AUDI A6 Avant (4G5, 4GD, C7) 3.0 TFSI quattro (245 kW / 333 hp) 2014
Vehicle identification number: 0588BBT
Vehicle identification number: 0588BBT
Audi A6 C7 Avant 3.0 TFSI quattro Control unit, glow plug system (333 hp Petrol CREC)
2 items
BOSCH 0 332 201 107 Glow plug relay 12V, 30A, 5-pin connector
Article number: 0 332 201 107
Reviews - 18
- Current Strength [A]: 30
- Voltage [V]: 12
- Number of pins: 5
- Relay function: Normally open contact
- Protection Type (IP Code): IP5K4
- Temperature range from [掳C]: -40
- Temperature range to [掳C]: 100
- Resistor [Ohm]: 16
- Item number: 0 332 201 107
- Our price: 4,91 €
- Manufacturer: BOSCH
- EAN number: 1165244314678
- Condition: New
Show OEM numbers of the product
Details
VEMO V30-71-0041 Glow plug relay 12V, 4-pin connector, Original VEMO Quality
Article number: V30-71-0041
Reviews - 9
- Supplementary Info: Original VEMO Quality
- Voltage [V]: 12
- Colour: black
- Number of pins: 4
- Number of connectors: 4
- Rated Voltage [V]: 12
- Relay function: Clamp 87, Terminal 30, Normally open contact
- Supplementary Article / Supplementary Info Info 2: with resistor
- Housing Colour: black
- Rated current [A]: 70
- Fitting Position: Engine Compartment
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Item number: V30-71-0041
- Our price: 15,59 €
- Manufacturer: VEMO
- EAN number: 4046001880759
- Condition: New
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
AUDI A6 Avant (4G5, 4GD, C7) 3.0 TFSI quattro Bestsellers
DELPHI LP2249 Brake pad set Rear Axle, incl. wear warning contact
Article number: LP2249
Submit a review
-
- Fitting Position: Rear Axle
- Vehicle type: A6 Quattro, A6 Allroad Quattro
- for brake disc diameter [mm]: 330, 300
- for PR number: 2EA, 2EJ, 1KW
- for article number: LX0383, LX0541
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 300, 330
- for PR number: 1KW, 2EE, 1KD
-
- for article number: LX0541, LX0383
- for PR number: 2EA, 2EJ
- Vehicle type: A6 Allroad Quattro
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 330
- for PR number: 2EA
- Quantity Unit: Axle Set
- Brake System: TRW
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 58,5
- Height 2 [mm]: 59,5
- Width 2 [mm]: 116,7
- Width 1 [mm]: 116,8
- Thickness 1 [mm]: 17,3
- Thickness 2 [mm]: 17,3
- WVA Number: 24606, 25214
- Test Mark: E1 90R-01878 / 1948
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1547-8785
- Friction Lining Material: Semi-Metallic
- Item number: LP2249
- Our price: 33,94 €
- Manufacturer: DELPHI
- EAN number: 5012759465219
- Condition: New
Show OEM numbers of the product
Additional information
2 pairs of pads
Details
ATE 24.0112-0178.1 Brake disc Rear Axle, 300,0x12,0mm, 5x112,0, solid
Article number: 24.0112-0178.1
Reviews - 34
-
- for PR number: 1KW
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 36,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 169,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0949
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0112-0178.1
- Manufacturer: ATE
- EAN number: 4006633310222
- Condition: New
Show OEM numbers of the product
Details
In stock
-61%
compared to
RRP 143,28 €
55,60 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN COAT Z 100.3355.20 Brake disc Front Axle, 320x30mm, 6/5, 5x112, internally vented
Article number: 100.3355.20
Reviews - 9
-
- Fitting Position: Front Axle
- for PR number: 1LA
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 28
- Weight [kg]: 10,1
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3355.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750581
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-68%
compared to
RRP 214,87 €
66,83 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN SPORT COAT Z 100.3356.52 Brake disc Front Axle, 345x30mm, 6/5, 5x112, internally vented, Perforated
Article number: 100.3356.52
Reviews - 20
-
- Fitting Position: Front Axle
- for PR number: 1LP, 1LJ
- Diameter [mm]: 345
- Brake Disc Type: internally vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 28
- Weight [kg]: 11,10
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 100.3356.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238752905
