VW Multivan T6 2.0 TDI 4motion Lambda sensor (150 hp Diesel DNAA)
Recommended part replacement interval for your car for the part category Lambda sensor: every 100.000 km
- Voltage [V]: 12
- Cable Length [mm]: 395
- Supplementary Article / Supplementary Info: with control unit
- Number of pins: 5
- Supplementary Article / Supplementary Info Info 2: with cable
- Connector Shape: oval
- Oxygen Sensor: Thread pre-greased
- Number of mounting bores: 2
- Line insulation design: with silicone-coated woven-fibre insulation
- Item number: V10-72-0112
- Our price: 360,45 €
- Manufacturer: VEMO
- EAN number: 4062375165995
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Shape: Square
- Number of mounting bores: 2
- Supplementary Article / Supplementary Info Info 2: with cable
- Connector Shape: oval
- Socket colour: black
- Number of pins: 5
- for OE number: 04L907807AR, 04L 907 807 M
- Item number: 57072
- Our price: 448,19 €
- Manufacturer: MEAT & DORIA
- EAN number: 808888987371
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- TecDoc Engine Number: CXFA, CXHA
- Fitting Position: behind exhaust turbocharger
- Number of pins: 5
- Connector Shape: oval
- Socket colour: black
- not for OE number: 04L 907 807 GA, 04L 907 807 HC
- Item number: 0899390
- Our price: 525,28 €
- Manufacturer: METZGER
- EAN number: 4062101218889
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Number of pins: 5
- Number of circuits: 6
- for OE number: 04L907807GC
- Item number: 57137
- Our price: 592,05 €
- Manufacturer: MEAT & DORIA
- EAN number: 221006517420501174205
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- TecDoc Engine Number: CXFA
- Construction Year to: 11 / 2019
- Fitting Position: Front
- for PR number: 7CS
- Item number: 0 281 008 779
- Our price: 238,97 €
- Manufacturer: BOSCH
- EAN number: 4047026582000
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- TecDoc Engine Number: CXFA, CXHA
- Construction Year from: 07 / 2019
- Fitting Position: Front
- Item number: 0 281 008 771
- Our price: 298,92 €
- Manufacturer: BOSCH
- EAN number: 4047026587227
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Production date from: 13.06.2016
- Model Year to: 2019
- Cable Length [mm]: 390
- Check OE number
- Observe the vehicle manufacturer specifications
- Observe mounting information
- Item number: P104136
- Our price: 339,80 €
- Manufacturer: PREXAparts
- EAN number: 4251162256187
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- TecDoc Engine Number: CXFA, CXHA
- Emission Key: 36W0, 36Y0
- Construction Year to: 12 / 2019
- Vehicle Identification Number (VIN) to: 7H-K-999 999
- Fitting Position: after soot particulate filter
- Cable Length [mm]: 600
- Number of pins: 5
- Cable Colour: black
- Item number: 92 09 7030
- Our price: 492,78 €
- Manufacturer: HJS
- EAN number: 4012588761446
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Material: Chrome-Molybdenum Steel
- Spanner Size: 22
- Item number: YT-1753
- Our price: 4,42 €
- Manufacturer: YATO
- EAN number: 5906083917530
- Drive side (profile): Rectangle
- Drive [inch]: 1 / 2
- Work side (profile): Hexagon
- Spanner Size: 22
- Length [mm]: 50
- Vehicle type: VW, BMW, Audi, Ford, Skoda, SEAT
- Weight [g]: 225
- Item number: HT8G323
- Our price: 6,75 €
- Manufacturer: Hogert Technik
- EAN number: 5902801216091
- Spanner Size: 1 / 2x7 / 8x50mmL
- Weight [g]: 250
- Item number: 907G2-01
- Our price: 7,87 €
- Manufacturer: FORCE
- EAN number: FOR 907G2-01
- Bolt Head- / Nut Design: Hexagon, Double Hexagon
- Spanner Size: 22 mm
- Drive [inch]: 3 / 8"
