19,25 € for 1 litre
price incl. 19% VAT
excl. delivery costs
- Oil Viscosity Classification SAE: ATF III
- Manufacturer recommendations: Voith H55.6335.3x, ZF TE-ML 09, ZF TE-ML 11, Volvo 97341, ZF TE-ML 14A, MB 236.1, MB 236.7, ZF TE-ML 03D, Allison C4, CAT TO-2, Ford Mercon, MAN 339 Typ V-1, MB 236.5, MB 236.6, ZF TE-ML 04D, ZF TE-ML 17C, GM Dexron III-H, MAN 339 Typ Z-1
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Part Synthetic Oil
- Packing Type: Canister
- Transmission Type: for automatic transmission
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4,492
- Height [mm]: 230
- Width [mm]: 115
- Length [mm]: 300
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0079
- Our price: 46,29 €
- Manufacturer: VAICO
- EAN number: 4046001355462
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Oil manufacturer recommendation: DTFR 13C170, ZF TE-ML 04D, ZF TE-ML 09, ZF TE-ML 02F, MAN 339 Typ Z1 / V1 / L1, ZF TE-ML 14A, CAT TO-2, MB 236.1, Allison TES 389, ZF TE-ML 11B, VOITH H55.6335.xx, DTFR 13C100, VOLVO 97340, Allison C-4, ATF III, Volvo 97341, ZF TE-ML 17C, MB 236.9, GM Dexron III-H, ZF TE-ML 03D, Ford Mercon
- Observe system fill quantity
- Article number of recommended accessories: V99-0009
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Part Synthetic Oil
- Packing Type: Canister
- Colour: red
- Capacity [litre]: 20
- Weight [kg]: 19,4
- Item number: V60-0332
- Our price: 219,28 €
- Manufacturer: VAICO
- EAN number: 4062375062102
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 285
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 7
- Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Machining: High-carbon
- Drilled: no
- Item number: C3X032ABE
- Manufacturer: ABE
- EAN number: 5900427202238
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: for police vehicles
- Vehicle Equipment: for vehicles with sports package
- Diameter [mm]: 302,3
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45,2
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Drilled: no
- Item number: O1002V
- Manufacturer: LPR
- EAN number: 8032532099063
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Quantity Unit: Axle Set
- Height [mm]: 69,3
- Width [mm]: 155,1
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 20,1
- Production Number: 6001720
- Item number: 6001720
- Our price: 29,31 €
- Manufacturer: KRAFT
- EAN number: 5900427191037
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 25
- Drilled: no
- Item number: BDC5421
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114324
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) from: 41096249 / 48091179
- Construction Year to: 10 / 2008
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 34,67 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
-
- Construction Year to: 10 / 2008
- Brake Caliper Type: for brake calipers with steel pistons
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Item number: 13.0460-7212.2
- Our price: 43,61 €
- Manufacturer: ATE
- EAN number: 4006633274289
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2008
- Brake Caliper Type: for brake caliper with plastic piston
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,1
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1242 / 4466
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7172.2
- Our price: 56,62 €
- Manufacturer: ATE
- EAN number: 4006633374835
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 4463
- MAPP code available
- Observe mounting information
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7194.2
- Our price: 42,35 €
- Manufacturer: ATE
- EAN number: 4006633374385
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) from: 41096249 / 48091179
- Construction Year to: 10 / 2008
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 2272
- MAPP code available
- Observe mounting information
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7195.2
- Our price: 48,29 €
- Manufacturer: ATE
- EAN number: 4006633347020
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
- Fitting Position: Front Axle
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 45
- Surface: Coated
- Centering Diameter [mm]: 70
- Number of Holes: 7
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 25
- Inner Diameter [mm]: 139
- Vehicle type: SRi / Sxi
- Machining: High-carbon
- Bore Diameter [mm]: 14
- Drilled: no
- Item number: C3X033ABE
- Manufacturer: ABE
- EAN number: 5900427202245
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65
- Number of Holes: 7
- Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C4X019ABE
- Manufacturer: ABE
- EAN number: 5900427206984
- Condition: New
price incl. 19% VAT
-
- Construction Year to: 10 / 2008
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: O1014P
- Manufacturer: LPR
- EAN number: 8032928001694
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Height [mm]: 51,9
- Width [mm]: 123,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 15,8
- Production Number: 6015105
- Item number: 6015105
- Our price: 23,84 €
- Manufacturer: KRAFT
- EAN number: 5900427194465
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 285
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5412
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840744
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: BDC5413
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840751
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2008
- Brake Caliper Type: for brake caliper with plastic piston
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0460-7172.2
- Our price: 42,93 €
- Manufacturer: ATE
- EAN number: 4006633105095
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7194.2
- Our price: 31,18 €
- Manufacturer: ATE
- EAN number: 4006633127691
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
price incl. 19% VAT
excl. delivery costs