Astra G T98 2.0 Intake air control valve (199 hp Petrol Z 20 LET)
- Valve type: Switch Valve
- Operating Mode: Electric
- Voltage [V]: 12
- Item number: 3553P0081
- Our price: 27,76 €
- Manufacturer: RIDEX
- EAN number: 4066016935596
- Condition: New
price incl. 19% VAT
excl. delivery costs

- Valve type: Switch Valve
- Operating Mode: Electric
- Voltage [V]: 12
- Item number: 58-0451
- Our price: 27,80 €
- Manufacturer: MAXGEAR
- EAN number: 5905141998740
- Condition: New
- Valve type: Switch Valve
- Operating Mode: Electric
- Voltage [V]: 12
- Technical Information Number: SI 0096
- Item number: 7.01039.03.0
- Our price: 28,60 €
- Manufacturer: PIERBURG
- EAN number: 4028977720895
- Condition: New
- TecDoc Engine Number: Z 20 LET
- Voltage [V]: 12
- Operating Mode: Electric
- Valve type: Switch Valve
- Number of pins: 2
- Weight [kg]: 0,07
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Packaging width [cm]: 4,9
- Packaging height [cm]: 9,2
- Packaging Depth [cm]: 9
- Item number: V40-63-0033
- Our price: 22,41 €
- Manufacturer: VEMO
- EAN number: 4046001579837
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E4 90R-02C0747 / 2816
- Drilled: no
- Item number: BG3406
- Manufacturer: DELPHI
- EAN number: 5012759086513
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0333 / 0253, E9 90R-02A1163 / 1231
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2868.2
- Our price: 29,90 €
- Manufacturer: ATE
- EAN number: 4006633104135
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Fitting Position: Front Axle
- Height 1 [mm]: 74,0
- Height 2 [mm]: 74,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,3
- Thickness 2 [mm]: 19,6
- Test Mark: E1 90R-01651 / 594
- MAPP code available
- Article number of recommended accessories: 24.8190-0018.2, 24.8190-0718.2
- Observe dimensions
- Item number: 13.0460-7173.2
- Our price: 36,86 €
- Manufacturer: ATE
- EAN number: 4006633105118
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Product line: Ceramic
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0258 / 0226
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2868.2
- Our price: 42,04 €
- Manufacturer: ATE
- EAN number: 4006633346429
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Diameter [mm]: 308,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Fitting Position: Front Axle
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 23,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 8
- Test Mark: E1 90R-02C0858 / 1214
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0142.1
- Manufacturer: ATE
- EAN number: 4006633312653
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Material: Low-Metallic
- Height 1 [mm]: 71,6
- Height 2 [mm]: 78,5
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 19,3
- Thickness 2 [mm]: 20,1
- WVA Number: 23057
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Article number of recommended accessories: 1987473018, 1987473033, 1987474973, 1987474587, 1987474241
- Observe technical data
- Item number: 0 986 424 457
- Our price: 21,03 €
- Manufacturer: BOSCH
- EAN number: 3165143210031
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with integrated wear sensor, with acoustic wear warning
- Fitting Position: Front Axle
- Material: Low-Metallic
- Height [mm]: 74,2
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,4
- Thickness 1 [mm]: 19,5
- Thickness 2 [mm]: 20,3
- WVA Number: 23116
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with piston clip
- Article number of recommended accessories: 1987473018, 1987474973, 1987474587, 1987474241
- Observe technical data
- Item number: 0 986 424 488
- Our price: 27,05 €
- Manufacturer: BOSCH
- EAN number: 3165143660478
- Condition: New
- Diameter [mm]: 263,8
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,2
- Drilled: no
- Item number: 0 986 478 884
- Manufacturer: BOSCH
- EAN number: 3165143118153
- Condition: New
-
- Fitting Position: Rear Axle
- Manufacturer Restriction: Bosch
- Quantity Unit: Axle Set
- Brake System: Bosch
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,9
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,7
- Width [mm]: 104,9
- WVA Number: 23258
- Weight [kg]: 0,85
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2325803
- Our price: 29,35 €
- Manufacturer: TEXTAR
- EAN number: 4019722220579
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: 42000001, 45000001, 46000001, 4B000001, 4G000001
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Height 1 [mm]: 76
- Height 2 [mm]: 69,6
- Width 2 [mm]: 155,1
- Width 1 [mm]: 156,5
- Thickness 1 [mm]: 19,6
- Thickness 2 [mm]: 20,6
- WVA Number: 23832
- Weight [kg]: 2
- Article number of recommended accessories: 82032000
- directional
- Observe mounting information
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2383201
- Our price: 28,43 €
- Manufacturer: TEXTAR
- EAN number: 4019722259593
- Condition: New
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 20,3
- Fitting Position: Front Axle
- Number of wear indicators [per axle]: 2
- Height [mm]: 74
- Width [mm]: 155
- Warning Contact Length [mm]: 11
- Item number: BP1023
- Our price: 57,80 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593658592
- Condition: New
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 43
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4816
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604902
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Bosch
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,5
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,7
- Width [mm]: 104,6
- Test Mark: E1 90R-01326 / 452
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-3976.2
- Our price: 27,60 €
- Manufacturer: ATE
- EAN number: 4006633057660
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Diameter [mm]: 264,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,8
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0694
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0250.1
- Manufacturer: ATE
- EAN number: 4006633029681
- Condition: New
- Diameter [mm]: 308,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Fitting Position: Front Axle
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 8
- Test Mark: E1 90R-02C0118 / 1163
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0142.1
- Manufacturer: ATE
- EAN number: 4006633109857
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 308
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 42,1
- Surface: Coated
- Centering Diameter [mm]: 70
- Number of Holes: 7
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,2
- Drilled: no
- Item number: 0 986 479 113
- Manufacturer: BOSCH
- EAN number: 4047024235427
- Condition: New