AUDI A8 (4H2, 4H8, 4HC, 4HL) 3.0 TFSI quattro (245 kW / 333 hp) 2010
Audi A8 D4 3.0 TFSI quattro Control unit, glow plug system (333 hp Petrol CTDA)
2 items
BOSCH 0 332 201 107 Glow plug relay 12V, 30A, 5-pin connector
Article number: 0 332 201 107
Reviews - 18
- Current Strength [A]: 30
- Voltage [V]: 12
- Number of pins: 5
- Relay function: Normally open contact
- Protection Type (IP Code): IP5K4
- Temperature range from [掳C]: -40
- Temperature range to [掳C]: 100
- Resistor [Ohm]: 16
- Item number: 0 332 201 107
- Our price: 4,91 €
- Manufacturer: BOSCH
- EAN number: 1165244314678
- Condition: New
Show OEM numbers of the product
Details
VEMO V30-71-0041 Glow plug relay 12V, 4-pin connector, Original VEMO Quality
Article number: V30-71-0041
Reviews - 9
- Supplementary Info: Original VEMO Quality
- Voltage [V]: 12
- Colour: black
- Number of pins: 4
- Number of connectors: 4
- Rated Voltage [V]: 12
- Relay function: Clamp 87, Terminal 30, Normally open contact
- Supplementary Article / Supplementary Info Info 2: with resistor
- Housing Colour: black
- Rated current [A]: 70
- Fitting Position: Engine Compartment
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Item number: V30-71-0041
- Our price: 15,59 €
- Manufacturer: VEMO
- EAN number: 4046001880759
- Condition: New
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
AUDI A8 (4H2, 4H8, 4HC, 4HL) 3.0 TFSI quattro Bestsellers
ZIMMERMANN COAT Z 100.3357.20 Brake disc Front Axle, 356x34mm, 6/5, 5x112, internally vented
Article number: 100.3357.20
Reviews - 2
-
- Fitting Position: Front Axle
- for PR number: 1LL
- Diameter [mm]: 356
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 34
- Height [mm]: 52
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 31,5
- Weight [kg]: 13,6
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3357.20
- Manufacturer: ZIMMERMANN
- EAN number: 2503000675400
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 4)
80,52 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN COAT Z 100.3358.20 Brake disc Rear Axle, 330x22mm, 6/5, 5x112, internally vented
Article number: 100.3358.20
Reviews - 5
-
- Fitting Position: Rear Axle
- for PR number: 1KW
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3358.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750611
- Condition: New
Show OEM numbers of the product
Details
In stock
-71%
compared to
RRP 202,41 €
58,35 €
Price per item
price incl. 19% VAT
excl. delivery costs
DELPHI LP2226 Brake pad set Rear Axle, incl. wear warning contact
Article number: LP2226
Submit a review
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 330, 356
- for PR number: 1KW, 1KY
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 356
- for PR number: 1KY
- Quantity Unit: Axle Set
- Brake System: TRW
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 59,5
- Height 2 [mm]: 58,5
- Width 2 [mm]: 116,7
- Width 1 [mm]: 116,7
- Thickness 1 [mm]: 17,3
- Thickness 2 [mm]: 17,3
- WVA Number: 24606, 25214
- Test Mark: E1 90R-01878 / 1721
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1547-8755
- Friction Lining Material: Semi-Metallic
- Item number: LP2226
- Our price: 36,54 €
- Manufacturer: DELPHI
- EAN number: 5012759455791
- Condition: New
Show OEM numbers of the product
Additional information
2 pairs of pads + W.I.
