VW Phaeton 3d 4.2 V8 4motion Intermediate / balance shaft (335 hp Petrol BGH)
- Inner Diameter [mm]: 32
- Fitting Position: frontal sided
- for OE number: 068 103 085 E
- Diameter [mm]: 47
- Item number: 07.10.010
- Our price: 3,96 €
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081272661
- Condition: New
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Inner Diameter [mm]: 32
- Fitting Position: frontal sided
- Thickness [mm]: 10
- Required quantity: 4
- Weight [kg]: 0,023
- for OE number: 068 103 085 E
- Diameter [mm]: 47
- Packaging width [cm]: 4,7
- Packaging height [cm]: 1
- Packaging Depth [cm]: 4,7
- Item number: V10-3256
- Our price: 5,44 €
- Manufacturer: VAICO
- EAN number: 4046001639845
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Rear Axle
- for PR number: 1KP
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Weight [kg]: 14,1
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 31
- Packaging width [cm]: 31
- Packaging height [cm]: 10
- Drilled: no
- Item number: DDF1934C
- Manufacturer: FERODO
- EAN number: 4044197564514
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KY
- Diameter [mm]: 335
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 15,9
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 33,5
- Packaging width [cm]: 33,5
- Packaging height [cm]: 8,8
- Drilled: no
- Item number: DDF1935C
- Manufacturer: FERODO
- EAN number: 4044197564521
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 46,3
- Surface: Oiled
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG3198
- Manufacturer: DELPHI
- EAN number: 5012759064368
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZL
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 34
- Height [mm]: 59,6
- Surface: Oiled
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 31
- Machining: High-carbon
- Test Mark: E1 90R-02C0074 / 1663
- Drilled: no
- Item number: BG9957
- Manufacturer: DELPHI
- EAN number: 5012759360750
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KD, 1KP, 1KY
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17,4
- Height [mm]: 59,0
- Width [mm]: 116,1
- Test Mark: E1 90R-02A0498 / 0489
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Warning Contact Length [mm]: 640
- MAPP code available
- Article number of recommended accessories: 13.0460-0023.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2890.2
- Our price: 63,15 €
- Manufacturer: ATE
- EAN number: 4006633201544
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KD
- Fitting Position: Rear Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 158,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0481
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0202.1
- Manufacturer: ATE
- EAN number: 4006633209380
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KY
- Fitting Position: Rear Axle
- Diameter [mm]: 335,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 191,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0747
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0214.1
- Manufacturer: ATE
- EAN number: 4006633221467
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZK, 1ZL
- Fitting Position: Front Axle
- Diameter [mm]: 360,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 34,0
- Height [mm]: 59,7
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 31,0
- Inner Diameter [mm]: 135,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0865
- Bore Diameter [mm]: 15,0
- Drilled: no
- Item number: 24.0134-0100.1
- Manufacturer: ATE
- EAN number: 4006633230292
- Condition: New
price incl. 19% VAT
-
- for brake disc diameter [mm]: 360
- for PR number: 1ZK, 1ZL
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact
- Thickness [mm]: 20,3
- Fitting Position: Front Axle
- Number of wear indicators [per axle]: 2
- Height [mm]: 72,7
- Height 2 [mm]: 72,5
- Width [mm]: 193
- Width 2 [mm]: 193
- Thickness 2 [mm]: 20,3
- WVA Number: 23885, 23897
- Test Mark: ECE-R90
- Weight [kg]: 3,26
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Warning Contact Length [mm]: 240
- FMSI Code: D1024-7928, D1117-7928
- Item number: 598845
- Our price: 64,57 €
- Manufacturer: VALEO
- EAN number: 3276425988453
- Condition: New
1923-2023: 100 years of braking
-
- Fitting Position: Rear Axle
- for PR number: 1KP
- Diameter [mm]: 310
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,1
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 062
- Manufacturer: BOSCH
- EAN number: 3165143963265
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) to: 3D-3-004275
- for PR number: 1LX
- Diameter [mm]: 323
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 29,9
- Fitting Position: Front Axle
- Height [mm]: 59,5
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 10
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 28
- Inner Diameter [mm]: 142,8
- Machining: High-carbon
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3A025ABE
- Manufacturer: ABE
- EAN number: 5900427198623
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 360
- Brake Disc Type: Vented
- for PR number: 1ZL / 1ZK
- Brake Disc Thickness [mm]: 34
- Fitting Position: Front Axle
- Height [mm]: 59,6
- Centering Diameter [mm]: 38
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 31
- Thread Size: 15,5
- Drilled: no
- Item number: C3W041ABE
- Manufacturer: ABE
- EAN number: 5900427201958
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- for PR number: 1ZK, 1ZL
- Diameter [mm]: 360
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 34
- Height [mm]: 59,4
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 31
- Drilled: no
- Item number: A1032V
- Manufacturer: LPR
- EAN number: 8032928084567
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- for PR number: 1KY, 2EA
- Diameter [mm]: 335
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,2
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 591
- Manufacturer: BOSCH
- EAN number: 4047024685758
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 34
- Fitting Position: Front Axle
- Height [mm]: 59,6
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 31
- Drilled: no
- Item number: BDC5688
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159653
- Condition: New
price incl. 19% VAT
-
- for PR number: 1LC
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 17
- Number of wear indicators [per axle]: 2
- Height [mm]: 73,9
- Width [mm]: 97,3
- Number of pads: 8
- Test Mark: E1 90R-01937 / 791
- Warning Contact Length [mm]: 240
- MAPP code available
- Item number: 13.0460-4800.2
- Our price: 101,98 €
- Manufacturer: ATE
- EAN number: 4006633219181
- Condition: New
-
- for PR number: 1ZK, 1ZL
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20,6
- Number of wear indicators [per axle]: 2
- Height [mm]: 72,6
- Width [mm]: 193,0
- Test Mark: E1 90R-01517 / 651
- Warning Contact Length [mm]: 260
- MAPP code available
- Item number: 13.0460-7182.2
- Our price: 104,99 €
- Manufacturer: ATE
- EAN number: 4006633117999
- Condition: New
-
- for PR number: 1KP
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 42,4
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 178,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0848
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0212.1
- Manufacturer: ATE
- EAN number: 4006633209397
- Condition: New
price incl. 19% VAT
excl. delivery costs