Mercedes S203 C 280 3.0 4-matic Lambda sensor (231 hp Petrol M 272.941)
Recommended part replacement interval for your car for the part category Lambda sensor: every 100.000 km
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 275
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: SKLS-0140013
- Our price: 47,78 €
- Manufacturer: STARK
- EAN number: 4059191043101
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Right Front, after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 380
- Item number: ES20313-12B1
- Our price: 49,22 €
- Manufacturer: DELPHI
- EAN number: 5012759388662
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Engine Code: M272.940
- Construction Year from: 06 / 2005
- Transmission Type: Automatic Transmission
- Fitting Position: Left, after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Product line: Original Quality
- Thread Size: M18x1,5
- Oxygen Sensor: Thread pre-greased
- Cable Length [mm]: 650
- Length [mm]: 650
- Number of circuits: 4
- Conductor Number: 4
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Packaging height [cm]: 9,2
- Item number: V30-76-0026
- Our price: 50,98 €
- Manufacturer: VEMO
- EAN number: 4046001314537
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Oxygen Sensor
- Number of circuits: 4
- Weight [kg]: 0,09
- Voltage [V]: 12
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Item number: 09SKV909
- Our price: 51,50 €
- Manufacturer: ESEN SKV
- EAN number: 2249698728848
- Condition: New
-
- Fitting Position: Right
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 400
- Number of circuits: 4
- Weight [kg]: 0,082
- Spanner Size: 22
- External Thread Size: M18x1,5
- Item number: 175932
- Our price: 51,90 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224759325
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Left, Right
- Transmission Type: Automatic Transmission
- Product line: Universal fit
- Thread Size: M18x1,5, M18x1.5
- Oxygen Sensor: Heated, Planar probe, Oxygen Sensor
- Cable Length [mm]: 750
- Number of pins: 4
- Quality: OE
- Weight [g]: 93
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 140
- Item number: DOX-0150
- Our price: 52,17 €
- Manufacturer: DENSO
- EAN number: 8717613029701
- Condition: New
For Pump Type: HP3
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 785
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: SKLS-0140751
- Our price: 52,71 €
- Manufacturer: STARK
- EAN number: 4064138676229
- Condition: New
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 520
- Number of pins: 4
- Number of circuits: 4
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Plug housing design: Plug sleeve housing
- Item number: SKLS-0140095
- Our price: 52,86 €
- Manufacturer: STARK
- EAN number: 4059191047994
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 900
- Number of pins: 4
- Voltage [V]: 12
- Item number: 70785
- Our price: 54,29 €
- Manufacturer: AIC
- EAN number: 4046283707850
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
- Transmission Type: Automatic Transmission
- Catalytic Converter Type: with three-way catalytic converter
- Fitting Position: after catalytic converter, Left Front
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 919
- Item number: ES20174-12B1
- Our price: 54,46 €
- Manufacturer: DELPHI
- EAN number: 5012759500385
- Condition: New
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 410
- Number of circuits: 5, 410
- Number of connectors: 6
- Connector Shape: D Shape
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: SKLS-0140389
- Our price: 57,10 €
- Manufacturer: STARK
- EAN number: 4059191233786
- Condition: New
- Oxygen Sensor: Heated
- Conductor Number: 636
- for OE number: 36531P28A01
- Quality: Zr High Impedance, OE EQUIVALENT
- Resistance [Ohm]: 16
- Item number: 81601
- Our price: 57,45 €
- Manufacturer: MEAT & DORIA
- EAN number: 803341927868
- Condition: New
price incl. 19% VAT
-
- Exhaust System: after catalytic converter
- Construction Year from: 07 / 2005
- Fitting Position: after catalytic converter
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 500
- Number of pins: 4
- Weight [kg]: 0,12
- Technical Information Number: Sensor Type:Planar
- Item number: XLOS2004
- Our price: 57,88 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5022515177560
- Condition: New
Universal
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Overall Length [mm]: 330
- Number of circuits: 4
- Recommended change interval [km]: 250000
- Available as universal article as well, see article no.: 0258986602
- Item number: 0 258 006 749
- Our price: 58,91 €
- Manufacturer: BOSCH
- EAN number: 3165144062080
- Condition: New
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Fitting Position: Right
- Number of pins: 4
- Length [mm]: 220
- Conductor Number: 4
- Connector Shape: round
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: SKLS-0140123
- Our price: 62,45 €
- Manufacturer: STARK
- EAN number: 4059191294671
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Oxygen Sensor: Broadband oxygen sensor
- Cable Length [mm]: 410
- Number of pins: 5
- for OE number: 0035427018, 13627791592
- Item number: 81577
- Our price: 62,80 €
- Manufacturer: MEAT & DORIA
- EAN number: 803341928489
- Condition: New

- Oxygen Sensor: Oxygen Sensor
- Number of pins: 6
- Length [mm]: 560
- Item number: 21287
- Our price: 62,98 €
- Manufacturer: OSSCA
- EAN number: 6915093212879
- Condition: New
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- Cable Length [mm]: 380
- Number of pins: 4
- for OE number: 0045420818
- Item number: 81574
- Our price: 63,38 €
- Manufacturer: MEAT & DORIA
- EAN number: 803341928548
- Condition: New
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Oxygen Sensor: Finger probe
- Number of circuits: 4
- Transmission Type: Manual Transmission
- Connector / Clamp: Connector may need adjustment
- Item number: 59-0014
- Our price: 63,66 €
- Manufacturer: MAXGEAR
- EAN number: 5907558570892
- Condition: New
-
- Engine Code: M272.940
- Construction Year from: 06 / 2005
- Transmission Type: Automatic Transmission
- Fitting Position: Left, after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Product line: Original Quality
- Thread Size: M18 x 1,5, M18x1,5
- Oxygen Sensor: Heated, Thread pre-greased
- Number of pins: 4
- Length [mm]: 720
- Number of circuits: 4
- for OE number: 002 540 08 17
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Socket colour: black
- Packaging height [cm]: 9,2
- Item number: V30-76-0017
- Our price: 65,77 €
- Manufacturer: VEMO
- EAN number: 4046001313875
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- 1
- 2
- 3
- 4
- 5