Vehicle identification number: 3001ASD
Citroen C3 SX 1.6 BlueHDi Suspension arm (75 hp Diesel BHW (DV6FE))
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Front Axle Left
- paired article number: KSC4164
- Item number: KSC4165
- Manufacturer: KYB
- EAN number: 2285227862840
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Left
- paired article number: V22-9520
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 30
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 51
- Item number: V22-9521
- Manufacturer: VAICO
- EAN number: 4046001521232
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Right
- paired article number: JTC1234
- Wheel Hub Diameter [mm]: 82
- Item number: JTC1235
- Manufacturer: TRW
- EAN number: 3322937880157
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 29142
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,450
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Stabiliser Diameter [mm]: 21
- Item number: 29143
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816291435
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Fitting Position: Front Axle Left
- Vehicle configuration line / variant: SUSP. TYPE 3 (+)
- Control / Trailing Arm Type: Control Arm
- paired article number: PE-WP-4742
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: PE-WP-4741
- Manufacturer: MOOG
- EAN number: 4044197405244
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Steering Knuckle Diameter [mm]: 82
- for DAM number from: 14982VH
- Equipment Code: SUSP. TYPE 3 (+)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Left
- paired article number: 11-16 050 0052
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 11-16 050 0053
- Manufacturer: MEYLE
- EAN number: 4040074536988
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left
- paired article number: 53275
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 53274
- Manufacturer: SIDEM
- EAN number: 5413978196937
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right
- paired article number: ZWD-PE-008
- Fabrication Number: ZWD-PE-009
- Item number: ZWD-PE-009
- Manufacturer: NTY
- EAN number: 5902048043580
- Condition: New
-
- Fitting Position: Front Axle Left, outer, Lower
- Vehicle configuration line / variant: SUSP. TYPE 3 (+)
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Length [mm]: 331
- paired article number: 211057
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,199
- as standard
- Item number: 211056
- Manufacturer: A.B.S.
- EAN number: 8717109546248
- Condition: New
Important: Observe Fitting Instructions
-
- Fitting Position: Front Axle Left, outer, Lower
- Suspension: for vehicles with heavy duty suspension, for vehicles with increased ground clearance
- Vehicle configuration line / variant: SUSP. TYPE 1 / 2 (+)
- Control / Trailing Arm Type: Control Arm
- paired article number: SCA-10180
- Item number: SCA-10179
- Manufacturer: KAVO PARTS
- EAN number: 2220122290385
- Condition: New
-
- Fitting Position: Front Axle Right, outer, Lower
- Suspension: for vehicles with heavy duty suspension, for vehicles with increased ground clearance
- Vehicle configuration line / variant: SUSP. TYPE 1 / 2 (+)
- Control / Trailing Arm Type: Control Arm
- paired article number: SCA-10179
- Item number: SCA-10180
- Manufacturer: KAVO PARTS
- EAN number: 2220122290386
- Condition: New
-
- Fitting Position: Front Axle Right
- Vehicle configuration line / variant: SUSP. TYPE 3 (+)
- Control / Trailing Arm Type: Control Arm
- paired article number: PE-WP-4741
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: PE-WP-4742
- Manufacturer: MOOG
- EAN number: 4044197405251
- Condition: New
-
- Fitting Position: Front Axle Left, Lower
- Shock Absorber System: Normal Suspension
- Vehicle configuration line / variant: SUSP. TYPE 1, 2 (+), SUSP. TYPE 1 / 2 (+)
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: 5013754
- Net weight [kg]: 3,32
- Item number: 5013753
- Manufacturer: NK
- EAN number: 5703858899691
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left, Lower
- Length [mm]: 414
- paired article number: QSA2331S
- Width [mm]: 83
- Item number: QSA2330S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438131437
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right, Lower
- Length [mm]: 414
- paired article number: QSA2330S
- Width [mm]: 83
- Item number: QSA2331S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438131444
- Condition: New
Sample photo only
-
- Suspension: for vehicles with heavy duty suspension, for vehicles with increased ground clearance
- Wheel Hub Diameter [mm]: 72, 82
- Parameter: 2
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, outer
- paired article number: JTC3937
- Item number: JTC3936
- Manufacturer: TRW
- EAN number: 3322938529895
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Front Axle, outer, Right, Lower
- paired article number: ZWD-CT-022
- Joint Diameter [mm]: 18
- Fabrication Number: ZWD-CT-023
- Item number: ZWD-CT-023
- Manufacturer: NTY
- EAN number: 590204888336
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle Left
- paired article number: 40-00394
- Weight [kg]: 3,37
- Item number: 40-00395
- Manufacturer: TALOSA
- EAN number: 8435229543793
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Front Axle Right
- paired article number: V22-9521
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 30
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 51
- Item number: V22-9520
- Manufacturer: VAICO
- EAN number: 4046001521225
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Front Axle Left, outer, Lower
- Construction Year to: 05 / 2018
- Vehicle configuration line / variant: SUSP. TYPE 3 (+)
- Control / Trailing Arm Type: Control Arm
- Item number: JTAPS-006L
- Manufacturer: AISIN
- EAN number: 5411450761727
- Condition: New
- 1
- 2
- 3
- 4
- 5