Details
FEBI BILSTEIN 16823 Brake pad set Front Axle, prepared for wear warning indicator
Article number: 16823
Submit a review
-
- for brake disc diameter [mm]: 356
- for PR number: 1LL
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator
- Fitting Position: Front Axle
- Length [mm]: 193
- Width [mm]: 73,8, 70,8
- Thickness 1 [mm]: 20
- Test Mark: ECE R90 Approved
- Weight [kg]: 3,07
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Observe service information
- Item number: 16823
- Our price: 53,85 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816168232
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
TRW GDB1866 Brake pad set Rear Axle, incl. wear warning contact
Article number: GDB1866
Reviews - 3
-
- Fitting Position: Rear Axle
- for PR number: 1KY
- for brake disc diameter [mm]: 356
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17,3
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 58,8
- Height 2 [mm]: 60
- Width [mm]: 116,4
- Test Mark: E9 90R - 01120 / 2358
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Manufacturer Restriction: TRW
- Warning Contact Length [mm]: 297
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Observe technical data
- Item number: GDB1866
- Our price: 55,45 €
- Manufacturer: TRW
- EAN number: 3322938024109
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 1)
-66%
compared to
RRP 167,91 €
55,45 €
price incl. 19% VAT
excl. delivery costs
TRW COTEC GDB1867 Brake pad set Rear Axle, incl. wear warning contact
Article number: GDB1867
Submit a review
-
- Fitting Position: Rear Axle
- for PR number: 1KW
- for brake disc diameter [mm]: 330
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17,3
- Product line: COTEC
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 58,8
- Height 2 [mm]: 60
- Width [mm]: 116,4
- Test Mark: E9 90R - 01120 / 2358
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Manufacturer Restriction: TRW
- Warning Contact Length [mm]: 296
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Observe technical data
- Item number: GDB1867
- Our price: 52,74 €
- Manufacturer: TRW
- EAN number: 3322938024116
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 1)
-68%
compared to
RRP 167,91 €
52,74 €
price incl. 19% VAT
excl. delivery costs
DELPHI LP2292 Brake pad set Front Axle, prepared for wear warning indicator
Article number: LP2292
Submit a review
-
- Fitting Position: Front Axle
- Brake System: Teves
- Wear Warning Contact: not prepared for wear warning indicator
- for PR number: 1LJ
- for article number: LX0632
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Height 1 [mm]: 76,3
- Height 2 [mm]: 76,3
- Width 2 [mm]: 193,2
- Width 1 [mm]: 193,3
- Thickness 1 [mm]: 20
- Thickness 2 [mm]: 20
- WVA Number: 25160, 25161
- Test Mark: E1 90R-011041 / 1966
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1546-8754
- Friction Lining Material: Semi-Metallic
- Item number: LP2292
- Our price: 56,10 €
- Manufacturer: DELPHI
- EAN number: 5012759467534
- Condition: New
Show OEM numbers of the product
Additional information
2 pairs of pads
Details
In stock (Item(s) left: 2)
-71%
compared to
RRP 200,05 €
56,10 €
price incl. 19% VAT
excl. delivery costs
ATE 24.0134-0103.1 Brake disc Front Axle, 356,0x34,0mm, 5x112,0, Vented
Article number: 24.0134-0103.1
Reviews - 15
-
- Construction Year from: 07 / 2010
- for PR number: 1LL
- Fitting Position: Front Axle
- Diameter [mm]: 356,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 34,0
- Height [mm]: 52,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112,0
- Minimum thickness [mm]: 31,5
- Inner Diameter [mm]: 149,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 1004
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0134-0103.1
- Manufacturer: ATE
- EAN number: 4006633382069
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-64%
compared to
RRP 365,57 €
128,32 €
Price per item
price incl. 19% VAT
ATE 24.0122-0272.1 Brake disc Rear Axle, 330,0x21,9mm, 5x112,0, Vented
Article number: 24.0122-0272.1
Reviews - 28
-
- Construction Year from: 07 / 2010
- for PR number: 1KW
- Vehicle Equipment: for vehicles with electric parking brake
- Fitting Position: Rear Axle
- Diameter [mm]: 330,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 147,7
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0603
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0272.1
- Manufacturer: ATE
- EAN number: 4006633381420
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-60%
compared to
RRP 194,80 €
77,10 €
Price per item
price incl. 19% VAT
excl. delivery costs
BOSCH 0 986 479 749 Brake disc Rear Axle, 356x22mm, 5x112, Vented
Article number: 0 986 479 749
Submit a review
-
- TecDoc Engine Number: CMDA, CGXC, CTUB
- Construction Year to: 04 / 2014
- Fitting Position: Rear Axle
- for PR number: 1KY, 1KZ, 1KE
-
- TecDoc Engine Number: CREC, CTDA
- Construction Year from: 09 / 2013
- Fitting Position: Rear Axle
- for PR number: 1KY, 1KZ, 1KE
- Diameter [mm]: 356
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,3
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 749
- Manufacturer: BOSCH
- EAN number: 4047024887145
- Condition: New
Show OEM numbers of the product
Details
BOSCH 0 986 479 750 Brake disc Rear Axle, 330x22mm, 5x112, Vented
