MERCEDES-BENZ E-Class Platform / Chassis (VF211) E 280 CDI Sensor, longitudinal- / lateral acceleration (190 hp Diesel OM 642.920)
- Fitting Position: Front axle both sides
- Item number: V30-72-0853
- Our price: 136,46 €
- Manufacturer: VEMO
- EAN number: 4062375004836
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Item number: P150019
- Our price: 40,04 €
- Manufacturer: PREXAparts
- EAN number: 4255661800186
- Condition: New
- Number of pins: 3
- Fitting Position: Front axle both sides
- Number of mounting bores: 2
- Item number: ZVK716
- Our price: 72,67 €
- Manufacturer: ZZVF
- EAN number: 2000000001900
- Condition: New
- Component Number: 048
- Sensor Type: Rotation Sensor
- Brakes- / Drive Dynamics Articles: for ESP
- Length [mm]: 85
- Width [mm]: 85
- Height [mm]: 35
- Item number: 0 265 005 753
- Our price: 390,45 €
- Manufacturer: BOSCH
- EAN number: 4047024248366
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Fitting Position: Front Axle
- Height [mm]: 64
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 25,4
- Test Mark: E1 90R-02C0074 / 1582
- Drilled: no
- Item number: BG3756
- Manufacturer: DELPHI
- EAN number: 5012759280539
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 68
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Test Mark: E1 90R-02C0957 / 2557
- Drilled: no
- Item number: BG3758
- Manufacturer: DELPHI
- EAN number: 5012759280553
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20
- Material: Low-Metallic
- Height [mm]: 67,6
- Width [mm]: 136,6
- WVA Number: 23743
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Article number of recommended accessories: 1987473070, 1987473586, 1987474966, 1987474743, 1987474338
- Observe technical data
- Item number: 0 986 494 285
- Our price: 41,36 €
- Manufacturer: BOSCH
- EAN number: 4047024666856
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32
- Fitting Position: Front Axle
- Height [mm]: 64,4
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 29,4
- Drilled: no
- Item number: BDC5632
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159097
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,4
- Fitting Position: Front Axle
- Height [mm]: 71,7
- Width [mm]: 119,5
- Test Mark: E9 90R-02A1279 / 0282
- MAPP code available
- Article number of recommended accessories: 13.0460-0155.2, 13.0460-0237.2, 13.0460-0275.2, 24.8190-0410.2, 24.8190-0416.2, 13.0460-0503.2, 13.0460-0507.2
- Observe dimensions
- Bore Distance 1 [mm]: 1,8
- Bore Distance 2 [mm]: 7,1
- Item number: 13.0460-4990.2
- Our price: 60,83 €
- Manufacturer: ATE
- EAN number: 4006633104418
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,4
- Product line: Ceramic
- Fitting Position: Front Axle
- Height [mm]: 71,7
- Width [mm]: 119,5
- Test Mark: E9 90R-02A1396 / 0282
- MAPP code available
- Article number of recommended accessories: 13.0460-0155.2, 13.0460-0237.2, 13.0460-0275.2, 24.8190-0410.2, 24.8190-0416.2
- Observe dimensions
- Bore Distance 1 [mm]: 1,8
- Bore Distance 2 [mm]: 7,1
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-4990.2
- Our price: 79,53 €
- Manufacturer: ATE
- EAN number: 4006633346771
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,7
- Product line: Ceramic
- Fitting Position: Rear Axle
- Height 1 [mm]: 59,6
- Height 2 [mm]: 57,5
- Width 2 [mm]: 139,8
- Width 1 [mm]: 141,1
- Test Mark: E9 90R-02A1242 / 4357
- MAPP code available
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7259.2
- Our price: 62,67 €
- Manufacturer: ATE
- EAN number: 4006633376396
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Quantity Unit: Axle Set
- Brake System: ATE
- Thickness [mm]: 15,5
- Fitting Position: Rear Axle
- Material: Low-Metallic
- Height 1 [mm]: 57,3
- Height [mm]: 57,3
- Height 2 [mm]: 59,4
- Width 2 [mm]: 141,2
- Width 1 [mm]: 140,1
- WVA Number: 23334
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with piston clip
- Article number of recommended accessories: 1987473070, 1987473586, 1987474966, 1987474430, 1987474323
- Observe technical data
- Item number: 0 986 424 699
- Our price: 28,64 €
- Manufacturer: BOSCH
- EAN number: 3165143662816
- Condition: New
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 68,3
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 041
- Manufacturer: BOSCH
- EAN number: 3165143686553
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Fitting Position: Rear Axle
- Height [mm]: 65,5
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C4M029ABE
- Manufacturer: ABE
- EAN number: 5901655214789
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Payload: for increased payload
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32
- Height [mm]: 64,5
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 29,4
- Test Mark: E1 90R-02C0074 / 1618
- Drilled: no
- Item number: BG3877
- Manufacturer: DELPHI
- EAN number: 5012759308967
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 68,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Drilled: no
- Item number: BDC5466
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438055450
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,7
- Fitting Position: Rear Axle
- Height 1 [mm]: 59,6
- Height 2 [mm]: 57,5
- Width 2 [mm]: 139,8
- Width 1 [mm]: 141,1
- Test Mark: E9 90R-02A1382 / 4357
- MAPP code available
- Item number: 13.0460-7259.2
- Our price: 45,70 €
- Manufacturer: ATE
- EAN number: 4006633348300
- Condition: New
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Fitting Position: Rear Axle
- Height [mm]: 68,0
- Surface: Coated
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180,0
- MAPP code available
- Test Mark: E1 90R-02C0296 / 1061
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0201.1
- Manufacturer: ATE
- EAN number: 4006633130127
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Payload: not for increased payload
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 64,5
- Surface: Coated
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 25,4
- Inner Diameter [mm]: 154,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0128-0142.1
- Manufacturer: ATE
- EAN number: 4006633130189
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Payload: for increased payload
- Diameter [mm]: 330,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32,0
- Height [mm]: 64,5
- Surface: Coated
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 29,4
- Inner Diameter [mm]: 154,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0261
- Bore Diameter [mm]: 15,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0132-0144.1
- Manufacturer: ATE
- EAN number: 4006633209632
- Condition: New
price incl. 19% VAT
excl. delivery costs