Vehicle identification number: 1860AAG
Audi Q3 8u RS performance 2.5 quattro Suspension arm (367 hp Petrol CZGB)
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear Axle Left, in front of axle, outer, Lower
- Length [mm]: 298
- Item number: 90Z9011-OYO
- Manufacturer: Oyodo
- EAN number: 226984207914032079140
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Lower, Right Front
- Length [mm]: 298
- Diameter 1 [mm]: 14,2
- Diameter 2 [mm]: 12,1
- Item number: 90Z9012-OYO
- Manufacturer: Oyodo
- EAN number: 226984207914042079140
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right
- Item number: 1150200280
- Manufacturer: JP GROUP
- EAN number: 5710412088187
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 5,9
- Packaging height [cm]: 4,4
- Packaging Depth [cm]: 36
- Item number: V10-2321
- Manufacturer: VAICO
- EAN number: 4046001561092
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Lower, Front
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 1,02
- Item number: 22-WA-11
- Manufacturer: MOTOTECHNIKA
- EAN number: 22-WA-11
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Lower, Front
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 1,02
- Item number: 22-WA-12
- Manufacturer: MOTOTECHNIKA
- EAN number: 22-WA-12
- Condition: New
-
- Fitting Position: Rear Axle both sides, Lower, Front
- Required quantity: 2
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 297,8
- paired article number: VKDS 421017
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Bore Diameter [mm]: 14,3
- Item number: VKDS 421017
- Manufacturer: SKF
- EAN number: 7316577891723
- Condition: New
- Fitting Position: Rear Axle Left, Lower
- Length [mm]: 298
- paired article number: 63569
- Rod / Strut: Push Rod
- Item number: 63568
- Manufacturer: SIDEM
- EAN number: 5413978184781
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Front Axle, Left
- paired article number: 72-1100, 35465 01
- Item number: 72-1099
- Manufacturer: MAXGEAR
- EAN number: 5907558515282
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Lower, Left
- Length [mm]: 298
- paired article number: JTC1399
- Diameter 1 [mm]: 14,2
- Diameter 2 [mm]: 12,1
- Item number: JTC1400
- Manufacturer: TRW
- EAN number: 3322937990603
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Length [mm]: 298
- Inner Diameter [mm]: 14
- Item number: 82844AL
- Manufacturer: ALTE AUTOMOTIVE
- EAN number: 225627216155852161558
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower, Rear Axle Right, Rear Axle Left
- Item number: 49398599
- Manufacturer: CORTECO
- EAN number: 3358960632166
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Lower, Right
- Length [mm]: 298
- paired article number: JTC1400
- Diameter 1 [mm]: 14,2
- Diameter 2 [mm]: 12,1
- Item number: JTC1399
- Manufacturer: TRW
- EAN number: 3322937990597
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Lower
- Length [mm]: 297
- paired article number: 9050344
- Item number: 9050343
- Manufacturer: KAMOKA
- EAN number: 2238190503430
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right, Lower
- Length [mm]: 297
- paired article number: 9050343
- Item number: 9050344
- Manufacturer: KAMOKA
- EAN number: 2238115833377
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left
- Item number: 1150200270
- Manufacturer: JP GROUP
- EAN number: 5710412088170
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Steel
- Fitting Position: Rear Axle Right, outer
- Length [mm]: 298
- paired article number: 260346
- Weight [kg]: 1
- Item number: 260347
- Manufacturer: A.B.S.
- EAN number: 8717109346312
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Lower, Front
- paired article number: 32957
- Weight [kg]: 1,02
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 32956
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816329565
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle Left, Lower
- Length [mm]: 298
- paired article number: 116 035 0003
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 1
- Rod / Strut: Guide Rod
- replacement in pairs recommended
- Item number: 116 035 0002
- Manufacturer: MEYLE
- EAN number: 4040074359228
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Lower, Front
- paired article number: 30 93 2957
- Weight [kg]: 1,02
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 30 93 2956
- Manufacturer: SWAG
- EAN number: 4044688562111
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- 1
- 2
- 3
- 4
- 5