Chrysler Voyager rg 3.8 Suspension arm (218 hp Petrol EGH)
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 13,5
- Fitting Position: Right, Lower, Front Axle
- Thread Size: M12x1.25
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with nut
- Packing Type: Bag
- Item number: 273C0636
- Manufacturer: RIDEX
- EAN number: 4059191677504
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 13,5
- Fitting Position: Lower Front Axle, Left, Front Axle Left
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- External Thread [mm]: M12X1.25
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with nut
- Supplementary Article / Supplementary Info: with accessories
- Item number: 273C0667
- Manufacturer: RIDEX
- EAN number: 4059191692002
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 13,5
- Fitting Position: Lower Front Axle, Left, Front Axle Left
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- External Thread [mm]: M12X1.25
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with nut
- Supplementary Article / Supplementary Info: with accessories
- Item number: SKCA-0050665
- Manufacturer: STARK
- EAN number: 4059191412624
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left
- Thread Size 1: M12
- Item number: RH04-6016
- Manufacturer: REINHOCH
- EAN number: 5901655169607
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right
- Thread Size 1: M12
- Item number: RH04-6017
- Manufacturer: REINHOCH
- EAN number: 5901655169614
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle, Left
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: 66.13.701
- Manufacturer: STARLINE
- EAN number: 221136210087311100873
- Condition: New
-
- Fitting Position: Front Axle Right
- Construction Year to: 03 / 2001
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Length [mm]: 443
- paired article number: QSA2004S
- Width [mm]: 81
- Item number: QSA2005S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593834835
- Condition: New
-
- Fitting Position: Front Axle Left
- Construction Year to: 03 / 2001
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Length [mm]: 443
- paired article number: QSA2005S
- Width [mm]: 81
- Item number: QSA2004S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593834828
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right
- paired article number: 69SKV139
- Weight [kg]: 5,2
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV140
- Manufacturer: ESEN SKV
- EAN number: 5903968488239
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: 49395466
- Item number: 49395465
- Manufacturer: CORTECO
- EAN number: 3358960546050
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: 49395465
- Item number: 49395466
- Manufacturer: CORTECO
- EAN number: 3358960546067
- Condition: New
-
- Vehicle type: RG
- Fitting Position: Lower, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 328903 B
- Thread Size 1: M12 x 1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 328902 B
- Manufacturer: SKF
- EAN number: 7316579255073
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle type: RG
- Fitting Position: Lower, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 328902 B
- Thread Size 1: M12 x 1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 328903 B
- Manufacturer: SKF
- EAN number: 7316579255080
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower Front Axle, Right, Lower, Front Axle Right
- paired article number: V33-0060
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Item number: V33-0059
- Manufacturer: VAICO
- EAN number: 4046001704666
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left, Lower
- paired article number: CH-WP-2450
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: CH-WP-2449
- Manufacturer: MOOG
- EAN number: 4044197317059
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Lower
- paired article number: CH-WP-2449
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: CH-WP-2450
- Manufacturer: MOOG
- EAN number: 4044197317066
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 435
- Height [mm]: 110
- paired article number: TC2219
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 380
- Item number: TC2218
- Manufacturer: DELPHI
- EAN number: 5012759451076
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 435
- Height [mm]: 110
- paired article number: TC2218
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 380
- Item number: TC2219
- Manufacturer: DELPHI
- EAN number: 5012759451083
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower Front Axle, Left, Lower, Front Axle Left
- paired article number: V33-0059
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Item number: V33-0060
- Manufacturer: VAICO
- EAN number: 4046001704840
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right
- paired article number: 44-16 050 0009
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 44-16 050 0008
- Manufacturer: MEYLE
- EAN number: 4040074121047
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5