Fiat Marea 185 1.6 Suspension arm (103 hp Petrol 182 B6.000)
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Cone Size [mm]: 17
- Fitting Position: Right
- Item number: RH04-1015
- Manufacturer: REINHOCH
- EAN number: 5901655169867
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: G40.3489 / C
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Base body material: Cast Iron
- Net weight [kg]: 3,51
- Item number: G40.3488/C
- Manufacturer: OMG SRL
- EAN number: 5904100806355
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: G40.3488 / C
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Base body material: Cast Iron
- Net weight [kg]: 3,51
- Item number: G40.3489/C
- Manufacturer: OMG SRL
- EAN number: 5904100806362
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower Front Axle, Left, outer, Front Axle Left
- paired article number: V24-7109
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 8,3
- Packaging height [cm]: 32,1
- Packaging Depth [cm]: 41,2
- Item number: V24-7108
- Manufacturer: VAICO
- EAN number: 4046001367816
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Fitting Position: Front Axle, Left, Lower
- paired article number: AL-WP-7526
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 46,5
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8
- Item number: AL-WP-7527
- Manufacturer: MOOG
- EAN number: 5010874765672
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Fitting Position: Lower Front Axle, outer, Front Axle, Left
- paired article number: FT15013
- Supplementary Article / Supplementary Info Info 2: with bolts
- Item number: FT15012
- Manufacturer: FAST
- EAN number: 224938112469771124697
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Fitting Position: Lower Front Axle, outer, Front Axle, Right
- paired article number: FT15012
- Supplementary Article / Supplementary Info Info 2: with bolts
- Item number: FT15013
- Manufacturer: FAST
- EAN number: 224938112469781124697
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 12559
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,0
- Supplementary Article / Supplementary Info: with holders, with rubber mounts, with holder
- Observe service information
- Item number: 12558
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816125587
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left
- paired article number: 821 0379 10
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Bolt Head Diameter [mm]: 17,00
- Item number: 821 0378 10
- Manufacturer: FAG
- EAN number: 4014870414184
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right
- paired article number: 821 0378 10
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Bolt Head Diameter [mm]: 17,00
- Item number: 821 0379 10
- Manufacturer: FAG
- EAN number: 4014870421618
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Left
- paired article number: VKDS 322002 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322003 B
- Manufacturer: SKF
- EAN number: 7316577895455
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 12558
- Weight [kg]: 3,0
- for OE number: 46474556
- Supplementary Article / Supplementary Info: with rubber mounts, with holders
- Observe service information
- Item number: 12559
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816125594
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- paired article number: VKDS 322003 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322002 B
- Manufacturer: SKF
- EAN number: 7316577895479
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 72-0851
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- for OE number: 46474556
- Supplementary Article / Supplementary Info: with holder
- Item number: 72-0850
- Manufacturer: MAXGEAR
- EAN number: 5907558515947
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 72-0850
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- for OE number: 46474557
- Supplementary Article / Supplementary Info: with holder
- Item number: 72-0851
- Manufacturer: MAXGEAR
- EAN number: 5907558515954
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Front Axle, outer, Right, Lower
- paired article number: ZWD-FT-017
- Fabrication Number: ZWD-FT-016
- Item number: ZWD-FT-016
- Manufacturer: NTY
- EAN number: 5902048914309
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Front Axle, outer, Left, Lower
- paired article number: ZWD-FT-016
- Fabrication Number: ZWD-FT-017
- Item number: ZWD-FT-017
- Manufacturer: NTY
- EAN number: 5902048914293
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: 5011002
- Net weight [kg]: 3,86
- Item number: 5011001
- Manufacturer: NK
- EAN number: 5703858458072
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: 5011001
- Net weight [kg]: 3,85
- Item number: 5011002
- Manufacturer: NK
- EAN number: 5703858458089
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: M-S1008
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Item number: M-S0630
- Manufacturer: MERTZ
- EAN number: 5902701006198
- Condition: New
- 1
- 2
- 3
- 4
- 5