VW Phaeton 3d 6.0 W12 4motion Control unit, glow plug system (420 hp Petrol BAN)
- TecDoc Engine Number: BAN
- Current Strength [A]: 40
- Relay function: Terminal 30, Clamp 87
- Rated current [A]: 40
- Weight [kg]: 0,04
- Product line: Q+, original equipment manufacturer quality MADE IN GERMANY
- Packaging width [cm]: 2,585
- Packaging height [cm]: 3,964
- Packaging Depth [cm]: 2,585
- Item number: V15-71-0005
- Our price: 14,94 €
- Manufacturer: VEMO
- EAN number: 4046001270338
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Item number: B17806
- Our price: 6,57 €
- Manufacturer: Borsehung
- EAN number: 4251475104564
- Condition: New
- Relay function: Pre-glow device, X contact relief
- Rated Voltage [V]: 12
- Number of connectors: 4
- Current Strength [A]: 70
- Relay Number: 644
- Item number: B17820
- Our price: 6,62 €
- Manufacturer: Borsehung
- EAN number: 224815107061851070618
- Condition: New
- Item number: B17803
- Our price: 6,77 €
- Manufacturer: Borsehung
- EAN number: 224815107061681070616
- Condition: New
- Relay function: Pre-glow device, X contact relief
- Rated Voltage [V]: 12
- Number of connectors: 4
- Current Strength [A]: 70
- Relay Number: 644
- Item number: B17818
- Our price: 10,10 €
- Manufacturer: Borsehung
- EAN number: 4251475104663
- Condition: New
- Diameter [mm]: 335
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 15,9
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 33,5
- Packaging width [cm]: 33,5
- Packaging height [cm]: 8,8
- Drilled: no
- Item number: DDF1935C
- Manufacturer: FERODO
- EAN number: 4044197564521
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Construction Year from: 06 / 2003
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 46,3
- Surface: Oiled
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG3198
- Manufacturer: DELPHI
- EAN number: 5012759064368
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2005
- Fitting Position: Front Axle
- for PR number: 1ZK, 1ZL
- Diameter [mm]: 360
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 34
- Height [mm]: 59,4
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 31
- Drilled: no
- Item number: A1032V
- Manufacturer: LPR
- EAN number: 8032928084567
- Condition: New
price incl. 19% VAT
-
- for PR number: 1LC
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17
- Number of wear indicators [per axle]: 2
- Height [mm]: 73,9
- Width [mm]: 97,3
- Number of pads: 8
- Test Mark: E1 90R-01937 / 791
- Warning Contact Length [mm]: 240
- MAPP code available
- Item number: 13.0460-4800.2
- Our price: 107,03 €
- Manufacturer: ATE
- EAN number: 4006633219181
- Condition: New
-
- for PR number: 1KY
- Fitting Position: Rear Axle
- Diameter [mm]: 335,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 191,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0747
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0214.1
- Manufacturer: ATE
- EAN number: 4006633221467
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZK, 1ZL
- Fitting Position: Front Axle
- Diameter [mm]: 360,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 34,0
- Height [mm]: 59,7
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 31,0
- Inner Diameter [mm]: 135,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0865
- Bore Diameter [mm]: 15,0
- Drilled: no
- Item number: 24.0134-0100.1
- Manufacturer: ATE
- EAN number: 4006633230292
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- for PR number: 1KP
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Weight [kg]: 14,1
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 31
- Packaging width [cm]: 31
- Packaging height [cm]: 10
- Drilled: no
- Item number: DDF1934C
- Manufacturer: FERODO
- EAN number: 4044197564514
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) to: 3D-3-004275
- for PR number: 1LX
- Diameter [mm]: 323
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 29,9
- Fitting Position: Front Axle
- Height [mm]: 59,5
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 28
- Inner Diameter [mm]: 142,8
- Machining: High-carbon
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3A025ABE
- Manufacturer: ABE
- EAN number: 5900427198623
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 34
- Fitting Position: Front Axle
- Height [mm]: 59,6
- Centering Diameter [mm]: 38
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 31
- Thread Size: 15,5
- Drilled: no
- Item number: C3W041ABE
- Manufacturer: ABE
- EAN number: 5900427201958
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- for PR number: 1ZL
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 34
- Height [mm]: 59,6
- Surface: Oiled
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 31
- Machining: High-carbon
- Test Mark: E1 90R-02C0074 / 1663
- Drilled: no
- Item number: BG9957
- Manufacturer: DELPHI
- EAN number: 5012759360750
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: BAN
- Construction Year to: 05 / 2005
- Fitting Position: Rear Axle
- for PR number: 1KY, 2EA
- Diameter [mm]: 335
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,2
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 591
- Manufacturer: BOSCH
- EAN number: 4047024685758
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KD, 1KP, 1KY
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17,4
- Height [mm]: 59,0
- Width [mm]: 116,1
- Test Mark: E1 90R-02A0498 / 0489
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Warning Contact Length [mm]: 640
- MAPP code available
- Article number of recommended accessories: 13.0460-0023.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2890.2
- Our price: 64,43 €
- Manufacturer: ATE
- EAN number: 4006633201544
- Condition: New
-
- for PR number: 1ZK, 1ZL
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20,6
- Number of wear indicators [per axle]: 2
- Height [mm]: 72,6
- Width [mm]: 193,0
- Test Mark: E1 90R-01517 / 651
- Warning Contact Length [mm]: 260
- MAPP code available
- Item number: 13.0460-7182.2
- Our price: 105,41 €
- Manufacturer: ATE
- EAN number: 4006633117999
- Condition: New
-
- for PR number: 1KD
- Fitting Position: Rear Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 158,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0481
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0202.1
- Manufacturer: ATE
- EAN number: 4006633209380
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KP
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 178,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0848
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0212.1
- Manufacturer: ATE
- EAN number: 4006633209397
- Condition: New
price incl. 19% VAT
excl. delivery costs