Citroen C4 Mk1 1.6 HDi Speed sensor (116 hp Diesel 9HY (DV6TED4))
-
- Transmission Type: 6-Speed Manual Transmission, automatically operated
-
- Transmission Type: Manual Transmission
- Transmission ID: MC
- Number of connectors: 2
- Weight [kg]: 0,03
- Item number: 37025
- Our price: 28,14 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816370253
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of mounting bores: 1
- Transmission Type: Manual Transmission
- Number of pins: 3
- Item number: V22-72-0169
- Our price: 36,74 €
- Manufacturer: VEMO
- EAN number: 4062375155231
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Transmission Type: 6-Speed Manual Transmission, automatically operated
-
- Transmission Type: Manual Transmission
- Transmission ID: MC
- Number of connectors: 2
- Weight [kg]: 0,03
- Item number: 62 93 7025
- Our price: 23,11 €
- Manufacturer: SWAG
- EAN number: 4044688370259
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 247
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 9
- Height [mm]: 35
- Centering Diameter [mm]: 71
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 7
- Thread Size: 13
- Manufacturer Restriction: TRW
- Drilled: no
- Item number: C4P007ABE
- Manufacturer: ABE
- EAN number: 5900427206106
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 283
- Brake Disc Thickness [mm]: 26
- Height [mm]: 34,2
- Number of Holes: 4
- Minimum thickness [mm]: 24
- Drilled: no
- Item number: P1003V
- Manufacturer: LPR
- EAN number: 8032532086698
- Condition: New
-
- for RPO number from: 11431
- for RPO number up to: 12333
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0218
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2740.2
- Our price: 29,72 €
- Manufacturer: ATE
- EAN number: 4006633325882
- Condition: New
-
- for RPO number up to: 12056
- Fitting Position: Rear Axle
- Brake System: Bosch
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17,6
- Quantity Unit: Axle Set
- Height [mm]: 46,9
- Width [mm]: 94,8
- Test Mark: E1 90R-01832 / 643
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-3813.2
- Our price: 33,10 €
- Manufacturer: ATE
- EAN number: 4006633120555
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 01 / 2011
- Fitting Position: Rear Axle
- Manufacturer Restriction: Lukas
- Brake Caliper Type: Fist-type Caliper
- Brake System: Lucas-Girling
- Material: Low-Metallic
- Thickness [mm]: 16,3
- Quantity Unit: Axle Set
- Height [mm]: 53,2
- Width [mm]: 87,2
- WVA Number: 20960
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with bolts / screws
- Article number of recommended accessories: 1987473595, 1987474253, 1987474264, 1987474304, 1987474747, 1987474314, 1987474435, 1987474470, 1987474629, 1987474312
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 461 769
- Our price: 17,67 €
- Manufacturer: BOSCH
- EAN number: 3165143660010
- Condition: New
-
- for RPO number up to: 11584
- Fitting Position: Rear Axle
- for RPO number from: 12334
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 26,70 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles with ESP
- Fitting Position: Front Axle
- Brake System: Bosch
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 19,4
- Quantity Unit: Axle Set
- Height [mm]: 57,5
- Width [mm]: 136,8
- Test Mark: E1 90R-01484 / 400
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0454.2
- Number of bolts / screws: 2
- Observe dimensions
- Item number: 13.0460-3966.2
- Our price: 41,91 €
- Manufacturer: ATE
- EAN number: 4006633073608
- Condition: New
-
- for RPO number from: 11431
- for RPO number up to: 12333
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2740.2
- Our price: 42,80 €
- Manufacturer: ATE
- EAN number: 4006633374521
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for RPO number from: 12334
- Fitting Position: Rear Axle
- for RPO number up to: 11584
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2820.2
- Our price: 38,00 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for RPO number up to: 12056
- Fitting Position: Rear Axle
- Brake System: Bosch
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 46,9
- Width [mm]: 94,8
- Test Mark: E1 90R-011403 / 1445
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-3813.2
- Our price: 43,63 €
- Manufacturer: ATE
- EAN number: 4006633374682
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles with ESP
- Fitting Position: Front Axle
- Brake System: Bosch
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 19,4
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 57,5
- Width [mm]: 136,8
- Test Mark: E9 90R-02A1242 / 3536
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0454.2
- Number of bolts / screws: 2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-3966.2
- Our price: 57,27 €
- Manufacturer: ATE
- EAN number: 4006633374248
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Stub Axle Diameter [mm]: 30
- Fitting Position: Rear Axle
- Diameter [mm]: 249,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 69,2
- Surface: Coated
- Centering Diameter [mm]: 56,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 62,0
- Support plate diameter [mm]: 30
- Thread Size: M12x1,25
- MAPP code available
- Test Mark: E1 90R-02C0444 / 2505
- Supplementary Article / Supplementary Info Info 2: with wheel bearing, with ABS sensor ring
- Drilled: no
- Item number: 24.0109-0100.2
- Manufacturer: ATE
- EAN number: 4006633311793
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 247,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 35
- Surface: Coated
- Centering Diameter [mm]: 71,1
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 133,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1000
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0109-0137.1
- Manufacturer: ATE
- EAN number: 4006633091954
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Stub Axle Diameter [mm]: 25
- Fitting Position: Rear Axle
- Diameter [mm]: 249,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 67,1
- Surface: Coated
- Centering Diameter [mm]: 55,9
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 60,0
- Support plate diameter [mm]: 25
- Thread Size: M12x1,25
- MAPP code available
- Test Mark: E1 90R-02C0444 / 2505
- Supplementary Article / Supplementary Info Info 2: with wheel bearing, with ABS sensor ring
- Drilled: no
- Item number: 24.0109-0150.2
- Manufacturer: ATE
- EAN number: 4006633322867
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles with ESP
- Fitting Position: Front Axle
- Diameter [mm]: 283,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 26,0
- Height [mm]: 34,2
- Surface: Coated
- Centering Diameter [mm]: 66,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 24,0
- Inner Diameter [mm]: 133,5
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0488
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0126-0120.1
- Manufacturer: ATE
- EAN number: 4006633100007
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles with ESP
- Fitting Position: Front Axle
- Diameter [mm]: 283,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 26,0
- Height [mm]: 34,2
- Surface: Coated
- Centering Diameter [mm]: 66,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 24,0
- Inner Diameter [mm]: 133,5
- MAPP code available
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0326-0120.1
- Manufacturer: ATE
- EAN number: 4006633120418
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 01 / 2011
- Fitting Position: Front Axle
- Diameter [mm]: 282,6
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 26,1
- Height [mm]: 34,3
- Surface: Coated
- Centering Diameter [mm]: 66,1
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 24
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,9
- Drilled: no
- Item number: 0 986 478 979
- Manufacturer: BOSCH
- EAN number: 3165143442630
- Condition: New