VW Jetta 2 1.6 Control unit, glow plug system (70 hp Petrol PN)
- Construction Year from: 08 / 1989
- Rated Voltage [V]: 12
- Current Strength [A]: 40
- Number of pins: 5
- Item number: 102 930
- Our price: 5,99 €
- Manufacturer: TOPRAN
- EAN number: 9062120000019
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Current Strength [A]: 40
- Relay function: Terminal 30, Clamp 87
- Rated current [A]: 40
- Weight [kg]: 0,04
- Product line: Q+, original equipment manufacturer quality MADE IN GERMANY
- Packaging width [cm]: 2,585
- Packaging height [cm]: 3,964
- Packaging Depth [cm]: 2,585
- Item number: V15-71-0005
- Our price: 14,94 €
- Manufacturer: VEMO
- EAN number: 4046001270338
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: CLASSIC
- Number of connectors: 4
- Current Strength [A]: 40
- Rated Voltage [V]: 12
- Item number: 1199205800
- Our price: 5,12 €
- Manufacturer: JP GROUP
- EAN number: 5710412121525
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Engine Compartment
- Packaging height [cm]: 3,9
- Packaging Depth [cm]: 2,7
- Product line: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V15-71-0003
- Our price: 7,88 €
- Manufacturer: VEMO
- EAN number: 4046001270314
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Item number: 309110261443
- Our price: 12,72 €
- Manufacturer: AUTOMEGA
- EAN number: 4053184060823
- Condition: New
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Fitting Position: Front Axle
- Height [mm]: 35,1
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 10
- Test Mark: E1 90R-02C0100 / 1552
- Drilled: no
- Item number: BG2116
- Manufacturer: DELPHI
- EAN number: 5012759421154
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: solid
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 12,0
- Fitting Position: Front Axle
- Height [mm]: 35,4
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 124,5
- MAPP code available
- Test Mark: E1 90R-02C0859 / 1218
- Bore Diameter [mm]: 13,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0312-0106.1
- Manufacturer: ATE
- EAN number: 4006633289276
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas-Girling
- Thickness [mm]: 14,3
- Fitting Position: Rear Axle
- Material: Low-Metallic
- Height [mm]: 52,8
- Width [mm]: 87,1
- WVA Number: 20961
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Article number of recommended accessories: 1987474197, 1987474253, 1987474721, 1987474304, 1987474278
- Observe technical data
- Item number: 0 986 466 683
- Our price: 53,34 €
- Manufacturer: BOSCH
- EAN number: 3165143661604
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 239
- for brake disc thickness [mm]: 20
- Quantity Unit: Axle Set
- Thickness [mm]: 14,7
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with spring
- Height 1 [mm]: 48,8
- Height 2 [mm]: 51,2
- Width [mm]: 137,8
- WVA Number: 20887
- Test Mark: ECE-R90
- Manufacturer Restriction: Kelsey-Hayes System
- Article number of recommended accessories: 1987474137, 1987474042
- Observe technical data
- Item number: 0 986 468 871
- Our price: 16,35 €
- Manufacturer: BOSCH
- EAN number: 3165143662892
- Condition: New
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 239
- for brake disc thickness [mm]: 12
- Quantity Unit: Axle Set
- Thickness [mm]: 19,2
- Material: Low-Metallic
- Height [mm]: 48,3
- Height 2 [mm]: 50,2
- Width [mm]: 137,8
- WVA Number: 20887
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual
- Manufacturer Restriction: Kelsey-Hayes System
- Article number of recommended accessories: 1987474042, 1987474175, 1987474137
- Observe technical data
- Number of springs: 4
- Item number: 0 986 468 873
- Our price: 17,45 €
- Manufacturer: BOSCH
- EAN number: 3165143662588
- Condition: New
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Front Axle
- Height [mm]: 38,7
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,7
- Drilled: no
- Item number: 0 986 478 010
- Manufacturer: BOSCH
- EAN number: 3165141023336
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Fitting Position: Front Axle
- Height [mm]: 35,2
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,8
- Drilled: no
- Item number: 0 986 478 011
- Manufacturer: BOSCH
- EAN number: 3165141023329
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 38,6
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,6
- Drilled: no
- Item number: 0 986 478 017
- Manufacturer: BOSCH
- EAN number: 3165141023466
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 226
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,9
- Fitting Position: Rear Axle
- Height [mm]: 71,5
- Surface: Oiled
- Centering Diameter [mm]: 39,85
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: 0 986 478 331
- Manufacturer: BOSCH
- EAN number: 3165141974348
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 12
- Fitting Position: Front Axle
- Height [mm]: 35
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Weight [kg]: 6,92
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 8
- Drilled: no
- Item number: DDF103
- Manufacturer: FERODO
- EAN number: 5016687110395
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake System: ATE
- Brake Disc Thickness [mm]: 12
- Fitting Position: Front Axle
- Height [mm]: 35
- Number of Holes: 4
- Minimum thickness [mm]: 10
- for article number: V2051P
- Drilled: no
- Item number: V2051P
- Manufacturer: LPR
- EAN number: 8032532076248
- Condition: New
price incl. 19% VAT
- Quantity Unit: Axle Set
- Brake System: Volkswagen
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,7
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 48,9
- Height 2 [mm]: 51,5
- Width [mm]: 137,8
- Test Mark: E9 90R-02A1251 / 4447
- MAPP code available
- Item number: 13.0460-7032.2
- Our price: 20,03 €
- Manufacturer: ATE
- EAN number: 4006633210904
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12,0
- Fitting Position: Front Axle
- Height [mm]: 35,4
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 124,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1151
- Bore Diameter [mm]: 13,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0112-0106.1
- Manufacturer: ATE
- EAN number: 4006633055796
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 239
- for brake disc thickness [mm]: 10
- Quantity Unit: Axle Set
- Thickness [mm]: 17,2
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with spring
- Height [mm]: 51,2
- Width [mm]: 137,8
- WVA Number: 20889
- Test Mark: ECE-R90
- Manufacturer Restriction: Kelsey-Hayes System
- Article number of recommended accessories: 1987474137, 1987474003
- Observe technical data
- Number of springs: 4
- Item number: 0 986 468 890
- Our price: 15,11 €
- Manufacturer: BOSCH
- EAN number: 3165143662595
- Condition: New
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 38,7
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 18
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,6
- Drilled: no
- Item number: 0 986 478 308
- Manufacturer: BOSCH
- EAN number: 3165141234893
- Condition: New
price incl. 19% VAT
excl. delivery costs