Siena 1.6 Suspension arm (103 hp Petrol 182 B6.000)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- paired article number: KSC4026
- Item number: KSC4025
- Manufacturer: KYB
- EAN number: 2285227861450
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: KSC4025
- Item number: KSC4026
- Manufacturer: KYB
- EAN number: 2285227861460
- Condition: New
-
- Fitting Position: Front Axle Left, outer
- paired article number: TC2012
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Left, Lower
- Length [mm]: 490
- paired article number: TC2012
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 415
- Item number: TC2011
- Manufacturer: DELPHI
- EAN number: 5012759289617
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Front Axle
- paired article number: V24-9595
- Vehicle Equipment: for vehicles with hydraulic power steering
- Colour: black
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 15
- Packaging height [cm]: 8
- Packaging Depth [cm]: 51
- Item number: V24-9594
- Manufacturer: VAICO
- EAN number: 4046001401756
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Construction Year from: 09 / 2002
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Left
- paired article number: 216 050 0022
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 216 050 0021
- Manufacturer: MEYLE
- EAN number: 4040074475584
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Construction Year from: 09 / 2002
- Material: Sheet Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Right
- paired article number: 216 050 0021
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- replacement in pairs recommended
- Item number: 216 050 0022
- Manufacturer: MEYLE
- EAN number: 4040074475591
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 01 / 2002
- Fitting Position: Lower, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 322058 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322057 B
- Manufacturer: SKF
- EAN number: 7316577896339
- Condition: New
-
- Construction Year from: 01 / 2002
- Fitting Position: Lower, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- paired article number: VKDS 322057 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322058 B
- Manufacturer: SKF
- EAN number: 7316579254274
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Left
- Vehicle Equipment: for vehicles without power steering
- Item number: 49398777
- Manufacturer: CORTECO
- EAN number: 3358960633941
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Right
- Vehicle Equipment: for vehicles without power steering
- Item number: 49398830
- Manufacturer: CORTECO
- EAN number: 2214012847962
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 12540
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,200
- Vehicle Equipment: for vehicles with hydraulic power steering
- Supplementary Article / Supplementary Info: with lock nut, with rubber mounts, with holder
- Observe service information
- Item number: 12539
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816125396
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 13,5
- Fitting Position: Front Axle Right, Lower
- paired article number: 12539
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,200
- Vehicle Equipment: for vehicles with hydraulic power steering
- Supplementary Article / Supplementary Info: with rubber mounts, with holder, with lock nut
- Observe service information
- Item number: 12540
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816125402
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Right
- paired article number: V24-0034
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Model Year from: 2002
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 30
- Packaging height [cm]: 9
- Packaging Depth [cm]: 60
- Item number: V24-0035
- Manufacturer: VAICO
- EAN number: 4046001394799
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- paired article number: V24-9594
- Vehicle Equipment: for vehicles with hydraulic power steering
- Colour: black
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 16
- Packaging height [cm]: 9
- Packaging Depth [cm]: 59
- Item number: V24-9595
- Manufacturer: VAICO
- EAN number: 4046001401763
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 70 92 1955
- Weight [kg]: 3,850
- Supplementary Article / Supplementary Info: with rubber mounts, with lock nut, with holder
- Model Year from: 2002
- Item number: 70 92 1953
- Manufacturer: SWAG
- EAN number: 4044688569899
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: 70 92 1953
- Weight [kg]: 3,850
- Supplementary Article / Supplementary Info: with rubber mounts, with holder, with lock nut
- Model Year from: 2002
- Item number: 70 92 1955
- Manufacturer: SWAG
- EAN number: 4044688569905
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- paired article number: FI-WP-4173
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 64
- Packaging width [cm]: 49,5
- Packaging height [cm]: 14,5
- Item number: FI-WP-4172
- Manufacturer: MOOG
- EAN number: 4044197438082
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: 21955
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,850
- Supplementary Article / Supplementary Info: with lock nut, with holder
- Observe service information
- Model Year from: 2002
- Item number: 21953
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816219538
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Construction Year to: 12 / 2001
- Vehicle Equipment: for vehicles without power steering
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 13
- Fitting Position: Left, Lower, Front Axle
- paired article number: FI-WP-2509
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: FI-WP-2519
- Manufacturer: MOOG
- EAN number: 4044197313976
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 01 / 2002
- Vehicle Equipment: for vehicles with power steering
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 14
- Fitting Position: Front Axle Left
- paired article number: 19171
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 19170
- Manufacturer: SIDEM
- EAN number: 5413978169122
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5