Passat 3a5 1.8 G60 Syncro Drum brake (160 hp Petrol PG)
Recommended part replacement interval for your car for the part category Drum brake: every 60.000 km
- Fitting Position: Rear Axle, Rear Axle both sides
- Material: Cast Iron
- Bore Diameter [mm]: 20,64
- Thread Size: 1x M10x1.0
- Distance of mounting bores [mm]: 21
- Item number: 277W0010
- Manufacturer: RIDEX
- EAN number: 4059191360086
- Condition: New
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Item number: 120018210
- Manufacturer: AUTOMEGA
- EAN number: 2232389004130
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Drum diameter [mm]: 200,0
- Outer brake drum diameter [mm]: 240
- Inner brake drum height [mm]: 50,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 81
- max. brake drum reboring dimension [mm]: 201,5
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without wheel bearing
- Weight [kg]: 8,57
- Support plate diameter [mm]: 50,3
- Thread Size: M 12x1,5
- Inner Diameter 2 [mm]: 39,9
- Packaging width [cm]: 28
- Packaging height [cm]: 8
- Packaging Depth [cm]: 28
- Item number: V10-60008
- Manufacturer: VAICO
- EAN number: 4046001377754
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 8,7
- Thickness [mm]: 40
- for OE number: 1H0 501 615 A
- Item number: 14060
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816140603
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 8,7
- Thickness [mm]: 40
- Item number: 30 91 4060
- Manufacturer: SWAG
- EAN number: 4044688524898
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for article number: LY1206
- Width [mm]: 40
- Brake System: V.A.G.
- Inner brake drum diameter [mm]: 230
- Item number: LS1655
- Our price: 22,52 €
- Manufacturer: DELPHI
- EAN number: 5012759205648
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Width [mm]: 40
- Brake Pad: with lining
- Item number: C0W010ABE
- Our price: 25,14 €
- Manufacturer: ABE
- EAN number: 5900427184145
- Condition: New
- Fitting Position: Rear Axle
- Material: Cast Iron
- Brake System: FTE
- Thread Size: 10 X 1
- Distance of mounting bores [mm]: 21
- Piston Diameter [mm]: 20,64
- Item number: 4299
- Manufacturer: LPR
- EAN number: 5900427267299
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Material: Aluminium
- Brake System: FTE
- Thread Size: 10 X 1
- Distance of mounting bores [mm]: 10,5
- Piston Diameter [mm]: 20,64
- Item number: 4374
- Manufacturer: LPR
- EAN number: 8032532013120
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Diameter [mm]: 20,64
- Material: Cast Iron
- Bore Diameter [mm]: 20,64
- Brake System: ATE, FTE
- Item number: C5W009ABE
- Manufacturer: ABE
- EAN number: 5900427212817
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Diameter [mm]: 20,6
- Cylinder Piston Diameter [mm]: 20,6
- Material: Cast Iron
- Brake System: ATE, FTE
- Item number: C5W004ABE
- Manufacturer: ABE
- EAN number: 5900427212749
- Condition: New
- Fitting Position: Rear Axle
- Material: Cast Iron
- Brake System: FTE
- Distance of mounting bores [mm]: 21
- Piston Diameter [mm]: 20,64
- Item number: C16931
- Manufacturer: SAMKO
- EAN number: 2234315869956
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Material: Aluminium
- Piston Diameter [mm]: 20,64
- Item number: 2283
- Manufacturer: MAPCO
- EAN number: 4043605031068
- Condition: New
- Fitting Position: Rear Axle
- Material: Cast Iron
- Bore Diameter [mm]: 20,64
- Brake System: FTE
- Thread Size: 10 x 1
- Distance of mounting bores [mm]: 21
- Item number: A 12 217
- Manufacturer: BREMBO
- EAN number: 8432509601440
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
- Material: Cast Iron
- Piston Diameter [mm]: 20,64
- Item number: 2783
- Manufacturer: MAPCO
- EAN number: 4043605038166
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Material: Cast Iron
- Manufacturer Restriction: FTE
- Piston Diameter [mm]: 20,6
- Item number: BWF145
- Manufacturer: TRW
- EAN number: 3322937017911
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Material: Aluminium
- Manufacturer Restriction: FTE
- Observe technical data
- Piston Diameter [mm]: 20,6
- Item number: BWF145A
- Manufacturer: TRW
- EAN number: 3322937292691
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Material: Aluminium
- Bore Diameter [mm]: 20,64
- Brake System: FTE
- Thread Size: 10 x 1
- Distance of mounting bores [mm]: 10,5
- Item number: A 12 244
- Manufacturer: BREMBO
- EAN number: 8432509601686
- Condition: New
-
- Construction Year from: 09 / 1989
- Construction Year to: 07 / 1993
- Fitting Position: Rear Axle
- Material: Aluminium
- Brake System: FTE
- Thread Size: 10 X 1
- Distance of mounting bores [mm]: 10,5
- Item number: C23620
- Manufacturer: SAMKO
- EAN number: 2234315870116
- Condition: New
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Info: CIFAM
- Material: Aluminium
- Piston Diameter [mm]: 20,6
- Item number: 101-594
- Manufacturer: METZGER
- EAN number: 8032747005248
- Condition: New
- 1
- 2