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-56%
compared to
RRP 238,69 €
104,00 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN COAT Z 100.3357.20 Brake disc Front Axle, 356x34mm, 6/5, 5x112, internally vented
Article number: 100.3357.20
Reviews - 2
-
- Fitting Position: Front Axle
- for PR number: 1LL, 1LF, 1ZK
- Diameter [mm]: 356
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 34
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 31,5
- Weight [kg]: 13,6
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3357.20
- Manufacturer: ZIMMERMANN
- EAN number: 2503000675400
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 4)
80,52 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN COAT Z 100.3358.20 Brake disc Rear Axle, 330x22mm, 6/5, 5x112, internally vented
Article number: 100.3358.20
Reviews - 5
-
- Fitting Position: Rear Axle
- for PR number: 2EA, 2EE, 2EJ
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3358.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750611
- Condition: New
Show OEM numbers of the product
Details
In stock
-74%
compared to
RRP 202,41 €
50,83 €
Price per item
price incl. 19% VAT
excl. delivery costs
BOSCH 0 986 479 747 Brake disc Front Axle, 345x30mm, 5x112, Vented
Article number: 0 986 479 747
Reviews - 16
-
- Fitting Position: Front Axle
- for PR number: 1LJ, 1LP
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 52,1
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 28
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 747
- Manufacturer: BOSCH
- EAN number: 4047024887169
- Condition: New
Show OEM numbers of the product
Details
BOSCH 0 986 479 749 Brake disc Rear Axle, 356x22mm, 5x112, Vented
Article number: 0 986 479 749
Submit a review
-
- Fitting Position: Rear Axle
- for PR number: 1KY, 1KZ
- Diameter [mm]: 356
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,3
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 749
- Manufacturer: BOSCH
- EAN number: 4047024887145
- Condition: New
Show OEM numbers of the product
Details
BOSCH 0 986 479 750 Brake disc Rear Axle, 330x22mm, 5x112, Vented
Article number: 0 986 479 750
Reviews - 29
-
- Fitting Position: Rear Axle
- for PR number: 2EA, 2EE, 2EJ, 1KD
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,2
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,1
- Drilled: no
- Item number: 0 986 479 750
- Manufacturer: BOSCH
- EAN number: 4047024887084
- Condition: New
Show OEM numbers of the product
Details
In stock
-74%
compared to
RRP 193,97 €
50,07 €
Price per item
price incl. 19% VAT
excl. delivery costs
QUINTON HAZELL BDC5712 Brake disc Rear Axle, 330x22mm, 5x112, Vented
Article number: BDC5712
Submit a review
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 36,4
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: BDC5712
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159899
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-60%
compared to
RRP 187,42 €
74,63 €
Price per item
price incl. 19% VAT
excl. delivery costs
BOSCH 0 986 494 201 Brake pad set Front Axle, Low-Metallic, incl. wear warning contact
Article number: 0 986 494 201
Reviews - 50
-
- Fitting Position: Front Axle
- for PR number: 1LA, 1LJ
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19
- Material: Low-Metallic
- Height 1 [mm]: 73
- Height 2 [mm]: 73,6
- Width [mm]: 188
- WVA Number: 24310
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with piston clip, with bolts / screws
- Article number of recommended accessories: 1987473583, 1987473623, 1987474517, 1987474507, 1987474505
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 494 201
- Our price: 56,02 €
- Manufacturer: BOSCH
- EAN number: 4047024558618
- Condition: New
Show OEM numbers of the product
Details
BREMBO COATED DISC LINE 08.A759.11 Brake disc Rear Axle, 300x12mm, 5, solid
Article number: 08.A759.11
Reviews - 27
-
- Fitting Position: Rear Axle
- for PR number: 1KW
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 12
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.A759.11
- Manufacturer: BREMBO
- EAN number: 8020584023600
- Condition: New
Show OEM numbers of the product
Details
ZIMMERMANN COAT Z 100.3333.20 Brake disc Rear Axle, 300x12mm, 6/5, 5x112, solid
