333ÌåÓýÖ±²¥Ãâ·ÑÔÚÏ߯½Ì¨

  • SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #25-0661
0,00 €
Your basket is empty

Mercedes S211 E 270 CDI 2.7 Brake discs (163 hp Diesel OM 647.961)

Brake rotors Mercedes S211 E 270 CDI 2.7 (211.216) 163 Diesel

Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km

Manufacturers
Fitting Position
Filter
291 items
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 68,3
  • Material: Cast Iron
  • Surface: Uncoated
  • Centering Diameter [mm]: 67,1
  • Number of Holes: 5 / 6
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8,3
  • Inner Diameter [mm]: 180
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Vehicle configuration line / variant: + solid disc
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Drilled: no
  • Item number: 82B0228
  • Manufacturer: RIDEX
  • EAN number: 4059191315611
  • Condition: New
Show OEM numbers of the product
Details
In stock
-45%
compared to RRP 58,20 €

31,88 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Front Axle
  • Diameter [mm]: 295,1
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 28
  • Height [mm]: 54,6
  • Material: Cast Iron
  • Surface: Uncoated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5 / 6
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 25,4
  • Inner Diameter [mm]: 154
  • Machining: High-carbon
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Drilled: no
  • Item number: 82B0160
  • Manufacturer: RIDEX
  • EAN number: 4059191315765
  • Condition: New
Show OEM numbers of the product
Details
In stock
-29%
compared to RRP 45,60 €

32,24 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Rear Axle
    • Vehicle configuration line / variant: + solid disc
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 66
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 8,3
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 82B0228P
  • Manufacturer: RIDEX PLUS
  • EAN number: 4067448072088
  • Condition: New
Show OEM numbers of the product
Details
In stock
-60%
compared to RRP 84,50 €

33,38 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 67,2
  • Material: Cast Iron
  • Surface: Uncoated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5 / 6
  • Wheel Bolt Bore Diameter [mm]: 15,4
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 19,4
  • Inner Diameter [mm]: 180
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Drilled: no
  • Item number: 82B0636
  • Manufacturer: RIDEX
  • EAN number: 4059191316564
  • Condition: New
Show OEM numbers of the product
Details
In stock
-52%
compared to RRP 70,30 €

33,42 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
82B0160P Disc brakes Mercedes-Benz E-Class E270T CDI (211.216) 163 hp 120 kW OM 647.961 2007 S211 RIDEX PLUS 82B0160P Brake rotors Mercedes S211 E 270 CDI 2.7 163 hp Diesel 2005 price RIDEX PLUS 82B0160P Brake disc
RIDEX PLUS 82B0160P Brake disc Front Axle, 295,1x28mm, 5, internally vented, Grey Cast Iron
Article number: 82B0160P
Submit a review
  • Fitting Position: Front Axle
  • Diameter [mm]: 295,1
  • Brake Disc Type: internally vented
  • Brake Disc Thickness [mm]: 28
  • Height [mm]: 55
  • Material: Grey Cast Iron
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 25,4
  • Machining: High-carbon
  • Vehicle configuration line / variant: with bolts / screws
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 82B0160P
  • Manufacturer: RIDEX PLUS
  • EAN number: 4066423804867
  • Condition: New
Show OEM numbers of the product
Details
In stock
34,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
82B0636P Brake discs Mercedes-Benz E-Class E270T CDI (211.216) 163 hp 120 kW OM 647.961 2008 S211 RIDEX PLUS 82B0636P Brake disc Mercedes S211 E 270 CDI 2.7 163 hp Diesel 2004 price RIDEX PLUS 82B0636P Brake disc
RIDEX PLUS 82B0636P Brake disc Rear Axle, 300x22mm, 5, internally vented, Grey Cast Iron
Article number: 82B0636P
Submit a review
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: internally vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 68
  • Material: Grey Cast Iron
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 19,4
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Vehicle configuration line / variant: with bolts / screws
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 82B0636P
  • Manufacturer: RIDEX PLUS
  • EAN number: 4059191997473
  • Condition: New
Show OEM numbers of the product
Details
In stock
-60%
compared to RRP 88,64 €

