AUDI Coupe B3 (89, 8B) S2 2.2 quattro Suspension arm (220 hp Petrol 3B)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- Length [mm]: 265
- Inner Diameter [mm]: 10,2
- Item number: 273C0705
- Manufacturer: RIDEX
- EAN number: 4059191694167
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 265
- Required quantity: 1
- Weight [kg]: 2,342
- Item number: 273C0714
- Manufacturer: RIDEX
- EAN number: 4059191703777
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Left, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 10,2
- Bolt Head Diameter [mm]: 19
- Mounting Type: Pre-assembled
- Item number: 273C0278
- Manufacturer: RIDEX
- EAN number: 4059191206209
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Right, Lower, Front Axle
- Item number: 273C0433
- Manufacturer: RIDEX
- EAN number: 4059191204946
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with ball joint, with lock screw set, with coupling rod
- Steering: with tie rod ends
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Required quantity: 1
- Control / Trailing Arm Type: Control Arm
- Item number: 772S0260
- Manufacturer: RIDEX
- EAN number: 4064138172202
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 265
- Required quantity: 1
- Item number: SKCA-0050712
- Manufacturer: STARK
- EAN number: 4059191441945
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: 49400662
- Item number: 49400533
- Manufacturer: CORTECO
- EAN number: 3358960651525
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- Length [mm]: 265
- Inner Diameter [mm]: 10,2
- Item number: SKCA-0050703
- Manufacturer: STARK
- EAN number: 4059191421022
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Left, Lower
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 10,2
- Bolt Head Diameter [mm]: 19
- Mounting Type: Pre-assembled
- Item number: SKCA-0050276
- Manufacturer: STARK
- EAN number: 4059191072958
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Right, outer, Lower
- Braking / Drive Dynamics: for vehicles with ABS
- Brakes- / Drive Dynamics Articles: for ABS
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 19
- Length [mm]: 265
- paired article number: 210025
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,117
- as standard
- Item number: 210024
- Manufacturer: A.B.S.
- EAN number: 8717109310009
- Condition: New
Important: Observe Fitting Instructions
-
- Fitting Position: Front Axle Left, outer, Lower
- Braking / Drive Dynamics: for vehicles with ABS
- Brakes- / Drive Dynamics Articles: for ABS
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 19
- Length [mm]: 265
- paired article number: 210024
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,116
- as standard
- Item number: 210025
- Manufacturer: A.B.S.
- EAN number: 8717109310016
- Condition: New
Important: Observe Fitting Instructions
-
- Fitting Position: Front Axle Left, outer
- Construction Year from: 08 / 1991
- paired article number: TC1142
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Left, Lower
- Length [mm]: 393
- paired article number: TC1142
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 366
- Item number: TC1141
- Manufacturer: DELPHI
- EAN number: 5012759251232
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Vehicle Identification Number (VIN) from: 8B-L-003-792
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Front Axle Left
- paired article number: V10-7119
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 36
- Packaging height [cm]: 6
- Packaging Depth [cm]: 34
- Item number: V10-7118
- Manufacturer: VAICO
- EAN number: 4046001264917
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Front Axle Left, Lower
- Construction Year from: 08 / 1991
- Control / Trailing Arm Type: Control Arm
- paired article number: 5014731
- Net weight [kg]: 2,07
- Item number: 5014730
- Manufacturer: NK
- EAN number: 5703858600679
- Condition: New
-
- Fitting Position: Front Axle Right, Lower
- Construction Year from: 08 / 1991
- Control / Trailing Arm Type: Control Arm
- paired article number: 5014730
- Net weight [kg]: 2,07
- Item number: 5014731
- Manufacturer: NK
- EAN number: 5703858600686
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Vehicle Identification Number (VIN) from: 8B-N-000001
- Diameter [mm]: 44
- Fitting Position: Front Axle, Left, outer
- paired article number: JTC118
- Inner Diameter [mm]: 10
- Item number: JTC117
- Manufacturer: TRW
- EAN number: 3322937899401
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Right, Lower, Front Axle
- Item number: SKCA-0050431
- Manufacturer: STARK
- EAN number: 4059191078318
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Right, outer
- Construction Year from: 08 / 1991
- paired article number: TC1141
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Right, Lower
- Length [mm]: 393
- paired article number: TC1141
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 366
- Item number: TC1142
- Manufacturer: DELPHI
- EAN number: 5012759251249
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Quality
- Fitting Position: Lower, Front Axle Left
- paired article number: 116 050 0155 / HD
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 1
- Replace in pairs only
- Item number: 116 050 0154/HD
- Manufacturer: MEYLE
- EAN number: 4040074349502
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 4-year warranty on all MEYLE-HD parts. deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Quality
- Fitting Position: Lower, Front Axle Right
- paired article number: 116 050 0154 / HD
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 1
- Replace in pairs only
- Item number: 116 050 0155/HD
- Manufacturer: MEYLE
- EAN number: 4040074349489
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 4-year warranty on all MEYLE-HD parts. deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
- 1
- 2
- 3
- 4
- 5