Vehicle identification number: 4136620
Alfa Romeo 156 Sportwagon 2.4 JTD Suspension arm (163 hp Diesel 841 M.000)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Lower, Front
- Item number: D120422
- Manufacturer: DENCKERMANN
- EAN number: 2218610976223
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Steel
- Fitting Position: in front of axle, Rear Axle Left, Rear Axle Right, outer, Lower
- Length [mm]: 560
- paired article number: 260351
- Weight [kg]: 0,698
- Item number: 260351
- Manufacturer: A.B.S.
- EAN number: 8717109346350
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Trailing Arm
- Material: Steel
- Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, outer, Lower
- Length [mm]: 593
- paired article number: 260350
- Weight [kg]: 0,726
- Item number: 260350
- Manufacturer: A.B.S.
- EAN number: 8717109346343
- Condition: New
Important: Observe Fitting Instructions
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left, Lower
- Rod / Strut: Coupling Rod
- Item number: 49399214
- Manufacturer: CORTECO
- EAN number: 2214012848309
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Steel
- Fitting Position: behind the axle, Rear Axle Left, Rear Axle Right, outer, Lower
- Length [mm]: 593
- Weight [kg]: 0,726
- Item number: GT20-124
- Manufacturer: GT-BERGMANN
- EAN number: GT20-124
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Lower, Front
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Bag
- Packaging length [cm]: 76,5
- Packaging width [cm]: 9
- Packaging height [cm]: 7
- Item number: AL-TC-3624
- Manufacturer: MOOG
- EAN number: 4044197316816
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle, Rear Axle Lower, Front
- Length [mm]: 560
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 6
- Packaging height [cm]: 2
- Packaging Depth [cm]: 61
- Item number: V24-9516
- Manufacturer: VAICO
- EAN number: 4046001399916
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Lower, Front
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 0,7
- Colour: black
- Item number: GT20-125
- Manufacturer: GT-BERGMANN
- EAN number: GT20-125
- Condition: New
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, Lower, in front of axle, both sides
- Length [mm]: 615
- Height [mm]: 32
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 58
- Item number: TC1593
- Manufacturer: DELPHI
- EAN number: 5012759390573
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Lower, Rear
- Item number: D120421
- Manufacturer: DENCKERMANN
- EAN number: 2218610976222
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle, both sides, Rear, Rear Axle Lower
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 3
- Packaging height [cm]: 6,1
- Packaging Depth [cm]: 65,3
- Item number: V24-7107
- Manufacturer: VAICO
- EAN number: 4046001367854
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Lower, Rear
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Bag
- Packaging length [cm]: 76,5
- Packaging width [cm]: 9
- Packaging height [cm]: 7
- Item number: AL-TC-3623
- Manufacturer: MOOG
- EAN number: 4044197316809
- Condition: New
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, Lower, behind the axle, both sides
- Length [mm]: 648
- Height [mm]: 32
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 58
- Item number: TC1594
- Manufacturer: DELPHI
- EAN number: 5012759390580
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Lower, Front
- Weight [kg]: 0,71
- Net weight [kg]: 0,73
- Gross Weight [kg]: 0,73
- Item number: 23145B-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083167459
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Rear, Rear Axle Right
- Weight [kg]: 0,77
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 74 92 3143
- Manufacturer: SWAG
- EAN number: 4044688518323
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Rear
- Length [mm]: 595
- Item number: QDL5291S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438128550
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Rear, Rear Axle Right
- Weight [kg]: 0,77
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 23143
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816231431
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, Rear
- Length [mm]: 592
- Required quantity: 2
- Weight [kg]: 0,77
- Item number: 72-1493
- Manufacturer: MAXGEAR
- EAN number: 5907558549416
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Lower, Front Axle
- Length [mm]: 560
- Item number: 72-1494
- Manufacturer: MAXGEAR
- EAN number: 5907558549423
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Front
- Length [mm]: 560
- Item number: QDL5290S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438128543
- Condition: New
- 1
- 2
- 3
- 4
- 5