Hyundai Lantra J1 1.8 i.e. 16V Distributor cap (127 hp Petrol G4CN)
- Weight [kg]: 0,121
- Item number: 692D0068
- Our price: 6,10 €
- Manufacturer: RIDEX
- EAN number: 4064138581158
- Condition: New
- Weight [kg]: 0,121
- for OE number: MD607597
- Item number: ADC41423
- Our price: 6,64 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063414233
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of Cylinders: 4
- Weight [kg]: 0,10213
- Packaging height [cm]: 11,6
- Item number: A37-70-0025
- Our price: 10,71 €
- Manufacturer: ACKOJA
- EAN number: 4062375087426
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Item number: 10E5007-OYO
- Our price: 6,20 €
- Manufacturer: Oyodo
- EAN number: 226984177658441776584
- Condition: New
- Distributor / Rotor: Waterproof, no interference suppression
- Mounting Type: Clipped
- Number of inlets / outlets: 5
- Item number: J5325003
- Our price: 11,02 €
- Manufacturer: NIPPARTS
- EAN number: 22100862928571292857
- Condition: New
-
- Construction Year from: 01 / 1991
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 40,3
- Centering Diameter [mm]: 76
- Number of Holes: 4
- Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: C40501ABE
- Manufacturer: ABE
- EAN number: 5900427202887
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Construction Year from: 01 / 1992
- Brake Disc Thickness [mm]: 22
- Height [mm]: 34
- Material: Grey Cast Iron
- Centering Diameter [mm]: 86
- Number of Holes: 4
- Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: C30502ABE
- Manufacturer: ABE
- EAN number: 5900744121649
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Construction Year from: 09 / 1991
- Brake System: Sumitomo
- for model code: Elantra
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 34
- Surface: Oiled
- Centering Diameter [mm]: 86
- Number of Holes: 4
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0074 / 0061
- Drilled: no
- Item number: BG2628
- Manufacturer: DELPHI
- EAN number: 5012759426098
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Construction Year from: 05 / 1995
- for model code: Lantra
- Diameter [mm]: 258
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 40,4
- Surface: Oiled
- Centering Diameter [mm]: 76
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0100 / 1604
- Drilled: no
- Item number: BG3070
- Manufacturer: DELPHI
- EAN number: 5012759063088
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 1990
- Construction Year to: 04 / 1995
- Fitting Position: Front Axle
- Diameter [mm]: 257,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 34
- Surface: Coated
- Centering Diameter [mm]: 86,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 104,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 160,5
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0189
- Bore Diameter [mm]: 10,6
- Drilled: no
- Item number: 24.0122-0170.1
- Manufacturer: ATE
- EAN number: 4006633007900
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 1990
- Construction Year to: 04 / 1995
- Fitting Position: Front Axle
- Diameter [mm]: 257,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 34
- Surface: Coated
- Centering Diameter [mm]: 86,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 104,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 160,5
- MAPP code available
- Bore Diameter [mm]: 10,6
- Drilled: no
- Item number: 24.0322-0170.1
- Manufacturer: ATE
- EAN number: 4006633120012
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1994
- Construction Year to: 06 / 1995
- Fitting Position: Rear Axle
- Brake System: MANDO
- Wear Warning Contact: with integrated wear sensor, with acoustic wear warning
- Thickness [mm]: 14
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 46,6
- Width [mm]: 85
- WVA Number: 21553, 21554, 21555, 25752
- Test Mark: ECE-R90
- Weight [kg]: 0,75
- Supplementary Article / Supplementary Info Info 2: without anti-squeak plate
- FMSI Code: D464-7344
- Item number: 598817
- Our price: 23,76 €
- Manufacturer: VALEO
- EAN number: 3276425988170
- Condition: New
1923-2023: 100 years of braking
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 22
- Height [mm]: 34
- Surface: Oiled
- Centering Diameter [mm]: 86
- Number of Holes: 4
- Minimum thickness [mm]: 20
- Weight [kg]: 10,62
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 6,9
- Drilled: no
- Item number: DDF482
- Manufacturer: FERODO
- EAN number: 5016687148299
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 40,3
- Surface: Oiled
- Centering Diameter [mm]: 76
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 8
- Weight [kg]: 7,42
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 25,5
- Packaging width [cm]: 25,5
- Packaging height [cm]: 8,5
- Drilled: no
- Item number: DDF1176
- Manufacturer: FERODO
- EAN number: 5016687310993
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 258
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 40,4
- Surface: Coated
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 154,3
- Hub Diameter [mm]: 76,3
- No. of holes 1: 2
- No. of holes 2: 2
- Drilled: no
- Item number: J3310508
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416052706
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 40
- Centering Diameter [mm]: 76
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4614
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593865709
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 1990
- Construction Year to: 04 / 1995
- Fitting Position: Front Axle
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,8
- Quantity Unit: Axle Set
- Height [mm]: 54,5
- Width [mm]: 137,0
- Test Mark: E9 90R-01229 / 048
- MAPP code available
- Item number: 13.0460-5933.2
- Our price: 36,48 €
- Manufacturer: ATE
- EAN number: 4006633021869
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: G4CN
- Construction Year from: 06 / 1992
- Construction Year to: 04 / 1995
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Material: Low-Metallic
- Thickness [mm]: 16,8
- Quantity Unit: Axle Set
- Height [mm]: 54,4
- Width [mm]: 137,3
- WVA Number: 21725
- Test Mark: ECE-R90
- Manufacturer Restriction: SUMITOMO System
- Article number of recommended accessories: 1987474326, 1987474327, 1987474405, 1987474404, 1987474361
- Observe technical data
- Item number: 0 986 424 215
- Our price: 23,01 €
- Manufacturer: BOSCH
- EAN number: 3165143661116
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Thickness [mm]: 14
- Quantity Unit: Axle Set
- Height [mm]: 46,4
- Width [mm]: 85,6
- WVA Number: 21553
- Weight [kg]: 0,75
- Technical Information Number: 21553 140 0 5
- Packaging length [cm]: 9,5
- Packaging width [cm]: 8,2
- Packaging height [cm]: 7,3
- Item number: 2155301
- Our price: 28,91 €
- Manufacturer: TEXTAR
- EAN number: 4019722202148
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Quantity Unit: Axle Set
- Height 1 [mm]: 54,2
- Height 2 [mm]: 54,2
- Width 2 [mm]: 137,2
- Width 1 [mm]: 137,2
- Thickness 1 [mm]: 17,5
- Thickness 2 [mm]: 17,5
- Item number: J3600517
- Our price: 45,68 €
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416056230
- Condition: New
quantity 1:Â 2 quantity 2:Â 2
price incl. 19% VAT