Vehicle identification number: 0591399
AUDI 200 C2 Saloon (43) 2.1 5T Suspension arm (170 hp Petrol WJ)
-
- Vehicle Identification Number (VIN) from: 43C 022303
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles with power steering
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Control / Trailing Arm Type: Trailing Arm
- Cone Size [mm]: 18,00
- Fitting Position: Front Axle Right, Lower
- Item number: 273C0297
- Manufacturer: RIDEX
- EAN number: 4059191408801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Left
- Length [mm]: 380
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: 273C0288
- Manufacturer: RIDEX
- EAN number: 4059191408245
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Length [mm]: 380
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Required quantity: 1
- Control / Trailing Arm Type: Control Arm, Trailing Arm
- Material: Steel
- Cone Size [mm]: 18,00
- Item number: 772S0870
- Manufacturer: RIDEX
- EAN number: 4066016907609
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Vehicle Identification Number (VIN) from: 43-C-022303
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left, Lower
- paired article number: 49697 / 1
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 1
- Vehicle Equipment: for vehicles with power steering
- Item number: 49696/1
- Manufacturer: MAPCO
- EAN number: 4043605065407
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Vehicle Identification Number (VIN) from: *43*C*022303
- Diameter [mm]: 18
- Fitting Position: Front Axle Right, Lower
- paired article number: 01264
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,500
- Observe service information
- Item number: 01269
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816012696
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Left
- Length [mm]: 380
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: SKCA-0050286
- Manufacturer: STARK
- EAN number: 4059191073702
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 10 / 1981
- Vehicle Identification Number (VIN) from: 43-C-022-303
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Lower Front Axle
- paired article number: V10-7122
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Vehicle Equipment: for vehicles with power steering
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Item number: V10-7121
- Manufacturer: VAICO
- EAN number: 4046001264948
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Construction Year from: 10 / 1981
- Vehicle Identification Number (VIN) from: 43-C-022-303
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- paired article number: V10-7121
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Vehicle Equipment: for vehicles with power steering
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Item number: V10-7122
- Manufacturer: VAICO
- EAN number: 4046001264955
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Trailing Arm
- Material: Cast Iron
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Left
- paired article number: 37383
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 37382
- Manufacturer: SIDEM
- EAN number: 5413978116249
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Cast Iron
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Right
- paired article number: 37382
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 37383
- Manufacturer: SIDEM
- EAN number: 5413978116256
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Cast Iron
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Left
- paired article number: 46162
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 46160
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978813117
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Cast Iron
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Right
- paired article number: 46160
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 46162
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978813124
- Condition: New
-
- Fitting Position: Front Axle Right
- Vehicle Equipment: for vehicles with power steering
- Vehicle Identification Number (VIN) from: ...44-M-002674
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 19
- paired article number: 821 0339 10
- Item number: 821 0340 10
- Manufacturer: FAG
- EAN number: 4014870397678
- Condition: New
-
- Vehicle Identification Number (VIN) from: 43.C022303
- Construction Year from: 10 / 1981
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 384
- Weight [kg]: 2,82
- Outer Diameter 2 [mm]: 18
- Item number: 95-05938
- Manufacturer: RTS
- EAN number: 20107203572714357271
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Vehicle Identification Number (VIN) from: *43*C*022303
- Diameter [mm]: 18
- Fitting Position: Front Axle Left, Lower
- paired article number: 01269
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,500
- Observe service information
- Item number: 01264
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816012641
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) from: 43.C022303
- Construction Year from: 10 / 1981
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 384
- Weight [kg]: 2,82
- Outer Diameter 2 [mm]: 18
- Item number: 95-05928
- Manufacturer: RTS
- EAN number: 20107203572710357271
- Condition: New
-
- Fitting Position: Front Axle Right
- Vehicle Equipment: for vehicles without power steering
- Vehicle Identification Number (VIN) from: ...43...C...0070011
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: 821 0341 10
- Item number: 821 0342 10
- Manufacturer: FAG
- EAN number: 4014870409654
- Condition: New
-
- Fitting Position: Front Axle Left
- Vehicle Equipment: for vehicles without power steering
- Vehicle Identification Number (VIN) from: ...43...C...0070011
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: 821 0342 10
- Item number: 821 0341 10
- Manufacturer: FAG
- EAN number: 4014870395766
- Condition: New
-
- Construction Year from: 08 / 1981, 10 / 1981
- Vehicle Equipment: for vehicles without power steering, for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Left, Lower, Front Axle
- paired article number: AU-TC-3909
- Packing Type: Box
- Packaging length [cm]: 48,5
- Packaging width [cm]: 14
- Packaging height [cm]: 11
- Item number: AU-TC-3908
- Manufacturer: MOOG
- EAN number: 5010874761759
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Cast Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 382
- paired article number: 210029
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,522
- as standard
- Item number: 210028
- Manufacturer: A.B.S.
- EAN number: 8717109310047
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- 1
- 2
- 3
- 4
- 5