Vehicle identification number: 0603CTH
VW Passat B9 Variant (CJ5) 2.0 TDI Automatic transmission fluid (150 hp Diesel DXPA)
- Oil Viscosity Classification SAE: ATF DSG
- Manufacturer recommendations: 颅Porsche 000.043.207, 颅Renault BOT 450 EDC, 颅Fiat 9.55550-MZ6, 颅PSA 9734.S2, 颅Porsche 000.043.20, Chrysler 68044345EA, 颅Mitsubishi Dia Quee, AUDI-VW G 052 529 A2, 颅MB 236.21, 颅MB 236.25, 颅MB 001 989 85 03, 颅Ford 1490761, 颅Ford 1490763, 颅Ford XT-11-QDC, 颅AUDI-VW TL 521 82, 颅AUDI-VW G 052 182 A, 颅BMW DCTF-1, 颅BMW FFL-4, 颅BMW MTF-5, 颅BMW 83 22 2 148 578, 颅BMW 82 22 2 148 579, 颅Ford WSS-M2C 936-A, 颅Ford WSD-M2C00-D2, 颅Volvo 1161838, 颅Volvo 1161839
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Article number of recommended accessories: V10-3025, V10-3223
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Synthetic
- Packing Type: Bottle
- Transmission Type: Dual-Clutch Transmission, not for CVT automatic transmission (stepless)
- Transmission Code: DSG
- Colour: yellow
- Capacity [litre]: 1
- Weight [kg]: 0,96
- Height [mm]: 225
- Width [mm]: 115
- Length [mm]: 60
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0118
- Our price: 29,67 €
- Manufacturer: VAICO
- EAN number: 4046001448485
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oil Viscosity Classification SAE: ATF DSG
- Manufacturer recommendations: Dia Queen SSTF-I, Fiat 9.55550-MZ6, MB 236.21, Nissan R35 Special, Porsche 000.043.20, PSA 9734.S2, AUDI-VW TL 521 82, BMW FFL-4, BMW 82 22 2 148 579, BMW 83 22 2 148 578, BMW DCTF-1, BMW MTF-5, Ford 1490761, Ford 1490763, Volvo 1161838, Volvo 1161839, AUDI-VW G 052 529 A2, BMW 83 22 0 440 214, Chrysler 68044345EA, Ford WSS-M2C 936-A, Ford XT-11-QDC, MB 236.25, Renault BOT 450 EDC, AUDI-VW G 052 182 A2, BMW 83 22 2 147 477, Ford WSD-M2C00-D2
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Article number of recommended accessories: V10-3025, V10-3223
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Synthetic
- Packing Type: Canister
- Transmission Type: Dual-Clutch Transmission, not for CVT automatic transmission (stepless)
- Colour: yellow
- Capacity [litre]: 5
- Weight [kg]: 4,98
- Height [mm]: 230
- Width [mm]: 115
- Length [mm]: 300
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0224
- Our price: 118,84 €
- Manufacturer: VAICO
- EAN number: 4046001596018
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1665
- Drilled: no
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 6,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3309.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238718208
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 6,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 100.3309.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238749301
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- for PR number: 1KZ
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle 脴 [mm]: 112
- Thickness [mm]: 48,5
- Minimum thickness [mm]: 20
- Weight [kg]: 7,04
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 24386
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243861
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.A200.11
- Manufacturer: BREMBO
- EAN number: 8020584025598
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: internally vented
- for PR number: 1ZI
- Brake Disc Thickness [mm]: 30
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle 脴 [mm]: 112
- Thickness [mm]: 49,7
- Minimum thickness [mm]: 27
- Weight [kg]: 10,6
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 39129
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816391296
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZI
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,7
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 27
- Drilled: no
- Item number: 8120 291061C
- Manufacturer: TRISCAN
- EAN number: 5710476128478
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169,4
- Weight [kg]: 7
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Drilled: no
- Item number: 92140700
- Manufacturer: TEXTAR
- EAN number: 4019722274688
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented
- Product line: PRO
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169,4
- Weight [kg]: 7
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Drilled: no
- Item number: 92140703
- Manufacturer: TEXTAR
- EAN number: 4019722302503
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- Bore Diameter up to [mm]: 15,3
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: 0 986 479 303
- Manufacturer: BOSCH
- EAN number: 4047024233768
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- for PR number: 1KZ
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle 脴 [mm]: 112
- Hub Diameter [mm]: 150
- Replace in pairs only
- Drilled: no
- Item number: 110 418
- Manufacturer: TOPRAN
- EAN number: 6156450000023
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZI
- Diameter [mm]: 340,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30,0
- Height [mm]: 49,6
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112,0
- Minimum thickness [mm]: 27,0
- Inner Diameter [mm]: 145,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0407
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0130-0225.1
- Manufacturer: ATE
- EAN number: 4006633383226
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Supplementary Info: COATED
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Hole Arrangement / Number: 5 / 10
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: 8120 291002C
- Manufacturer: TRISCAN
- EAN number: 5710476125798
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZI
- Diameter [mm]: 340
- Brake Disc Type: internally vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 27
- Weight [kg]: 10,7
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 600.3243.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238758730
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KX
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: COATED
- Brake Disc Thickness [mm]: 12
- Height [mm]: 50
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: 8120 291066C
- Manufacturer: TRISCAN
- EAN number: 5710476221506
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KX
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: PRO
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,3
- Surface: Coated
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 172,7
- Weight [kg]: 5,2
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Drilled: no
- Item number: 92255403
- Manufacturer: TEXTAR
- EAN number: 4019722456206
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Product line: COATED
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Hub Diameter [mm]: 150
- Weight [kg]: 6,8
- Drilled: no
- Item number: 17729
- Manufacturer: A.B.S.
- EAN number: 8717109548280
- Condition: New
price incl. 19% VAT
excl. delivery costs