Article number: 0 986 479 750
Reviews - 29
-
- TecDoc Engine Number: CMDA, CGXC, CTUB
- Construction Year to: 04 / 2014
- Fitting Position: Rear Axle
- for PR number: 1KW
-
- TecDoc Engine Number: CREC, CTDA
- Construction Year from: 09 / 2013
- Fitting Position: Rear Axle
- for PR number: 1KW
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,2
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,1
- Drilled: no
- Item number: 0 986 479 750
- Manufacturer: BOSCH
- EAN number: 4047024887084
- Condition: New
Show OEM numbers of the product
Details
In stock
-74%
compared to
RRP 193,97 €
50,07 €
Price per item
price incl. 19% VAT
excl. delivery costs
ZIMMERMANN SPORT COAT Z 100.3358.52 Brake disc Rear Axle, 330x22mm, 6/5, 5x112, internally vented, Perforated
Article number: 100.3358.52
Reviews - 39
-
- Fitting Position: Rear Axle
- for PR number: 1KW
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 100.3358.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238752912
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-61%
compared to
RRP 225,26 €
87,51 €
Price per item
price incl. 19% VAT
excl. delivery costs
FEBI BILSTEIN 36454 Brake disc Rear Axle, 330x22mm, 5x112, internally vented
Article number: 36454
Reviews - 3
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- for PR number: 1KW
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Surface: Coated
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle 脴 [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,955
- Number of mounting bores: 1
- for OE number: 8K0 615 601 C
- Observe service information
- old version
- Drilled: no
- Item number: 36454
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816364542
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
In stock
-64%
compared to
RRP 141,50 €
49,60 €
Price per item
price incl. 19% VAT
excl. delivery costs
REMSA 1343.10 Brake pad set Rear Axle, incl. wear warning contact
Article number: 1343.10
Submit a review
- for PR number: 1KY
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17,3
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Number of wear indicators [per axle]: 2
- Length [mm]: 116,4
- Height 1 [mm]: 60
- Height [mm]: 58,8
- Supplementary Article / Supplementary Info Info 2: with adhesive film, with bolts / screws
- Warning Contact Length [mm]: 295
- Item number: 1343.10
- Our price: 37,67 €
- Manufacturer: REMSA
- EAN number: 8427975032577
- Condition: New
Show OEM numbers of the product
Details
REMSA 1441.02 Brake pad set Front Axle, incl. wear warning contact
Article number: 1441.02
Reviews - 1
- for PR number: 1LL
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories, with spring
- Number of wear indicators [per axle]: 2
- Length [mm]: 193
- Height [mm]: 73,8
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Warning Contact Length [mm]: 295
- Item number: 1441.02
- Our price: 56,81 €
- Manufacturer: REMSA
- EAN number: 8427975032447
- Condition: New
Show OEM numbers of the product
Details
TRW COTEC GDB1883 Brake pad set Front Axle, incl. wear warning contact
Article number: GDB1883
Reviews - 2
-
- Fitting Position: Front Axle
- for PR number: 1LL
- for brake disc diameter [mm]: 356
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20
- Product line: COTEC
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 73,8
- Height 2 [mm]: 70,8
- Width [mm]: 193
- Test Mark: E9 90R - 01107 / 2923
- Manufacturer Restriction: ATE
- Warning Contact Length [mm]: 295
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Observe technical data
- Item number: GDB1883
- Our price: 66,04 €
- Manufacturer: TRW
- EAN number: 3322938075064
- Condition: New
Show OEM numbers of the product
Details
TRW COTEC GDB1884 Brake pad set Front Axle, incl. wear warning contact
Article number: GDB1884
Reviews - 1
-
- Fitting Position: Front Axle
- for PR number: 1LJ
- for brake disc diameter [mm]: 380
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20
- Product line: COTEC
- Number of wear indicators [per axle]: 2
- Height [mm]: 76,4
- Width [mm]: 193
- Test Mark: E9 90R - 01107 / 2925
- Manufacturer Restriction: ATE
- Warning Contact Length [mm]: 295
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Observe technical data
- Item number: GDB1884
- Our price: 74,11 €
- Manufacturer: TRW
- EAN number: 3322938075071
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 4)
-74%
compared to
RRP 292,79 €
74,11 €
price incl. 19% VAT
excl. delivery costs
TRW GDB1911 Brake pad set Front Axle, prepared for wear warning indicator
Article number: GDB1911
Submit a review
-
- Fitting Position: Front Axle
- for PR number: 1LN
- Special Purpose Vehicle: not for armoured vehicles
- for brake disc diameter [mm]: 400
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16,6
- Height [mm]: 93
- Width [mm]: 188,7
- Test Mark: E9 90R - 01107 / 3106
- Manufacturer Restriction: BREMBO
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Observe technical data
- Item number: GDB1911
- Our price: 65,74 €
- Manufacturer: TRW
- EAN number: 3322938100711
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
-72%
compared to
RRP 242,50 €
65,74 €
price incl. 19% VAT
excl. delivery costs
333体育直播免费在线平台 the best offers on