Toyota Yaris Mk1 1.4 D-4D Steering hose / pipe (75 hp Diesel 1ND-TV)
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Parameter: Pressure Hose, From Pump
- Item number: 58536
- Our price: 83,96 €
- Manufacturer: AIC
- EAN number: 4046283585366
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- Transmission Type: Manual Transmission
- Fitting Position: from hydraulic pump to steering gear
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Item number: 8516 13001
- Our price: 57,50 €
- Manufacturer: TRISCAN
- EAN number: 5710476455673
- Condition: New
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Fitting Position: from hydraulic pump to steering gear
- Item number: 58610
- Our price: 64,43 €
- Manufacturer: AIC
- EAN number: 4046283586103
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
excl. delivery costs
- Fabrication Number: SPH-TY-002
- Item number: SPH-TY-002
- Our price: 66,73 €
- Manufacturer: NTY
- EAN number: 5902048243140
- Condition: New
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Forward- / Backflow: for backflow
- Parameter: Gear to Pump
- Item number: 58633
- Our price: 71,42 €
- Manufacturer: AIC
- EAN number: 4046283586332
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
- Fitting Position: Rear Axle
- for model code: Vitz, Yaris
- Diameter [mm]: 269
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Height [mm]: 55,5
- Surface: Oiled
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0967 / 2517
- Drilled: no
- Item number: BG3867
- Manufacturer: DELPHI
- EAN number: 5012759308868
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 2001
- Construction Year to: 08 / 2005
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 255
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Number of Holes: 4
- Minimum thickness [mm]: 18
- Drilled: no
- Item number: T2880V
- Manufacturer: LPR
- EAN number: 8032532088500
- Condition: New
-
- Fitting Position: Front Axle
- Braking System: for vehicles with drum brakes on the rear axle
- Diameter [mm]: 235
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 18
- Height [mm]: 43,1
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 16
- Drilled: no
- Item number: BDC5117
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593614901
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 2003
- Construction Year to: 08 / 2005
- Braking System: for vehicles with drum brakes on the rear axle
- Fitting Position: Front Axle
- Brake System: Bosch
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height 1 [mm]: 45,0
- Height 2 [mm]: 51,0
- Width [mm]: 130,7
- Test Mark: E9 90R-02A1206 / 1045
- MAPP code available
- Item number: 13.0460-5800.2
- Our price: 37,36 €
- Manufacturer: ATE
- EAN number: 4006633089777
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 269
- Brake Disc Type: solid
- Construction Year to: 03 / 2003
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 56
- Surface: Coated
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 173
- Bore Diameter [mm]: 14,5
- Drilled: no
- Item number: C42019ABE
- Manufacturer: ABE
- EAN number: 5900427203303
- Condition: New
price incl. 19% VAT
-
- Observe technical data
- Fitting Position: Front Axle
- Braking System: for vehicles with drum brakes on the rear axle
- Vehicle Production Country: France, Japan
- Diameter [mm]: 235
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 18
- Height [mm]: 43,2
- Surface: Coated
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 16
- Inner Diameter [mm]: 129
- Hub Diameter [mm]: 55
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0064 / 0282
- Drilled: no
- Item number: J3302151
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416151645
- Condition: New
price incl. 19% VAT
-
- Observe technical data
- Fitting Position: Front Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Vehicle Production Country: France, Japan
- Diameter [mm]: 255
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 43
- Surface: Coated
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 18
- Inner Diameter [mm]: 128,8
- Hub Diameter [mm]: 55
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0064 / 0020
- Drilled: no
- Item number: J3302128
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416113339
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
-
- Fitting Position: Front Axle
-
- Fitting Position: Front Axle
- Braking System: for vehicles with drum brakes on the rear axle
- Diameter [mm]: 235
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 17,9
- Height [mm]: 43,2
- Surface: Oiled
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 16
- Test Mark: E1 90R-02C0957 / 2562
- Drilled: no
- Item number: BG3519
- Manufacturer: DELPHI
- EAN number: 5012759140529
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
-
- Fitting Position: Front Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 255
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 43
- Surface: Oiled
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 18
- Test Mark: E1 90R-02C0074 / 1603
- Drilled: no
- Item number: BG3520
- Manufacturer: DELPHI
- EAN number: 5012759140536
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 2001
- Construction Year to: 08 / 2005
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 269
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Height [mm]: 55,5
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: T2003P
- Manufacturer: LPR
- EAN number: 8032532108772
- Condition: New
price incl. 19% VAT
-
- Construction Year from: 12 / 2001
- Construction Year to: 08 / 2005
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Braking System: for vehicles with drum brakes on the rear axle
- Diameter [mm]: 235
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 18
- Height [mm]: 43
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 16
- Drilled: no
- Item number: T2941V
- Manufacturer: LPR
- EAN number: 8032532075814
- Condition: New
-
- Fitting Position: Rear Axle
- Brake System: Akebono
- Diameter [mm]: 269
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Height [mm]: 55,7
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC5482
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438055467
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 2001
- Construction Year to: 08 / 2005
- Braking System: for vehicles with disc brakes on the rear axle
- Fitting Position: Front Axle
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,5
- Quantity Unit: Axle Set
- Height [mm]: 51,6
- Height 2 [mm]: 54,5
- Width [mm]: 116,3
- Test Mark: E1 90R-02A0335 / 0592
- MAPP code available
- Item number: 13.0460-5810.2
- Our price: 36,06 €
- Manufacturer: ATE
- EAN number: 4006633112024
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 2001
- Construction Year to: 03 / 2003
- Braking System: for vehicles with drum brakes on the rear axle
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,5
- Quantity Unit: Axle Set
- Height [mm]: 46,7
- Width [mm]: 112,4
- Test Mark: E1 90R-01870 / 368
- MAPP code available
- Item number: 13.0460-5811.2
- Our price: 25,50 €
- Manufacturer: ATE
- EAN number: 4006633112048
- Condition: New
-
- Construction Year from: 12 / 2001
- Construction Year to: 08 / 2005
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Brake System: Sumitomo
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14
- Quantity Unit: Axle Set
- Height 1 [mm]: 52,0
- Height 2 [mm]: 55,6
- Width [mm]: 78,5
- Test Mark: E9 90R-01231 / 273
- MAPP code available
- Article number of recommended accessories: 13.0460-0136.2
- Observe dimensions
- Item number: 13.0460-5812.2
- Our price: 21,70 €
- Manufacturer: ATE
- EAN number: 4006633139595
- Condition: New