Vehicle identification number: 0603630
VW Beetle 9c 2.3 V5 Control unit, glow plug system (170 hp Petrol AQN)
- Rated Voltage [V]: 12
- Relay function: Pre-glow device
- Item number: 99110119801
- Our price: 8,69 €
- Manufacturer: VIKA
- EAN number: 2243469911011
- Condition: New
- Supplementary Info: Original VEMO Quality
- Voltage [V]: 12
- Colour: black
- Number of pins: 4
- Number of connectors: 4
- Rated Voltage [V]: 12
- Relay function: Clamp 87, Terminal 30, Normally open contact
- Supplementary Article / Supplementary Info Info 2: with resistor
- Housing Colour: black
- Rated current [A]: 70
- Fitting Position: Engine Compartment
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Item number: V30-71-0041
- Our price: 14,65 €
- Manufacturer: VEMO
- EAN number: 4046001880759
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Current Strength [A]: 40
- Relay function: Terminal 30, Clamp 87
- Rated current [A]: 40
- Weight [kg]: 0,04
- Product line: Q+, original equipment manufacturer quality MADE IN GERMANY
- Packaging width [cm]: 2,585
- Packaging height [cm]: 3,964
- Packaging Depth [cm]: 2,585
- Item number: V15-71-0005
- Our price: 14,04 €
- Manufacturer: VEMO
- EAN number: 4046001270338
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Item number: 309110253357
- Our price: 4,78 €
- Manufacturer: AUTOMEGA
- EAN number: 4053184060809
- Condition: New
-
- Fitting Position: Front Axle
- Rim Size [inch]: 17
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34,2
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0957 / 2581
- Drilled: no
- Item number: BG3528
- Manufacturer: DELPHI
- EAN number: 5012759140611
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Fitting Position: Front Axle
- Height [mm]: 74,0
- Width [mm]: 156,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 19,8
- Production Number: 6000375
- Item number: 6000375
- Our price: 27,84 €
- Manufacturer: KRAFT
- EAN number: 5900427187191
- Condition: New
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 37
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: BDC4764
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593866157
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 34,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: BDC4768
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593866171
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2005
- for PR number: 1KY
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,6
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 135,0
- Bore Diameter [mm]: 15,8
- Drilled: no
- Item number: BAR22163
- Manufacturer: Barum
- EAN number: 4006633331265
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2005
- for PR number: 1KY
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 16
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0220
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0516.2
- Number of bolts / screws: 4
- Item number: 13.0460-2886.2
- Our price: 23,77 €
- Manufacturer: ATE
- EAN number: 4006633201421
- Condition: New
-
- Construction Year to: 05 / 2005
- for PR number: 1KS, 1KV
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 24,70 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
-
- Construction Year to: 05 / 2005
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,8
- Number of wear indicators [per axle]: 1
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1259 / 1629
- Warning Contact Length [mm]: 145
- MAPP code available
- Spring Clip Diameter [mm]: 43
- Item number: 13.0460-7122.2
- Our price: 49,58 €
- Manufacturer: ATE
- EAN number: 4006633058230
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KY
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0091 / 1610
- Drilled: no
- Item number: BG3611
- Manufacturer: DELPHI
- EAN number: 5012759159798
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2002
- Fitting Position: Front Axle
- Rim Size [inch]: 16.0
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake System: TRW
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34,2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Drilled: no
- Item number: A1451V
- Manufacturer: LPR
- EAN number: 8032532068670
- Condition: New
-
- Construction Year to: 12 / 2005
- Fitting Position: Front Axle
- Rim Size [inch]: 17.0
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Brake System: BREMBO
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34
- Centering Diameter [mm]: 65
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: A1598V
- Manufacturer: LPR
- EAN number: 8032532068793
- Condition: New
price incl. 19% VAT
-
- Construction Year to: 05 / 2005
- Fitting Position: Rear Axle
- Rim Size [inch]: 17.0
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: A1602V
- Manufacturer: LPR
- EAN number: 8032532068830
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Fitting Position: Rear Axle
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 17,2
- Production Number: 6010092
- Item number: 6010092
- Our price: 18,08 €
- Manufacturer: KRAFT
- EAN number: 5900427194281
- Condition: New
- Diameter [mm]: 232
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Fitting Position: Rear Axle
- Height [mm]: 39,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 7
- Drilled: no
- Item number: BDC4753
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583863
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2005
- for PR number: 1KY
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 15,2
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0220, E9 90R-02A1163 / 1123
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0419.2, 13.0460-0516.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2937.2
- Our price: 19,83 €
- Manufacturer: ATE
- EAN number: 4006633092982
- Condition: New
-
- Construction Year to: 05 / 2005
- for PR number: 1KY
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 16
- Product line: Ceramic
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2886.2
- Our price: 35,86 €
- Manufacturer: ATE
- EAN number: 4006633339568
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.