- Square Drive Tang Size [mm (inch)]: 10 (3 / 8")
- Item number: 9G1403
- Our price: 13,18 €
- Manufacturer: FORCE
- EAN number: 4711436280718
- Material: Chrome Vanadium Steel, Chrome-Molybdenum Steel
- Length [mm]: 30-80
- Number of tools: 3
- Spanner Size: 22
- Item number: YT-1752
- Our price: 13,56 €
- Manufacturer: YATO
- EAN number: 5906083917523
- Spanner Size: 22
- Work side (profile): Hexagon
- Tool handle type: Non-slip Handle
- Surface: Polished, Chromed
- Material: Chrome Vanadium Steel
- Item number: OK-02.0601
- Our price: 23,86 €
- Manufacturer: ROOKS
- EAN number: 5906190900326
- Spanner Size: 22
- Length [mm]: 75
- Width [mm]: 140
- Height [mm]: 32
- Quality: Premium
- Weight [kg]: 0,153
- Drive [inch]: 3 / 8
- Work side (profile): Hexagon
- Vehicle type: VW, BMW, Nissan
- Weight [g]: 167
- Item number: 26040L
- Our price: 34,29 €
- Manufacturer: SW-Stahl
- EAN number: 4033592022552
- Condition: New
- Spanner Size: 22,0
- Bolt Head- / Nut Design: Hexagon
- DIN / ISO: DIN 3120, ISO 1174
- Total Length [mm]: 110
- Weight [g]: 280
- Drive [inch]: 1 / 2
- Item number: 150.2120
- Our price: 37,21 €
- Manufacturer: KS TOOLS
- EAN number: 4042146694978
- Condition: New
Lambda sensor socket, flexible grip,22mm, 240mm •optional 6 and 12 point (duplicate socket)
•special socket for assembling and dismantling of stuck Lambda sensors that are difficult to access
•for almost all vehicle types
�180° freely-revolving joint
•time-saving to work with, even for hard-to-reach Lambda sensors
•prevents disassembly and assembly of protective shield
•flat and half-opened design
•for professional and damage-free use
•universal application and highly durable
•chrome vanadium
price incl. 19% VAT
- Spanner Size: 22
- Length [mm]: 75
- Width [mm]: 140
- Height [mm]: 32
- Quality: Premium
- Weight [kg]: 0,149
- Drive [inch]: 3 / 8
- Work side (profile): Hexagon
- Vehicle type: VW, BMW, Nissan
- Packaging: in plastic holder
- Weight [g]: 167
- Item number: 26040SB
- Our price: 37,55 €
- Manufacturer: SW-Stahl
- EAN number: 4033592037792
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Bolt Head- / Nut Design: Hexagon
- Spanner Size: 22
- Material: Chrome Vanadium Steel
- Depth [mm]: 30
- Surface: Chromed, Polished
- Machining: Hardened
- Item number: SX0222
- Our price: 40,26 €
- Manufacturer: SEALEY
- EAN number: 5024209509800
- Quantity Unit: Kit
- Number of tools: 7
- Drive [inch]: 1 / 2, 3 / 8, 7 / 8, 1 / 16
- Item number: 11-881
- Our price: 46,06 €
- Manufacturer: NEO TOOLS
- EAN number: 5907558436884
- Condition: New
- short version
- Diameter 2 [mm]: 30,4
- Drive [mm]: 25
- Operating Mode: Manual (hand operated)
- Net weight [kg]: 0,23
- Spanner Size 1 [mm]: 22
- Depth [mm]: 7
- Length [mm]: 92
- Material: Chrome Vanadium Steel
- Surface: Chromed
- Drive side (profile): Rectangle
- Square Drive Tang Size [mm (inch)]: 12.5 (1 / 2")
- Output end (profile): Male Hex
- Item number: 4680-1
- Our price: 48,43 €
- Manufacturer: HAZET
- EAN number: 4000896165605
- Condition: New
HAZET Lambda probe socket 4680-1 � Square, hollow 12.5 mm •For lambda probes on NISSAN � FORD � VOLKSWAGEN � SEAT � (1/2 inch) � Outside hexagon profile � 22 mm ŠKODA etc.
•Optimal fit to the 6-point profile of the lambda probe
•Long design
•Surface: chrome-plated
•Made in Germany
•Drive: Square, hollow 12.5 mm (1/2 inch)
•Output: Outside hexagon profile
•Wrench size: 22 mm
•Dimensions / length: 92 mm
•Diameter d1 (output side): 30.4 mm
•Diameter d2 (drive side): 25 mm
•Net weight: 0.23 kg
•For manual operation
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5