Vehicle identification number: 1004531
Chrysler Voyager rg 2.4 Suspension arm (147 hp Petrol EDZ)
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 13,4
- Fitting Position: Front Axle Right, Lower
- paired article number: 41067B-PCS-MS
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with nut, with ball joint
- Net weight [kg]: 5,2
- Gross Weight [kg]: 5,2
- Item number: 41068B-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4251729683531
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower Front Axle, Left, Lower, Front Axle Left
- paired article number: V33-0059
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Item number: V33-0060
- Manufacturer: VAICO
- EAN number: 4046001704840
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 41068
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- Weight [kg]: 5,0
- Supplementary Article / Supplementary Info: with lock nut
- Observe service information
- Item number: 41067
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816410676
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 41067
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- Weight [kg]: 5,0
- Supplementary Article / Supplementary Info: with lock nut
- Observe service information
- Item number: 41068
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816410683
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: ADA108628
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Weight [kg]: 5,0
- Supplementary Article / Supplementary Info: with lock nut
- Item number: ADA108629
- Manufacturer: BLUE PRINT
- EAN number: 5050063078251
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right
- paired article number: 44-16 050 0009
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 44-16 050 0008
- Manufacturer: MEYLE
- EAN number: 4040074121047
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Left
- paired article number: 44-16 050 0008
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 44-16 050 0009
- Manufacturer: MEYLE
- EAN number: 4040074121054
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: ADA108629
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- Weight [kg]: 4,950
- Item number: ADA108628
- Manufacturer: BLUE PRINT
- EAN number: 5050063078244
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Fitting Position: Front Axle Left
- Construction Year from: 04 / 2001
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 13,5
- Length [mm]: 370
- paired article number: QSA2261S
- Thread Size: M12x1,25
- Width [mm]: 103
- Item number: QSA2260S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438123548
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 13,4
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 309
- paired article number: 210905
- Thread Size: M12X1,25 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 4,901
- as standard
- Item number: 210906
- Manufacturer: A.B.S.
- EAN number: 8717109369267
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- External Thread 2 [mm]: M12x1,5
- Weight [kg]: 5,05
- Item number: 96-10997-1
- Manufacturer: RTS
- EAN number: 20107203573093357309
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 62
- Fitting Position: Left Front
- Overall Height [mm]: 96
- External Thread [mm]: 12X1,25
- Inner Diameter [mm]: 14,5
- Fitted Diameter [mm]: 14
- Item number: 72C15L
- Manufacturer: JAPKO
- EAN number: 8033001853711
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 62
- Fitting Position: Right Front
- Overall Height [mm]: 97
- External Thread [mm]: 12X1,25
- Inner Diameter [mm]: 14
- Fitted Diameter [mm]: 14
- Item number: 72C15R
- Manufacturer: JAPKO
- EAN number: 8033001853742
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- External Thread 2 [mm]: M12x1,5
- Weight [kg]: 5,05
- Item number: 96-10997-2
- Manufacturer: RTS
- EAN number: 20107203573094357309
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 62
- Fitting Position: Left Front
- Overall Height [mm]: 96
- External Thread [mm]: 12X1,25
- Inner Diameter [mm]: 14,5
- Fitted Diameter [mm]: 14
- Item number: 72-0C-C15L
- Manufacturer: ASHIKA
- EAN number: 8033001853704
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Diameter [mm]: 62
- Fitting Position: Right Front
- Overall Height [mm]: 97
- External Thread [mm]: 12X1,25
- Inner Diameter [mm]: 14
- Fitted Diameter [mm]: 14
- Item number: 72-0C-C15R
- Manufacturer: ASHIKA
- EAN number: 8033001853735
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 13,5
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 309
- paired article number: 83501AL
- Thread Size: M12 x 1,25
- Inner Diameter [mm]: 14, 18
- Item number: 83502AL
- Manufacturer: ALTE AUTOMOTIVE
- EAN number: 225627220969402209694
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 13,5
- Fitting Position: Front Axle Left
- paired article number: 91075
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 91074
- Manufacturer: SIDEM
- EAN number: 5413978171057
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 13,5
- Fitting Position: Front Axle Right
- paired article number: 91074
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 91075
- Manufacturer: SIDEM
- EAN number: 5413978171064
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left
- paired article number: 821 0616 10
- Item number: 821 0615 10
- Manufacturer: FAG
- EAN number: 4014870425128
- Condition: New
- 1
- 2
- 3
- 4
- 5