35,00 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Front Axle
  • Diameter [mm]: 330
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 32
  • Height [mm]: 64,4
  • Material: Cast Iron
  • Surface: Uncoated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5 / 6
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 29,4
  • Inner Diameter [mm]: 154,2
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Payload: for increased payload
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Drilled: no
  • Item number: 82B0720
  • Manufacturer: RIDEX
  • EAN number: 4059191126569
  • Condition: New
Show OEM numbers of the product
Details
In stock
-54%
compared to RRP 111,80 €

50,95 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
82B0720P Brake discs Mercedes-Benz E-Class E270T CDI (211.216) 163 hp 120 kW OM 647.961 2003 S211 RIDEX PLUS 82B0720P Brake rotors Mercedes S211 E 270 CDI 2.7 163 hp Diesel 2009 price RIDEX PLUS 82B0720P Brake disc
RIDEX PLUS 82B0720P Brake disc Front Axle, 330x32mm, 5, internally vented, Grey Cast Iron
Article number: 82B0720P
Reviews - 1
    • Fitting Position: Front Axle
    • Payload: for increased payload
  • Fitting Position: Front Axle
  • Diameter [mm]: 330
  • Brake Disc Type: internally vented
  • Brake Disc Thickness [mm]: 32
  • Height [mm]: 65
  • Material: Grey Cast Iron
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 29,4
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Vehicle configuration line / variant: with bolts / screws
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 82B0720P
  • Manufacturer: RIDEX PLUS
  • EAN number: 4067448710133
  • Condition: New
Show OEM numbers of the product
Details
In stock
54,89 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 68,3
  • Material: Cast Iron
  • Surface: Uncoated
  • Centering Diameter [mm]: 67,1
  • Number of Holes: 5 / 6
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8,3
  • Inner Diameter [mm]: 180
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Vehicle configuration line / variant: + solid disc
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Drilled: no
  • Item number: SKBD-0020232
  • Manufacturer: STARK
  • EAN number: 4059191041718
  • Condition: New
Show OEM numbers of the product
Details
In stock
-41%
compared to RRP 55,30 €

32,52 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Construction Year to: 03 / 2005
    • Vehicle configuration line / variant: + solid disc
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Supplementary Info: Original VAICO Quality
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 68,3
  • Centering Diameter [mm]: 67
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8,3
  • Weight [kg]: 5,85
  • Brake Disc Hub Height [mm]: 58,1
  • Packaging width [cm]: 32
  • Packaging height [cm]: 15
  • Packaging Depth [cm]: 32
  • Drilled: no
  • Item number: V30-40044
  • Manufacturer: VAICO
  • EAN number: 4046001311925
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
-48%
compared to RRP 63,30 €

32,84 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Front Axle
  • Diameter [mm]: 295,1
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 28
  • Height [mm]: 54,6
  • Material: Cast Iron
  • Surface: Uncoated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5 / 6
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 25,4
  • Inner Diameter [mm]: 154
  • Machining: High-carbon
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Drilled: no
  • Item number: SKBD-0020164
  • Manufacturer: STARK
  • EAN number: 4059191032037
  • Condition: New
Show OEM numbers of the product
Details
In stock
-24%
compared to RRP 43,30 €

32,89 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Front Axle
  • Diameter [mm]: 295
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 28
  • Height [mm]: 54,5
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 25,4
  • Hub Diameter [mm]: 165
  • Weight [kg]: 7,2
  • Drilled: no
  • Item number: 17400
  • Manufacturer: A.B.S.
  • EAN number: 8717109254693
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 95,20 €

33,22 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
DELPHI BG3758 Brake disc Rear Axle, 300x22mm, 5, Vented
Article number: BG3758
Submit a review
    • Fitting Position: Rear Axle
    • Special Purpose Vehicle: for taxis
  • Diameter [mm]: 300
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 68
  • Surface: Oiled
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 19,4
  • Test Mark: E1 90R-02C0957 / 2557
  • Drilled: no
  • Item number: BG3758
  • Manufacturer: DELPHI
  • EAN number: 5012759280553
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 99,75 €

34,43 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 65,5
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 9,3
  • Weight [kg]: 10,51
  • Tightening Torque [Nm]: 130
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Packing Type: Box
  • Packaging length [cm]: 30,1
  • Packaging width [cm]: 30,1
  • Packaging height [cm]: 14
  • Drilled: no
  • Item number: 562213CH
  • Manufacturer: CHAMPION
  • EAN number: 4060426066796
  • Condition: New
Show OEM numbers of the product
Details
In stock
-44%
compared to RRP 62,34 €

34,57 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Brake System: ATE
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 65,5
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 9,3
  • Weight [kg]: 10,51
  • Tightening Torque [Nm]: 130
  • Version: JC
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Packing Type: Box
  • Packaging length [cm]: 33
  • Packaging width [cm]: 33
  • Packaging height [cm]: 16
  • Drilled: no
  • Item number: 562213JC
  • Manufacturer: JURID
  • EAN number: 3306437061780
  • Condition: New
Show OEM numbers of the product
Details
In stock
-54%
compared to RRP 76,03 €

34,62 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Fitting Position: Rear Axle
    • Special Purpose Vehicle: not for taxis
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Product line: COATED
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 68,3
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8,3
  • Hub Diameter [mm]: 168
  • Weight [kg]: 5,08
  • Drilled: no
  • Item number: 17402
  • Manufacturer: A.B.S.
  • EAN number: 8717109254716
  • Condition: New
Show OEM numbers of the product
Details
In stock
-45%
compared to RRP 64,44 €

34,84 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
    • Construction Year to: 03 / 2005
    • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 68,3
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 15,3
  • Drilled: no
  • Item number: 0 986 479 041
  • Manufacturer: BOSCH
  • EAN number: 3165143686553
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 101,74 €

35,27 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 67,2
  • Material: Cast Iron
  • Surface: Uncoated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5 / 6
  • Wheel Bolt Bore Diameter [mm]: 15,4
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 19,4
  • Inner Diameter [mm]: 180
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: without bolts / screws
  • Drilled: no
  • Item number: SKBD-0022011
  • Manufacturer: STARK
  • EAN number: 4059191064830
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 4)
-46%
compared to RRP 66,80 €

36,01 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Product line: COATED DISC LINE
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 66
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 8,3
  • Tightening Torque [Nm]: 130
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 08.9584.11
  • Manufacturer: BREMBO
  • EAN number: 8020584025444
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 104,47 €

36,41 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
  • Fitting Position: Rear Axle
  • Diameter [mm]: 300
  • Brake Disc Type: solid
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 65,5
  • Surface: Coated
  • Centering Diameter [mm]: 67
  • Number of Holes: 5
  • Minimum thickness [mm]: 9,3
  • Weight [kg]: 10,51
  • Tightening Torque [Nm]: 130
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Packing Type: Box
  • Packaging length [cm]: 30
  • Packaging width [cm]: 30
  • Packaging height [cm]: 14
  • Drilled: no
  • Item number: DDF1308C
  • Manufacturer: FERODO
  • EAN number: 4044197535521
  • Condition: New
Show OEM numbers of the product
Details
In stock
-52%
compared to RRP 76,03 €

36,45 €
Price per item

price incl. 19% VAT

excl. delivery costs

Add to comparison list

Here you can add a product to compare

Add to wish list
Load more
  • 1
  • 2
  • 3
  • 4
  • 5

How much will brake disc replacement cost for my MERCEDES-BENZ E-Class T-modell (S211) E270T CDI (211.216) 163hp / 120kW?

The cost of replacing brake discs ranges from 140 to 400 pounds

333ÌåÓýÖ±²¥Ãâ·ÑÔÚÏ߯½Ì¨ the best offers on