Passat 3a5 1.8 G60 Syncro Automatic transmission fluid (160 hp Petrol PG)
Recommended part replacement interval for your car for the part category Automatic transmission fluid: every 30.000 km
- Oil Viscosity Classification SAE: ATF III
- Manufacturer recommendations: AUDI-VW G 052 162 A2, ATF G052, AUDI-VW TL 521 62, AUDI-VW W 501 60
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Synthetic
- Packing Type: Bottle
- Transmission Type: 4-Speed Automatic Transmission, for automatic transmission
- Colour: yellow
- Capacity [litre]: 1
- Weight [kg]: 0,93
- Height [mm]: 225
- Width [mm]: 115
- Length [mm]: 60
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0050
- Our price: 16,37 €
- Manufacturer: VAICO
- EAN number: 4046001327711
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Oil Viscosity Classification SAE: ATF G052
- Specification: AUDI-VW G 052 162 A2
- Chemical Properties: Synthetic
- Packing Type: Bottle
- Transmission Type: 4-Speed Automatic Transmission, for automatic transmission
- Colour: yellow
- Capacity [litre]: 1
- Item number: G052162A2
- Our price: 34,06 €
- Manufacturer: VAG
- EAN number: 2506450009214
price incl. 19% VAT
excl. delivery costs
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Oil manufacturer recommendation: W 501 60, TL 521 62
- Observe system fill quantity
- Article number of recommended accessories: V99-0009
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Synthetic
- Packing Type: Canister
- Transmission Type: 4-Speed Automatic Transmission
- Colour: yellow
- Capacity [litre]: 20
- Weight [kg]: 19,4
- Item number: V60-0339
- Our price: 150,22 €
- Manufacturer: VAICO
- EAN number: 4062375063215
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 39,2
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 20
- Weight [kg]: 11,72
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 9,3
- Drilled: no
- Item number: DDF339
- Manufacturer: FERODO
- EAN number: 5016687133998
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 01 / 1989
- Construction Year to: 12 / 1993
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Front Axle
- Height [mm]: 38,6
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C3W010ABE
- Manufacturer: ABE
- EAN number: 5900427201729
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Construction Year from: 10 / 1993
- Construction Year to: 12 / 1996
- Diameter [mm]: 226
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,1
- Height [mm]: 71,1
- Surface: Oiled
- Centering Diameter [mm]: 50,2
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0527 / 1870
- Drilled: no
- Item number: BG2389
- Manufacturer: DELPHI
- EAN number: 5012759423882
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year to: 07 / 1992
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 38,7
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 18
- Test Mark: E1 90R-02C0277 / 1427
- Drilled: no
- Item number: BG2455
- Manufacturer: DELPHI
- EAN number: 5012759424544
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year from: 02 / 1990
- Construction Year to: 07 / 1992
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 39
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1616
- Drilled: no
- Item number: BG2712
- Manufacturer: DELPHI
- EAN number: 5012759426753
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Construction Year from: 02 / 1990
- Construction Year to: 07 / 1992
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 38,6
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0100 / 1552
- Drilled: no
- Item number: BG2117
- Manufacturer: DELPHI
- EAN number: 5012759421161
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) from: 31-P-080001
- Construction Year to: 10 / 1993
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E9 90R-02A0231 / 1056
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2984.2
- Our price: 23,57 €
- Manufacturer: ATE
- EAN number: 4006633141246
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 1989
- Construction Year to: 10 / 1993
- Quantity Unit: Axle Set
- Brake System: LUCAS
- Wear Warning Contact: without integrated wear sensor
- Thickness [mm]: 19,6
- Fitting Position: Front Axle
- Height [mm]: 69,6
- Width [mm]: 119
- WVA Number: 20901, 20168
- Test Mark: ECE-R90
- Weight [kg]: 1,45
- Supplementary Article / Supplementary Info Info 2: without anti-squeak plate
- Item number: 598252
- Our price: 24,32 €
- Manufacturer: VALEO
- EAN number: 3276425982529
- Condition: New
1923-2023: 100 years of braking
-
- Construction Year from: 07 / 1989
- Construction Year to: 06 / 1993
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 39,2
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C3W007ABE
- Manufacturer: ABE
- EAN number: 5900427201705
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Construction Year to: 07 / 1992
- Diameter [mm]: 256
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 13
- Height [mm]: 39,2
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 11
- Test Mark: E1 90R-02C0100 / 1590
- Drilled: no
- Item number: BG2454
- Manufacturer: DELPHI
- EAN number: 5012759424537
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 08 / 1992
- Construction Year to: 10 / 1993
- Vehicle Identification Number (VIN) from: PE080001
- Manufacturer Restriction: LUCAS
- Quantity Unit: Axle Set
- Brake System: Lucas-Girling
- Thickness [mm]: 15
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with spring
- Height [mm]: 52,9
- Width [mm]: 87
- Item number: 0263.15
- Our price: 19,01 €
- Manufacturer: REMSA
- EAN number: 8427975010896
- Condition: New
-
- Construction Year to: 10 / 1993
- Fitting Position: Rear Axle
- for PR number: 1LA
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 38,6
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: A1011P
- Manufacturer: LPR
- EAN number: 8032532068458
- Condition: New
price incl. 19% VAT
-
- Vehicle Identification Number (VIN) to: 31-P-080000
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 15,2
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0220, E9 90R-02A1163 / 1123
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0419.2, 13.0460-0516.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2937.2
- Our price: 21,16 €
- Manufacturer: ATE
- EAN number: 4006633092982
- Condition: New
-
- Construction Year to: 10 / 1993
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 19,3
- Height [mm]: 69,5
- Width [mm]: 119,0
- Test Mark: E9 90R-02A1251 / 4445
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-2958.2
- Our price: 23,35 €
- Manufacturer: ATE
- EAN number: 4006633117029
- Condition: New
-
- Construction Year to: 10 / 1993
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 38,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 124,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1150
- Bore Diameter [mm]: 13,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0151.1
- Manufacturer: ATE
- EAN number: 4006633054911
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 1993
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 39,5
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 137,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0160
- Bore Diameter [mm]: 13,6
- Drilled: no
- Item number: 24.0122-0101.1
- Manufacturer: ATE
- EAN number: 4006633115476
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 1992
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: 31..P..080 001
- Quantity Unit: Axle Set
- Brake System: Lucas-Girling
- Thickness [mm]: 16,3
- Material: Low-Metallic
- Height [mm]: 53,2
- Width [mm]: 87,2
- WVA Number: 20960
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with bolts / screws
- Article number of recommended accessories: 1987473595, 1987474253, 1987474264, 1987474304, 1987474747, 1987474314, 1987474435, 1987474470, 1987474629, 1987474312
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 461 769
- Our price: 16,81 €
- Manufacturer: BOSCH
- EAN number: 3165143660010
- Condition: New