Article number: 100.3333.20
Reviews - 15
-
- Fitting Position: Rear Axle
- for PR number: 1KW
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: COAT Z
- Brake Disc Thickness [mm]: 12
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 10
- Weight [kg]: 5,2
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3333.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238720553
- Condition: New
Show OEM numbers of the product
Details
In stock
-69%
compared to
RRP 143,24 €
43,67 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN COAT Z 100.3356.20 Brake disc Front Axle, 345x30mm, 6/5, 5x112, internally vented
Article number: 100.3356.20
Reviews - 4
-
- Fitting Position: Front Axle
- for PR number: 1LP, 1LJ
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 28
- Weight [kg]: 11,10
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3356.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750598
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-68%
compared to
RRP 244,00 €
76,30 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN SPORT COAT Z 100.3358.52 Brake disc Rear Axle, 330x22mm, 6/5, 5x112, internally vented, Perforated
Article number: 100.3358.52
Reviews - 39
-
- Fitting Position: Rear Axle
- for PR number: 2EA, 2EE, 2EJ
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 100.3358.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238752912
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-61%
compared to
RRP 225,26 €
87,51 €
Price per item
price incl. 19% VAT
excl. delivery costs
DELPHI LP2238 Brake pad set Front Axle, incl. wear warning contact
Article number: LP2238
Submit a review
-
- Fitting Position: Front Axle
- Construction Year to: 10 / 2014
- for brake disc diameter [mm]: 356
- for PR number: 1LL, 1ZK
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 73,7
- Height 2 [mm]: 71,1
- Width 2 [mm]: 193,4
- Width 1 [mm]: 193,4
- Thickness 1 [mm]: 20
- Thickness 2 [mm]: 20
- WVA Number: 25159, 25158
- Test Mark: E9 90R-01841 / 2961
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1549-8758
- Friction Lining Material: Semi-Metallic
- Item number: LP2238
- Our price: 52,89 €
- Manufacturer: DELPHI
- EAN number: 5012759459690
- Condition: New
Show OEM numbers of the product
Additional information
2 pairs of pads
Details
In stock (Item(s) left: 1)
-71%
compared to
RRP 184,71 €
52,89 €
price incl. 19% VAT
excl. delivery costs
DELPHI LP2239 Brake pad set Front Axle, incl. wear warning contact
Article number: LP2239
Submit a review
-
- Fitting Position: Front Axle
- Vehicle type: A6 Quattro
- for brake disc diameter [mm]: 356
- for PR number: 1LL, 1ZK
- for article number: LX0632
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 356
- for PR number: 1LL, 1ZK
- for model code: A6 Quattro
- Vehicle type: A6 Quattro
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 76,4
- Height 2 [mm]: 76,4
- Width 2 [mm]: 193,2
- Width 1 [mm]: 193,3
- Thickness 1 [mm]: 20
- Thickness 2 [mm]: 20
- WVA Number: 25160, 25161
- Test Mark: E9 90R-01841 / 3088
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1546-8754
- Friction Lining Material: Semi-Metallic
- Item number: LP2239
- Our price: 63,72 €
- Manufacturer: DELPHI
- EAN number: 5012759464458
- Condition: New
Show OEM numbers of the product
Additional information
2 pairs of pads
Details
FEBI BILSTEIN 16823 Brake pad set Front Axle, prepared for wear warning indicator
Article number: 16823
Submit a review
-
- for brake disc diameter [mm]: 356
- for PR number: 1ZK
-
- for brake disc diameter [mm]: 356
- for PR number: 1LL
-
- for brake disc diameter [mm]: 356
- for PR number: 1LG
-
- for brake disc diameter [mm]: 356
- for PR number: 1LF
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator
- Fitting Position: Front Axle
- Length [mm]: 193
- Width [mm]: 73,8, 70,8
- Thickness 1 [mm]: 20
- Test Mark: ECE R90 Approved
- Weight [kg]: 3,07
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Observe service information
- Item number: 16823
- Our price: 53,85 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816168232
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
333体育直播免费在线平台 the best offers on