Mitsubishi Lancer 8 Saloon EVO X Spark plug (301 hp Petrol 4B11-T/C)
Recommended part replacement interval for your car for the part category Spark plug: every 90.000 km / every 6 years
- Electrode Gap [mm]: 0,9
- Spanner Size: 16
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 0 242 235 912
- Manufacturer: BOSCH
- EAN number: 3165143506196
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Product line: Nickel
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Spanner Size: 16 mm
- Thread Length [mm]: 12,7
- Thread Size: M10x1.0
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter [mm]: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Item number: U20FS-U
- Manufacturer: DENSO
- EAN number: 0042511040021
- Condition: New
- Electrode Gap [mm]: 0,7
- Spanner Size: 16
- Thread Length [mm]: 26,5
- Spark Position [mm]: 4
- Required quantity: 4
- Tightening Torque [Nm]: 23
- Number of pins: 1
- Item number: 0 242 145 611
- Manufacturer: BOSCH
- EAN number: 4047026822502
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Product line: Q+, original equipment manufacturer quality
- Spark Plug: 3 - Earthed Electrode
- Electrode Gap [mm]: 0,8
- Construction Year from: 09 / 2009
- Weight [kg]: 0,048
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Item number: V99-75-0014
- Manufacturer: VEMO
- EAN number: 4046001300240
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Construction Year to: 09 / 2010
- TecDoc Engine Number: 4B11-T / C
- Required quantity: 4
- Fuel Type: CNG / LPG
- Product line: Iridium
- Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode
- Thread Length [mm]: 26,5
- Thread Size: M12x1.25
- Diameter [mm]: 12
- for OE number: 8-97380046-0
- Gross Weight [g]: 49
- alternative item: -
- Item number: GX8-1
- Manufacturer: DENSO
- EAN number: 042511034624
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Country Specific Design: Europe
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Height 1 [mm]: 64
- Height 2 [mm]: 64
- Width 2 [mm]: 86,9
- Width 1 [mm]: 87,2
- Thickness 1 [mm]: 13,6
- Thickness 2 [mm]: 13,6
- WVA Number: 24827, 24849
- Test Mark: E9 90R-02A0825 / 2543
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1368-8477
- Friction Lining Material: Semi-Metallic
- Item number: LP2177
- Our price: 17,13 €
- Manufacturer: DELPHI
- EAN number: 5012759442227
- Condition: New
4 identical pads
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Rear Axle
- Length [mm]: 108,4
- Width [mm]: 41,5
- Thickness 1 [mm]: 14,5
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,79
- Observe service information
- Rim Size [inch]: 16.0
- Item number: 16659
- Our price: 16,43 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816166597
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14,8
- Product line: COTEC
- Fitting Position: Front Axle
- Height [mm]: 77,3
- Width [mm]: 131,8
- Test Mark: E9 90R - 01107 / 209
- Manufacturer Restriction: BREMBO
- Item number: GDB3349
- Our price: 36,58 €
- Manufacturer: TRW
- EAN number: 3322937367955
- Condition: New
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14,3
- Fitting Position: Rear Axle
- Height [mm]: 63,5
- Width [mm]: 86,7
- Test Mark: E9 90R - 01120 / 2543
- Manufacturer Restriction: BREMBO
- Item number: GDB3488
- Our price: 26,67 €
- Manufacturer: TRW
- EAN number: 3322937955039
- Condition: New
-
- Fitting Position: Front Axle
- Rim Size [inch]: 16.0
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,7
- Material: Low-Metallic
- Height [mm]: 58,4
- Width [mm]: 149,7
- WVA Number: 21363
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Manufacturer Restriction: AKEBONO System
- Article number of recommended accessories: 1987474231, 1987474377, 1987474325, 1987474232
- Observe technical data
- Item number: 0 986 424 523
- Our price: 23,47 €
- Manufacturer: BOSCH
- EAN number: 3165143723722
- Condition: New
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 45,9
- Surface: Oiled
- Centering Diameter [mm]: 69
- Number of Holes: 5
- Bolt Hole Circle 脴 [mm]: 114,3
- Minimum thickness [mm]: 22,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,7
- Drilled: no
- Item number: 0 986 479 372
- Manufacturer: BOSCH
- EAN number: 4047024293243
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14,8
- Fitting Position: Front Axle
- Material: Low-Metallic
- Height [mm]: 77,3
- Width [mm]: 131,8
- WVA Number: 23092
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Article number of recommended accessories: 1987474232, 1987474241, 1987474440, 1987474746, 1987474680, 1987474724, 1987474480
- Observe technical data
- Item number: 0 986 494 395
- Our price: 40,77 €
- Manufacturer: BOSCH
- EAN number: 4047024792067
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,5
- Product line: PREMIER ECO FRICTION
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: without accessories
- Number of wear indicators [per axle]: 2
- Width [mm]: 131,8
- WVA Number: 23092, 23110, 23111
- Test Mark: R90 Homologated
- Weight [kg]: 2,109
- directional
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 16,764
- Packaging width [cm]: 9,906
- Packaging height [cm]: 6,604
- Item number: FDB1968
- Our price: 46,22 €
- Manufacturer: FERODO
- EAN number: 4044197382774
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: without accessories
- Number of wear indicators [per axle]: 2
- Height [mm]: 77
- Width [mm]: 132
- WVA Number: 23092, 23325
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: P 54 039
- Our price: 34,73 €
- Manufacturer: BREMBO
- EAN number: 8020584061329
- Condition: New
-
- Fitting Position: Front Axle
- Country Specific Design: Europe
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 77,2
- Height 2 [mm]: 77,2
- Width 2 [mm]: 131,6
- Width 1 [mm]: 132
- Thickness 1 [mm]: 15
- Thickness 2 [mm]: 15
- WVA Number: 23092, 23325
- Test Mark: E9 90R-01841 / 209
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1001
- Friction Lining Material: Semi-Metallic
- Item number: LP1858
- Our price: 31,30 €
- Manufacturer: DELPHI
- EAN number: 5012759281383
- Condition: New
3 Plain pads, 1 pad + spring W.I.
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Length [mm]: 149,7
- Width [mm]: 58,4
- Thickness 1 [mm]: 15,4
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,87
- Observe service information
- Rim Size [inch]: 16.0
- Item number: 16776
- Our price: 21,95 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167761
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Length [mm]: 150
- Width [mm]: 58
- Thickness 1 [mm]: 15
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,87
- Observe service information
- Rim Size [inch]: 16.0
- Item number: ADC44250
- Our price: 18,95 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063442502
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Length [mm]: 87
- Width [mm]: 64
- Thickness 1 [mm]: 14
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,1
- Observe service information
- Rim Size [inch]: 18.0
- Item number: ADC44276
- Our price: 18,16 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063006636
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Surface: Coated
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle 脴 [mm]: 114
- Thickness [mm]: 58
- Minimum thickness [mm]: 20
- Weight [kg]: 8,950
- Number of mounting bores: 3
- Observe service information
- Drilled: no
- Item number: ADC443118
- Manufacturer: BLUE PRINT
- EAN number: 5050063002348
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Rear Axle
- Length [mm]: 108
- Width [mm]: 42
- Thickness 1 [mm]: 15
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,79
- Observe service information
- Rim Size [inch]: 16.0
- Item number: ADS74219
- Our price: 16,11 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063742190
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.