Bentley Continental 3W 6.0 FLEX Suspension arm (590 hp Petrol/Ethanol DBDA)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Item number: 273C1520
- Manufacturer: RIDEX
- EAN number: 4059191871650
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: Front Axle Right
- Thread Size: M14x1.5
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Bag
- Item number: 273C0679
- Manufacturer: RIDEX
- EAN number: 4059191458875
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Item number: 301181324200
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063858739
- Condition: New
-
- Fitting Position: Front Axle Left, Upper, Front
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- paired article number: 821 0689 10
- Item number: 821 0684 10
- Manufacturer: FAG
- EAN number: 4014870415686
- Condition: New
-
- Fitting Position: Front Axle Right, Upper, Front
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- paired article number: 821 0684 10
- Item number: 821 0689 10
- Manufacturer: FAG
- EAN number: 4014870415709
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 18,5
- Fitting Position: Front Axle Right
- Thread Size: M14x1.5
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Bag
- Item number: SKCA-0050677
- Manufacturer: STARK
- EAN number: 4059191412747
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left, Lower, Rear
- paired article number: AU-TC-5064
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 48,5
- Packaging width [cm]: 14
- Packaging height [cm]: 11
- Item number: AU-TC-5063
- Manufacturer: MOOG
- EAN number: 4044197461660
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, Rear
- paired article number: AU-TC-5063
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 48,5
- Packaging width [cm]: 14
- Packaging height [cm]: 11
- Item number: AU-TC-5064
- Manufacturer: MOOG
- EAN number: 4044197461677
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear, Right, Lower Front Axle
- paired article number: V10-0690
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Item number: V10-0691
- Manufacturer: VAICO
- EAN number: 4046001360541
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear, Left, Lower Front Axle
- paired article number: V10-0691
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Item number: V10-0690
- Manufacturer: VAICO
- EAN number: 4046001360534
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Lower, inner
- Control / Trailing Arm Type: Control Arm
-
- Fitting Position: Front Axle Left
- Item number: S060032
- Manufacturer: GSP
- EAN number: 6920780813932
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left, Lower, Rear
- paired article number: L29J40
- Required quantity: 1
- Weight [kg]: 2,314
- Packaging length [cm]: 50
- Packaging width [cm]: 13,5
- Packaging height [cm]: 11
- Item number: L29J41
- Manufacturer: MONROE
- EAN number: 5412096789786
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right, Rear Axle Left
- Length [mm]: 283
- Thread Size: M12x1,5
- Pipe Diameter [mm]: 16
- Supplementary Article / Supplementary Info: with accessories
- Item number: JTC1142
- Manufacturer: TRW
- EAN number: 3322937535057
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18,5
- Fitting Position: Front Axle Left, Lower, Rear
- Length [mm]: 402
- paired article number: 821 1220 10
- Thread Size: M14x1,5
- Item number: 821 1219 10
- Manufacturer: FAG
- EAN number: 4014870642334
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18,5
- Fitting Position: Front Axle Right, Lower, Rear
- Length [mm]: 402
- paired article number: 821 1219 10
- Thread Size: M14x1,5
- Item number: 821 1220 10
- Manufacturer: FAG
- EAN number: 4014870642327
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides
- Supplementary Article / Supplementary Info: with accessories
- Item number: 27084 02
- Manufacturer: 尝贰惭贵脰搁顿贰搁
- EAN number: 4047437093300
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Rear, both sides
- Length [mm]: 282
- External Thread [mm]: M12 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Registration Type: T脺V庐 / GS approved
- Item number: G5-849
- Manufacturer: OPTIMAL
- EAN number: 4031185340168
- Condition: New
T脺V CERTIFIED
price incl. 19% VAT
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, outer, Centre, behind the axle
- Item number: SCA-11356
- Manufacturer: KAVO PARTS
- EAN number: 2220123296111
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right
- Weight [kg]: 0,72
- Item number: 26-23465
- Manufacturer: DYS
- EAN number: 8435457146124
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, outer, Centre, Rear, Left, Right
- Length [mm]: 340
- Height [mm]: 12
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 52
- Item number: TC3086
- Manufacturer: DELPHI
- EAN number: 5012759537671
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2