Audi Coupe B2 2.1 GT Suspension arm (107 hp Petrol WE)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- Required quantity: 1
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Item number: 273C0173
- Manufacturer: RIDEX
- EAN number: 4059191647019
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Item number: 273C0183
- Manufacturer: RIDEX
- EAN number: 4059191208791
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: both sides, Lower Front Axle
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35,5
- Item number: V10-7117
- Manufacturer: VAICO
- EAN number: 4046001264894
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- Required quantity: 1
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Colour: black
- Item number: SKCA-0050170
- Manufacturer: STARK
- EAN number: 4059191053490
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Item number: SKCA-0050180
- Manufacturer: STARK
- EAN number: 4059191053483
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 09528
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 09527
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816095279
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 09527
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,179
- Vehicle Equipment: for vehicles without power steering
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 09528
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816095286
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 32 73 0006
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 30 73 0008
- Manufacturer: SWAG
- EAN number: 4044688504814
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle, Lower
- Vehicle Equipment: for vehicles without power steering
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 295
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Width [mm]: 44
- Item number: QSA1675S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593630079
- Condition: New
-
- Construction Year to: 12 / 1982
- Fitting Position: Front Axle, Right, outer, Lower
- Vehicle Identification Number (VIN) from: 81 A 173 589
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- paired article number: V10-9579
- Colour: black
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 35
- Packaging height [cm]: 6,2
- Packaging Depth [cm]: 36,5
- Item number: V10-9580
- Manufacturer: VAICO
- EAN number: 4046001413018
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 72-1026
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Vehicle Equipment: for vehicles without power steering
- Item number: 72-5491
- Manufacturer: MAXGEAR
- EAN number: 5903766373409
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 72-5491
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Item number: 72-1026
- Manufacturer: MAXGEAR
- EAN number: 5907558515176
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Vehicle Identification Number (VIN) from: 85-D-079 181
- Fitting Position: Front Axle Left, Lower
- paired article number: 49770
- Required quantity: 1
- Vehicle Equipment: for vehicles with power steering
- Item number: 49769
- Manufacturer: MAPCO
- EAN number: 4043605066206
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Vehicle Identification Number (VIN) from: 85-D-079 181
- Fitting Position: Front Axle Right, Lower
- paired article number: 49769
- Required quantity: 1
- Vehicle Equipment: for vehicles with power steering
- Item number: 49770
- Manufacturer: MAPCO
- EAN number: 4043605066220
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 30 73 0008
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Weight [kg]: 2,169
- Vehicle Equipment: for vehicles without power steering
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 32 73 0006
- Manufacturer: SWAG
- EAN number: 4044688505842
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1982
- Fitting Position: Left, outer, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- paired article number: V10-9580
- Colour: black
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 36
- Packaging height [cm]: 4
- Packaging Depth [cm]: 34
- Item number: V10-9579
- Manufacturer: VAICO
- EAN number: 4046001413001
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- paired article number: JTC357
- Item number: JTC359
- Manufacturer: TRW
- EAN number: 3322937904549
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle, Right, Lower
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- paired article number: VO-WP-0132
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: VO-WP-0131
- Manufacturer: MOOG
- EAN number: 5010874765436
- Condition: New
-
- Fitting Position: Front Axle, Left, Lower
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- paired article number: VO-WP-0131
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: VO-WP-0132
- Manufacturer: MOOG
- EAN number: 5010874765832
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Right, Front Axle
- paired article number: G6-085
- Vehicle Equipment: for vehicles with power steering
- Item number: G6-084
- Manufacturer: OPTIMAL
- EAN number: 4031185960847
- Condition: New
price incl. 19% VAT
- 1
- 2
- 3
- 4