Opel Corsa B 1.7 CDTI 16V Mirror adjustment switch (100 hp Diesel Z 17 DTH)
- Number of pins: 8
- Outer / Inner Mirror: manually foldable, Heatable
- Operating Mode: Electric
- Supplementary Info: OE-PART
- Item number: 0916234
- Our price: 24,15 €
- Manufacturer: METZGER
- EAN number: 4250032637651
- Condition: New
Not for vehicles with powered retractable door mirrors
price incl. 19% VAT
excl. delivery costs
- Number of connectors: 8
- Fitting Position: Interior Door Panel, Driver side
- Weight [kg]: 0,02
- Colour: black
- Item number: 40477
- Our price: 30,68 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816404774
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Operating Mode: Electric
- Fitting Position: Driver side
- Number of pins: 8
- Item number: V40-73-0075
- Our price: 32,89 €
- Manufacturer: VEMO
- EAN number: 4046001939884
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Number of connectors: 8
- Fitting Position: Interior Door Panel, Driver side
- Weight [kg]: 0,02
- Colour: black
- Item number: 40 94 0477
- Our price: 22,81 €
- Manufacturer: SWAG
- EAN number: 4044688404770
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Number of connectors: 8
- Item number: 662337
- Our price: 59,45 €
- Manufacturer: ERA
- EAN number: 8053379080069
- Condition: New
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG3405
- Manufacturer: DELPHI
- EAN number: 5012759086506
- Condition: New
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 40,5
- Surface: Oiled
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0100 / 1602
- Drilled: no
- Item number: BG3771
- Manufacturer: DELPHI
- EAN number: 5012759280683
- Condition: New
price incl. 19% VAT
-
- Construction Year from: 06 / 2003
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: O1411V
- Manufacturer: LPR
- EAN number: 8032532073834
- Condition: New
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: O1431P
- Manufacturer: LPR
- EAN number: 8032532073858
- Condition: New
-
- Construction Year from: 06 / 2003
- Fitting Position: Rear Axle
- Diameter [mm]: 264,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,8
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0694
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0250.1
- Manufacturer: ATE
- EAN number: 4006633029681
- Condition: New
-
- Construction Year from: 06 / 2003
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,8
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0115 / 0415
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0131.1
- Manufacturer: ATE
- EAN number: 4006633033244
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 06 / 2003
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 24,8
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0858 / 1213
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0131.1
- Manufacturer: ATE
- EAN number: 4006633094436
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E4 90R-02C0747 / 2816
- Drilled: no
- Item number: BG3406
- Manufacturer: DELPHI
- EAN number: 5012759086513
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 41,1
- Surface: Oiled
- Centering Diameter [mm]: 60,1
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Test Mark: E1 90R-02C0277 / 1910
- Drilled: no
- Item number: BG3569
- Manufacturer: DELPHI
- EAN number: 5012759174234
- Condition: New
-
- Construction Year from: 10 / 2003
- Construction Year to: 11 / 2005
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 24,8
- Fitting Position: Front Axle
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 615 521 6017
- Manufacturer: MEYLE
- EAN number: 4040074331767
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 110
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC4814
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604889
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 43
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4816
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604902
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 06 / 2003
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14
- Height [mm]: 43,8
- Width [mm]: 95,6
- Test Mark: E1 90R-01326 / 480
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2858.2
- Our price: 32,72 €
- Manufacturer: ATE
- EAN number: 4006633091121
- Condition: New
-
- Construction Year from: 06 / 2003
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0335 / 0224, E9 90R-02A1162 / 0788
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Item number: 13.0460-7179.2
- Our price: 42,57 €
- Manufacturer: ATE
- EAN number: 4006633117913
- Condition: New
-
- Construction Year from: 06 / 2003
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0258 / 0225
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7179.2
- Our price: 57,41 €
- Manufacturer: ATE
- EAN number: 4006633346979
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.