Fiat Tempra 159 1.6 i.e. Suspension arm (87 hp Petrol 159 B9.000)
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Cone Size [mm]: 17
- Fitting Position: Lower Front Axle, Left, Front Axle Left
- paired article number: FT15002
- Supplementary Article / Supplementary Info Info 2: with bolts
- Item number: FT15001
- Manufacturer: FAST
- EAN number: 224938112469671124696
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Cone Size [mm]: 17
- Fitting Position: Lower Front Axle, Front Axle, Right
- paired article number: FT15001
- Supplementary Article / Supplementary Info Info 2: with bolts
- Item number: FT15002
- Manufacturer: FAST
- EAN number: 224938112469681124696
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 17
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- paired article number: V24-7132
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 8,3
- Packaging height [cm]: 32,1
- Packaging Depth [cm]: 39,7
- Item number: V24-7131
- Manufacturer: VAICO
- EAN number: 4046001393785
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 17
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Lower Front Axle
- paired article number: V24-7131
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 8,3
- Packaging height [cm]: 32,1
- Packaging Depth [cm]: 39,7
- Item number: V24-7132
- Manufacturer: VAICO
- EAN number: 4046001393792
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Vehicle Identification Number (VIN) from: 7068091
- Fitting Position: Front Axle, Right
- Item number: 49398881
- Manufacturer: CORTECO
- EAN number: 3358960634986
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- paired article number: VKDS 322025 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322024 B
- Manufacturer: SKF
- EAN number: 7316577896414
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- paired article number: VKDS 322024 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322025 B
- Manufacturer: SKF
- EAN number: 7316577896391
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Left, outer, Lower
- paired article number: TC429
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 380
- Height [mm]: 75
- Width [mm]: 325
- Item number: TC430
- Manufacturer: DELPHI
- EAN number: 5012759858325
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Vehicle Identification Number (VIN) from: 7068091
- Fitting Position: Left, Front Axle
- Item number: 49398939
- Manufacturer: CORTECO
- EAN number: 2214012848055
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 15
- Fitting Position: Front Axle, Right
- paired article number: 26746-PCS-MS
- Quantity per axle: 1
- Net weight [kg]: 3,55
- Gross Weight [kg]: 3,6
- Item number: 26745-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083976884
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 15
- Fitting Position: Front Axle, Left
- paired article number: 26745-PCS-MS
- Quantity per axle: 1
- Net weight [kg]: 3,72
- Gross Weight [kg]: 3,77
- Item number: 26746-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083976679
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Vehicle Identification Number (VIN) from: 7068091
- Cone Size [mm]: 17
- Fitting Position: Front Axle, Right
- Item number: RH04-1011
- Manufacturer: REINHOCH
- EAN number: 5901655169522
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Vehicle Identification Number (VIN) from: 7068091
- Cone Size [mm]: 17
- Fitting Position: Left, Front Axle
- Item number: RH04-1012
- Manufacturer: REINHOCH
- EAN number: 5901655169539
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 17
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 309
- paired article number: 210159
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,603
- as standard
- Item number: 210160
- Manufacturer: A.B.S.
- EAN number: 8717109311365
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 17
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 309
- paired article number: 210160
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,64
- as standard
- Item number: 210159
- Manufacturer: A.B.S.
- EAN number: 8717109311358
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right, Lower
- paired article number: 216 050 7504
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- Machining: Forged
- replacement in pairs recommended
- Item number: 216 050 3118
- Manufacturer: MEYLE
- EAN number: 4040074168820
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Left, Lower
- paired article number: 216 050 3118
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- Machining: Forged
- replacement in pairs recommended
- Item number: 216 050 7504
- Manufacturer: MEYLE
- EAN number: 4040074217009
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Fitting Position: Front Axle, Right, Lower
- paired article number: FI-WP-7504P
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Packing Type: Bag
- Packaging length [cm]: 39,5
- Packaging width [cm]: 32
- Packaging height [cm]: 7,5
- Item number: FI-WP-7503P
- Manufacturer: MOOG
- EAN number: 4044197317622
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Fitting Position: Front Axle Right
- Length [mm]: 390
- paired article number: QSA915S
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Width [mm]: 390
- Item number: QSA914S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593631441
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Fitting Position: Front Axle Left
- Length [mm]: 390
- paired article number: QSA914S
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Width [mm]: 390
- Item number: QSA915S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593631458
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5