Fiat Palio Weekend 1.6 16V Suspension arm (92 hp Petrol 178 C7.098)
-
- Fitting Position: Front Axle, Left, outer, Lower
- Construction Year to: 12 / 2001
- Vehicle Equipment: for vehicles without power steering
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 13,2
- Length [mm]: 314
- paired article number: 210162
- Thread Size: M12X1,25 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,324
- as standard
- Item number: 210161
- Manufacturer: A.B.S.
- EAN number: 8717109311372
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: 178 D2.011
- Construction Year from: 01 / 2002
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Right
- paired article number: V24-0034
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 30
- Packaging height [cm]: 9
- Packaging Depth [cm]: 60
- Item number: V24-0035
- Manufacturer: VAICO
- EAN number: 4046001394799
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- TecDoc Engine Number: 178 D2.011
- Construction Year to: 01 / 2002
- Vehicle Equipment: for vehicles with power steering
-
- TecDoc Engine Number: 178 C7.098
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- paired article number: V24-9594
- Colour: black
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 16
- Packaging height [cm]: 9
- Packaging Depth [cm]: 59
- Item number: V24-9595
- Manufacturer: VAICO
- EAN number: 4046001401763
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Lower Front Axle
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle, Right
- paired article number: FT15020
- Supplementary Article / Supplementary Info Info 2: with bolts
- Item number: FT15019
- Manufacturer: FAST
- EAN number: 224938112469791124697
- Condition: New
-
- Fitting Position: Lower Front Axle
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle, Left
- paired article number: FT15019
- Supplementary Article / Supplementary Info Info 2: with bolts
- Item number: FT15020
- Manufacturer: FAST
- EAN number: 224938112469801124698
- Condition: New
-
- Vehicle Equipment: for vehicles without power steering
- Construction Year from: 10 / 1999
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Left
- Item number: 49398777
- Manufacturer: CORTECO
- EAN number: 3358960633941
- Condition: New
-
- Vehicle Equipment: for vehicles without power steering
- Construction Year from: 10 / 1999
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Right
- Item number: 49398830
- Manufacturer: CORTECO
- EAN number: 2214012847962
- Condition: New
-
- TecDoc Engine Number: 178 D2.011
- Construction Year to: 01 / 2002
- Vehicle Equipment: for vehicles with power steering
-
- TecDoc Engine Number: 178 C7.098
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 12540
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,200
- Supplementary Article / Supplementary Info: with lock nut, with rubber mounts, with holder
- Observe service information
- Item number: 12539
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816125396
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- TecDoc Engine Number: 178 D2.011
- Construction Year to: 01 / 2002
- Vehicle Equipment: for vehicles with power steering
-
- TecDoc Engine Number: 178 C7.098
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 13,5
- Fitting Position: Front Axle Right, Lower
- paired article number: 12539
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,200
- Supplementary Article / Supplementary Info: with rubber mounts, with holder, with lock nut
- Observe service information
- Item number: 12540
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816125402
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Construction Year to: 12 / 2001
- Fitting Position: Front Axle Right, Lower
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 322507 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322506 B
- Manufacturer: SKF
- EAN number: 7316579298414
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Construction Year from: 09 / 2002
- Fitting Position: Front Axle, Left
- paired article number: 69SKV228
- Weight [kg]: 3,8
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV227
- Manufacturer: ESEN SKV
- EAN number: 5903968497774
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Construction Year from: 09 / 2002
- Fitting Position: Front Axle, Right
- paired article number: 69SKV227
- Weight [kg]: 3,8
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV228
- Manufacturer: ESEN SKV
- EAN number: 5903968497781
- Condition: New
-
- TecDoc Engine Number: 178 D2.011
- Construction Year from: 01 / 2002
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 70 92 1955
- Weight [kg]: 3,850
- Supplementary Article / Supplementary Info: with rubber mounts, with lock nut, with holder
- Item number: 70 92 1953
- Manufacturer: SWAG
- EAN number: 4044688569899
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- TecDoc Engine Number: 178 D2.011
- Construction Year from: 01 / 2002
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 70 92 1953
- Weight [kg]: 3,850
- Supplementary Article / Supplementary Info: with rubber mounts, with holder, with lock nut
- Item number: 70 92 1955
- Manufacturer: SWAG
- EAN number: 4044688569905
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: G40.4069 / C
- Thread Size: M12x1,25
- Thread Size 1: M12x1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Base body material: Steel
- Net weight [kg]: 3,87
- Item number: G40.4068/C
- Manufacturer: OMG SRL
- EAN number: 5904100807932
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: FI-WP-4173
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 64
- Packaging width [cm]: 49,5
- Packaging height [cm]: 14,5
- Item number: FI-WP-4172
- Manufacturer: MOOG
- EAN number: 4044197438082
- Condition: New
-
- TecDoc Engine Number: 178 D2.011
- Construction Year from: 01 / 2002
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 21955
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,850
- Supplementary Article / Supplementary Info: with lock nut, with holder
- Observe service information
- Item number: 21953
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816219538
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Construction Year from: 01 / 2002
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 322058 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322057 B
- Manufacturer: SKF
- EAN number: 7316577896339
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 2001
- Vehicle Equipment: for vehicles without power steering
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 13
- Fitting Position: Left, Lower, Front Axle
- paired article number: FI-WP-2509
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: FI-WP-2519
- Manufacturer: MOOG
- EAN number: 4044197313976
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Lower
- Item number: 18.99.700
- Manufacturer: STARLINE
- EAN number: 22113629092412909241
- Condition: New
- 1
- 2
- 3
- 4
- 5