Mercedes S211 E 55 T AMG Kompressor Lambda sensor (476 hp Petrol M 113.990)
Recommended part replacement interval for your car for the part category Lambda sensor: every 100.000 km
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 530
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening / mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0167P
- Our price: 16,75 €
- Manufacturer: RIDEX PLUS
- EAN number: 4066423657111
- Condition: New
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening / mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: 3922L0167
- Our price: 41,46 €
- Manufacturer: RIDEX
- EAN number: 4059191378500
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Thread Size: M18x1,5
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Cable Length [mm]: 450
- Number of circuits: 4
- Item number: 0895650
- Our price: 29,90 €
- Manufacturer: METZGER
- EAN number: 4062101214379
- Condition: New
price incl. 19% VAT
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Oxygen Sensor: Heated
- Cable Length [mm]: 340
- Number of pins: 4
- Assy. / disassy. by qualified personnel required!
- Item number: 6PA 358 221-501
- Our price: 34,27 €
- Manufacturer: HELLA
- EAN number: 4082300897982
- Condition: New
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 480
- Number of circuits: 4
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector / Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening / mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: SKLS-0140080
- Our price: 41,46 €
- Manufacturer: STARK
- EAN number: 4059191111596
- Condition: New
price incl. 19% VAT
excl. delivery costs

- Oxygen Sensor: Heated
- Number of circuits: 4
- Item number: 9 7164 1
- Our price: 46,45 €
- Manufacturer: GEBE
- EAN number: 4057541251350
- Condition: New
- Oxygen Sensor: Regulating Probe, Heated
- Cable Length [mm]: 400
- Number of circuits: 4
- Weight [kg]: 0,082
- Spanner Size: 22
- External Thread Size: M18x1,5
- Item number: 33 10 3189
- Our price: 47,00 €
- Manufacturer: SWAG
- EAN number: 4054228759321
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 380
- Item number: ES20313-12B1
- Our price: 49,22 €
- Manufacturer: DELPHI
- EAN number: 5012759388662
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector / Clamp: Connector may need adjustment
- Item number: 0 258 986 615
- Our price: 50,31 €
- Manufacturer: BOSCH
- EAN number: 3165144056461
- Condition: New
- Oxygen Sensor: Regulating Probe, Heated
- Cable Length [mm]: 400
- Number of circuits: 4
- Weight [kg]: 0,082
- Spanner Size: 22
- External Thread Size: M18x1,5
- Item number: 175932
- Our price: 51,90 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224759325
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Construction Year to: 05 / 2006
- Exhaust System: for pre-catalytic converter
-
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Planar probe, Heated
- Cable Length [mm]: 470
- Item number: ES20175-12B1
- Our price: 54,18 €
- Manufacturer: DELPHI
- EAN number: 5012759407349
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Thread Size: M18x1,5
- Oxygen Sensor: Heated
- Cable Length [mm]: 900
- Number of pins: 4
- Voltage [V]: 12
- Item number: 70785
- Our price: 54,29 €
- Manufacturer: AIC
- EAN number: 4046283707850
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: before catalytic converter, after catalytic converter
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Number of circuits: 4
- Connector / Clamp: Connector may need adjustment
- Item number: 59-0015
- Our price: 66,86 €
- Manufacturer: MAXGEAR
- EAN number: 5907558562477
- Condition: New
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Overall Length [mm]: 450
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Available as universal article as well, see article no.: 0258986615
- Item number: 0 258 006 328
- Our price: 69,12 €
- Manufacturer: BOSCH
- EAN number: 3165143142783
- Condition: New
-
- Construction Year to: 05 / 2006
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Overall Length [mm]: 420
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Available as universal article as well, see article no.: 0258986615
- Item number: 0 258 006 272
- Our price: 69,71 €
- Manufacturer: BOSCH
- EAN number: 3165143142776
- Condition: New
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Length [mm]: 400
- Number of circuits: 4
- Number of pins: 4
- Item number: 8845 23015
- Our price: 87,46 €
- Manufacturer: TRISCAN
- EAN number: 5710476193353
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: M 113.990
- Fitting Position: before catalytic converter
- Oxygen Sensor: Regulating Probe
- Supplementary Info: Made in Italy - OE Equivalent
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 400
- Number of circuits: 4
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.998.240
- Item number: 1.998.284
- Our price: 90,45 €
- Manufacturer: EPS
- EAN number: 8012510254172
- Condition: New
1.997.324
- Weight [g]: 120
- Item number: 10 012 0090
- Our price: 96,16 €
- Manufacturer: RMS
- EAN number: G0R0TK
- Condition: New
-
- TecDoc Engine Number: M 113.990
- Fitting Position: before catalytic converter
- Oxygen Sensor: Regulating Probe
- Supplementary Info: Made in Italy - OE Equivalent
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 400
- Number of circuits: 4
- Conductor Number: 4
- Available as universal article as well, see article no.: 10.8240
- Item number: 10.8284
- Our price: 98,19 €
- Manufacturer: FACET
- EAN number: 8012510254172
- Condition: New
10.7324
price incl. 19% VAT

-
- Fitting Position: after catalytic converter
- Construction Year to: 05 / 2006
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 440
- Number of pins: 4
- Length [mm]: 135
- Item number: XLOS1404
- Our price: 108,94 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5022515170813
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5