Vectra C GTS 3.2 V6 Control, blending flap (211 hp Petrol Z 32 SE)
-
- Construction Year to: 09 / 2005
- Vehicle Equipment: for vehicles with automatic climate control
- Number of pins: 6
- Weight [kg]: 0,146
- Item number: 715288
- Our price: 72,29 €
- Manufacturer: VALEO
- EAN number: 3276427152883
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 09 / 2005
- Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Number of pins: 5
- Weight [kg]: 0,17
- Item number: 515126
- Our price: 51,01 €
- Manufacturer: VALEO
- EAN number: 3276425151260
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 09 / 2005
- Vehicle Equipment: for vehicles with automatic climate control
- Operating Mode: Electric
- Item number: V40-77-0030
- Our price: 103,19 €
- Manufacturer: VEMO
- EAN number: 4062375117727
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 09 / 2005
- Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Operating Mode: Electric
- Item number: V40-77-0029
- Our price: 144,87 €
- Manufacturer: VEMO
- EAN number: 4062375117710
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Fitting Position: Front Axle
- Height [mm]: 45
- Surface: Coated
- Centering Diameter [mm]: 70
- Number of Holes: 7
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 25
- Inner Diameter [mm]: 139
- Machining: High-carbon
- Vehicle Identification Number (VIN) to: 31070293
- Bore Diameter [mm]: 14
- Drilled: no
- Item number: C3X033ABE
- Manufacturer: ABE
- EAN number: 5900427202245
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Fitting Position: Front Axle
- Height [mm]: 44,8
- Centering Diameter [mm]: 70
- Number of Holes: 7
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 25
- Thread Size: 15
- Drilled: no
- Item number: C3X035ABE
- Manufacturer: ABE
- EAN number: 5900427202269
- Condition: New
price incl. 19% VAT
-
- Construction Year from: 05 / 2003
- Construction Year to: 07 / 2005
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 20,3
- Fitting Position: Front Axle
- Material: Low-Metallic
- Number of wear indicators [per axle]: 2
- Height [mm]: 77,5
- Height 2 [mm]: 77,5
- Width [mm]: 156,5
- Width 2 [mm]: 155,1
- Thickness 2 [mm]: 20,4
- Number of pads: 4
- WVA Number: 23404
- Test Mark: ECE-R90
- Manufacturer Restriction: ATE
- Number of springs: 2
- Item number: C1X031ABE
- Our price: 30,65 €
- Manufacturer: ABE
- EAN number: 5900427191051
- Condition: New
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Construction Year to: 07 / 2005
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 7
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 18
- Thread Size: 14,2
- Drilled: no
- Item number: C4X018ABE
- Manufacturer: ABE
- EAN number: 5900427206977
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: 31070293
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 25
- Drilled: no
- Item number: BDC5421
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114324
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: Ate
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 41,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 18
- Drilled: no
- Item number: BDC5422
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114270
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7194.2
- Our price: 31,05 €
- Manufacturer: ATE
- EAN number: 4006633127691
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
-
- Vehicle Identification Number (VIN) from: 31070294 / 38047798, 48045598
- Vehicle Identification Number (VIN) to: 48045597
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Height 1 [mm]: 74,5
- Height 2 [mm]: 77,6
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,6
- Thickness 2 [mm]: 20,1
- Test Mark: E1 90R-01937 / 735
- MAPP code available
- Article number of recommended accessories: 24.8190-0721.2, 24.8190-0722.2
- Observe dimensions
- Item number: 13.0460-7199.2
- Our price: 50,57 €
- Manufacturer: ATE
- EAN number: 4006633188241
- Condition: New
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Fitting Position: Front Axle
- Height [mm]: 44,8
- Surface: Oiled
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Test Mark: E1 90R-02C0289 / 1854
- Drilled: no
- Item number: BG3973
- Manufacturer: DELPHI
- EAN number: 5012759360712
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) to: 31070293 / 38047797
- Fitting Position: Front Axle
- Diameter [mm]: 302,3
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45,2
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Drilled: no
- Item number: O1002V
- Manufacturer: LPR
- EAN number: 8032532099063
- Condition: New
-
- Vehicle Identification Number (VIN) from: 31070294, 38047798
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45,2
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Drilled: no
- Item number: O1008V
- Manufacturer: LPR
- EAN number: 8032928001724
- Condition: New
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: O1014P
- Manufacturer: LPR
- EAN number: 8032928001694
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- Diameter [mm]: 292
- Height [mm]: 41,4
- Centering Diameter [mm]: 65,5
- Minimum thickness [mm]: 18
- Drilled: no
- Item number: O1016V
- Manufacturer: LPR
- EAN number: 8032928003032
- Condition: New
-
- Vehicle Identification Number (VIN) to: 31070293 / 38047797
- Brake Caliper Type: for brake caliper with plastic piston
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0460-7172.2
- Our price: 42,72 €
- Manufacturer: ATE
- EAN number: 4006633105095
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) from: 41096249 / 48091179
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 34,57 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
-
- Vehicle Identification Number (VIN) to: 31070293 / 38047797
- Brake Caliper Type: for brake calipers with steel pistons
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Item number: 13.0460-7212.2
- Our price: 44,23 €
- Manufacturer: ATE
- EAN number: 4006633274289
- Condition: New