Renault Clio 1 1.2 Camshaft sensor (54 hp Petrol C3G 720)
- Sensor Type: Active sensor
- for OE number: 06A 905 161 B
- Item number: 108001
- Our price: 13,03 €
- Manufacturer: KAMOKA
- EAN number: 2218588214670
- Condition: New
- Number of pins: 2
- Cable Length [mm]: 925
- Product line: Original Quality
- Number of connectors: 2
- Resistor [Ohm]: 235
- Sensor Type: Inductive Sensor
- Colour: black
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Weight [kg]: 0,134
- Packaging width [cm]: 4,9, 8,8
- Packaging height [cm]: 5, 9,2
- Packaging Depth [cm]: 9, 96
- Item number: V46-72-0009
- Our price: 21,97 €
- Manufacturer: VEMO
- EAN number: 4046001331787
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article / Supplementary Info Info 2: with cable
- Number of connectors: 2
- Length [mm]: 290
- Height [mm]: 24
- Resistor [Ohm]: 240
- Item number: CS0340
- Our price: 23,37 €
- Manufacturer: CALORSTAT by Vernet
- EAN number: 3531650039517
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Number of pins: 2
- Cable Length [mm]: 250
- Product line: Original Quality
- Number of connectors: 2
- Required quantity: 1
- Resistor [Ohm]: 235
- Sensor Type: Inductive Sensor
- Colour: grey
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Weight [kg]: 0,088
- Packaging width [cm]: 4,9, 8,8
- Packaging height [cm]: 4,8, 9,2
- Packaging Depth [cm]: 29, 9
- Item number: V46-72-0004
- Our price: 27,32 €
- Manufacturer: VEMO
- EAN number: 4046001328893
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: C3G 700, C3G 720
- Sensor Type: Hall Sensor
- Item number: AS4239
- Our price: 11,69 €
- Manufacturer: AUTLOG
- EAN number: 4048488029942
- Condition: New
- Diameter [mm]: 238
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Fitting Position: Front Axle
- Height [mm]: 41
- Surface: Oiled
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 10,5
- Test Mark: E1 90R-02C0967 / 2516
- Drilled: no
- Item number: BG2217
- Manufacturer: DELPHI
- EAN number: 5012759422168
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 238
- Brake Disc Type: internally vented
- Brake System: BENDIX
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 17,7
- Drilled: no
- Item number: R1111V
- Manufacturer: LPR
- EAN number: 2503000863944
- Condition: New
- Diameter [mm]: 238
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12,0
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 61,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 10,5
- Inner Diameter [mm]: 129,5
- Bore Diameter [mm]: 12,8
- Drilled: no
- Item number: BAR12116
- Manufacturer: Barum
- EAN number: 4006633322263
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17,4
- Fitting Position: Front Axle
- Number of wear indicators [per axle]: 2
- Height [mm]: 64,9
- Width [mm]: 99,9
- Test Mark: E9 90R-02A0247 / 0966
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with brake caliper screws
- Warning Contact Length [mm]: 220
- MAPP code available
- Article number of recommended accessories: 13.0460-0240.2, 13.0460-0241.2
- Number of bolts / screws: 4
- Item number: 13.0460-2834.2
- Our price: 24,49 €
- Manufacturer: ATE
- EAN number: 4006633058070
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Bendix
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 18
- Fitting Position: Front Axle
- Number of wear indicators [per axle]: 2
- Height [mm]: 54,0
- Width [mm]: 105,0
- Warning Contact Length [mm]: 183
- MAPP code available
- Article number of recommended accessories: 13.0460-0402.2, 13.0460-0403.2, 13.0460-0404.2, 13.0460-0411.2
- Observe dimensions
- ABE No.: KBA 60521
- Item number: 13.0460-3911.2
- Our price: 19,73 €
- Manufacturer: ATE
- EAN number: 4006633096935
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 8,0
- Height [mm]: 74,6
- Surface: Coated
- Centering Diameter [mm]: 52,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 52,3
- Thread Size: M12x1,5
- MAPP code available
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Drilled: no
- Item number: 24.0108-0108.1
- Manufacturer: ATE
- EAN number: 4006633282024
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 238
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12,0
- Fitting Position: Front Axle
- Height [mm]: 41
- Surface: Coated
- Centering Diameter [mm]: 61,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 10,5
- Inner Diameter [mm]: 129,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1151
- Bore Diameter [mm]: 13,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0112-0116.1
- Manufacturer: ATE
- EAN number: 4006633083430
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 03 / 1996
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Bosch
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17,8
- Material: Low-Metallic
- Height [mm]: 53,7
- Width [mm]: 92,2
- WVA Number: 20905
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Article number of recommended accessories: 1987474028, 1987474038, 1987474072, 1987474078, 1987474362, 1987474135, 1987474179, 1987474196, 1987474097
- Observe technical data
- Item number: 0 986 469 860
- Our price: 19,26 €
- Manufacturer: BOSCH
- EAN number: 3165143727478
- Condition: New
-
- Fitting Position: Front Axle
- Manufacturer Restriction: Bendix
- Quantity Unit: Axle Set
- Brake System: Bendix
- Wear Warning Contact: with integrated wear warning contact
- Thickness [mm]: 18
- Height [mm]: 53,9
- Width [mm]: 105,3
- WVA Number: 20905
- Weight [kg]: 1,1
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2090506
- Our price: 18,14 €
- Manufacturer: TEXTAR
- EAN number: 4019722069598
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 238
- Brake Disc Type: solid
- Brake System: TRW
- Brake Disc Thickness [mm]: 12
- Fitting Position: Front Axle
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 10,5
- Drilled: no
- Item number: R1081P
- Manufacturer: LPR
- EAN number: 8032532074206
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 8
- Height [mm]: 74,6
- Centering Diameter [mm]: 52,3
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Drilled: no
- Item number: R1391P
- Manufacturer: LPR
- EAN number: 8032532074398
- Condition: New
price incl. 19% VAT
-
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Bendix
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 11
- Height [mm]: 54,9
- Width [mm]: 105,0
- Test Mark: E1 90R-01891 / 777
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- MAPP code available
- Number of bolts / screws: 4
- Thread Size: M5
- Bolt Head- / Nut Design: Female Torx
- Item number: 13.0460-3822.2
- Our price: 27,11 €
- Manufacturer: ATE
- EAN number: 4006633219105
- Condition: New
-
- Construction Year to: 03 / 1996
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Lucas-Girling
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 18
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 64,9
- Width [mm]: 100
- WVA Number: 21463
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with anti-squeak plate
- Article number of recommended accessories: 1987474038, 1987474078, 1987474098, 1987474135, 1987474749, 1987474195, 1987474401, 1987474413, 1987474696, 1987474179
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 467 720
- Our price: 17,28 €
- Manufacturer: BOSCH
- EAN number: 3165143767986
- Condition: New
-
- Construction Year to: 03 / 1996
- Fitting Position: Front Axle
- Diameter [mm]: 237,8
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 11,9
- Height [mm]: 41
- Surface: Oiled
- Centering Diameter [mm]: 61
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13
- Drilled: no
- Item number: 0 986 478 105
- Manufacturer: BOSCH
- EAN number: 3165142569529
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Manufacturer Restriction: Lucas
- Quantity Unit: Axle Set
- Brake System: Lucas
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 18,2
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 1
- Height [mm]: 64,8
- Width [mm]: 100,1
- WVA Number: 21463
- Weight [kg]: 1,1
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2146304
- Our price: 22,42 €
- Manufacturer: TEXTAR
- EAN number: 4019722252068
- Condition: New