Vehicle identification number: 3333191
RENAULT Megane II Saloon (LM) 1.6 16V Control, blending flap (112 hp Petrol K4M 760)
-
- Construction Year to: 10 / 2008
- Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Weight [kg]: 0,11
- Type of actuator: Step-by-step, single pole
- Item number: 509604
- Our price: 31,01 €
- Manufacturer: VALEO
- EAN number: 3276425096042
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2008
- Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Weight [kg]: 0,145
- Item number: 509603
- Our price: 23,82 €
- Manufacturer: VALEO
- EAN number: 3276425096035
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2008
- Vehicle Equipment: for vehicles with automatic climate control
- Operating Mode: Electric
- Number of pins: 6
- for OE number: 77 01 207 720
- Item number: V46-77-0031
- Our price: 75,22 €
- Manufacturer: VEMO
- EAN number: 4062375118045
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2008
- Vehicle Equipment: for vehicles with automatic climate control
- Operating Mode: Electric
- Number of pins: 6
- for OE number: 77 01 207 721
- Item number: V46-77-0030
- Our price: 100,05 €
- Manufacturer: VEMO
- EAN number: 4062375118038
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 8
- Height [mm]: 80
- Surface: Painted
- Centering Diameter [mm]: 52,3
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 7
- Thread Size: M12 x 1,5
- Colour: black
- Drilled: no
- Item number: C4R018ABE
- Manufacturer: ABE
- EAN number: 5900427206229
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Construction Year to: 12 / 2010
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 44
- Surface: Oiled
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 21,8
- Test Mark: E1 90R-02C0959 / 2591
- Drilled: no
- Item number: BG3430
- Manufacturer: DELPHI
- EAN number: 5012759091562
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Thickness [mm]: 8
- Height [mm]: 80,6
- Centering Diameter [mm]: 25
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 175
- Supplementary Article / Supplementary Info: with accessories
- Drilled: no
- Item number: R1005PCA
- Manufacturer: LPR
- EAN number: 8032928087803
- Condition: New
Nut and dust cap included.
-
- Construction Year from: 01 / 2007
- Construction Year to: 12 / 2008
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 44
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Drilled: no
- Item number: R1583V
- Manufacturer: LPR
- EAN number: 8032532074473
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: ATE
- Quantity Unit: Axle Set
- Height [mm]: 69,0
- Width [mm]: 156,4
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 18,0
- Production Number: 6005290
- Item number: 6005290
- Our price: 45,58 €
- Manufacturer: KRAFT
- EAN number: 5900427189973
- Condition: New
- Fitting Position: Front Axle
- Brake System: Bosch
- Quantity Unit: Axle Set
- Height [mm]: 59,5
- Width [mm]: 136,8
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 18,2
- Production Number: 6005135
- Item number: 6005135
- Our price: 25,62 €
- Manufacturer: KRAFT
- EAN number: 5900427189966
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Quantity Unit: Axle Set
- Height [mm]: 66,7
- Width [mm]: 156,4
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 18,3
- Production Number: 6005139
- Item number: 6005139
- Our price: 36,80 €
- Manufacturer: KRAFT
- EAN number: 5900427190023
- Condition: New
-
- Construction Year from: 05 / 2007, 01 / 2007
- Construction Year to: 12 / 2008, 04 / 2007
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 16,4
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0077.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2845.2
- Our price: 26,47 €
- Manufacturer: ATE
- EAN number: 4006633040587
- Condition: New
-
- Construction Year from: 01 / 2007
- Construction Year to: 12 / 2008
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 18,3
- Quantity Unit: Axle Set
- Height 1 [mm]: 68,9
- Height 2 [mm]: 66,8
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1251 / 4453
- MAPP code available
- Item number: 13.0460-7221.2
- Our price: 45,90 €
- Manufacturer: ATE
- EAN number: 4006633288729
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 01 / 2007
- Construction Year to: 12 / 2008
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,0
- Height [mm]: 44
- Surface: Coated
- Centering Diameter [mm]: 61,0
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100,0
- Minimum thickness [mm]: 21,8
- Inner Diameter [mm]: 140,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0270
- Bore Diameter [mm]: 13,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0124-0158.1
- Manufacturer: ATE
- EAN number: 4006633033183
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: TRW
- Supplementary Article / Supplementary Info Info 2: with ABS sensor ring
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 8
- Height [mm]: 80,6
- Surface: Oiled
- Centering Diameter [mm]: 25
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Test Mark: E1 90R-02C0543 / 1779
- Supplementary Article / Supplementary Info Info 2: with wheel bearing, with ABS sensor ring
- Drilled: no
- Item number: BG9028RS
- Manufacturer: DELPHI
- EAN number: 5012759396308
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 44
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 21,8
- Hub Bore Diameter [mm]: 61
- Drilled: no
- Item number: BDC5143
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593643482
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 8
- Height [mm]: 80,6
- Centering Diameter [mm]: 52
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 7
- only in connection with: QWB1256
- Supplementary Article / Supplementary Info Info 2: without integrated wheel bearing, without integrated magnetic sensor ring
- Drilled: no
- Item number: BDC5474
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593478718
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 01 / 2007
- Construction Year to: 12 / 2008
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 15,8
- Quantity Unit: Axle Set
- Height [mm]: 51,9
- Width [mm]: 123
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe dimensions
- Item number: 13.0460-7137.2
- Our price: 33,73 €
- Manufacturer: ATE
- EAN number: 4006633075633
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 01 / 2007
- Construction Year to: 12 / 2008
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 8,0
- Height [mm]: 80,6
- Surface: Coated
- Centering Diameter [mm]: 52,3
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 55,0
- Support plate diameter [mm]: 25
- Thread Size: M12x1,5
- MAPP code available
- Test Mark: E1 90R-02C0444 / 2502
- Supplementary Article / Supplementary Info Info 2: with wheel bearing, with ABS sensor ring
- Drilled: no
- Item number: 24.0108-0114.2
- Manufacturer: ATE
- EAN number: 4006633322850
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 01 / 2007
- Construction Year to: 12 / 2008
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 24,0
- Height [mm]: 44
- Surface: Coated
- Centering Diameter [mm]: 61,0
- Number of Holes: 4
- Bolt Hole Circle 脴 [mm]: 100,0
- Minimum thickness [mm]: 21,8
- Inner Diameter [mm]: 140,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Bore Diameter [mm]: 13,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0324-0158.1
- Manufacturer: ATE
- EAN number: 4006633120050
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs