Ford Kuga Mk2 2.0 Suspension arm (243 hp Petrol TPWA)
- Control / Trailing Arm Type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Lower
- Length [mm]: 490
- Rod / Strut: Push Rod
- Observe service information
- Item number: 3871
- Manufacturer: SIDEM
- EAN number: 5413978243815
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, Left, Right, Lower
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: FD-TC-15331
- Manufacturer: MOOG
- EAN number: 4060426167455
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Upper
- Item number: LVSA1858
- Manufacturer: MOTAQUIP
- EAN number: 5056462408453
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: both sides, Rear Axle
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 20,5
- Packaging height [cm]: 9
- Packaging Depth [cm]: 55,1
- Item number: V25-1115
- Manufacturer: VAICO
- EAN number: 4046001790775
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Mounting Type: Hydro Mount
- Packing Type: Box
- Item number: 4302184
- Manufacturer: KRAFT
- EAN number: 5901159397902
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 21
- Fitting Position: Front Axle Left
- paired article number: QSA2890S
- Item number: QSA2889S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438487244
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Lower
- Length [mm]: 490
- Rod / Strut: Push Rod
- Observe service information
- Item number: 58409
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978814763
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: FD-WP-15312
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Mounting Type: Hydro Mount
- Packing Type: Box
- Packaging length [cm]: 64
- Packaging width [cm]: 49,5
- Packaging height [cm]: 14,5
- Item number: FD-WP-15311
- Manufacturer: MOOG
- EAN number: 4060426217846
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: FD-WP-15311
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Mounting Type: Hydro Mount
- Packing Type: Box
- Packaging length [cm]: 64
- Packaging width [cm]: 49,5
- Packaging height [cm]: 14,5
- Item number: FD-WP-15312
- Manufacturer: MOOG
- EAN number: 4060426217839
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 21
- Fitting Position: Front Axle Left, Lower, Front Axle, outer, Left
- Fabrication Number: ZWD-FR-017
- Item number: ZWD-FR-017
- Manufacturer: NTY
- EAN number: 5902048889973
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle Left
- paired article number: 20-24185
- Weight [kg]: 5,05
- Item number: 20-24186
- Manufacturer: DYS
- EAN number: 8435229590131
- Condition: New
-
- Fitting Position: Lower
- Control / Trailing Arm Type: Control Arm
-
- Fitting Position: Front Axle Left
- Cone Size [mm]: 21
- Item number: S063190
- Manufacturer: GSP
- EAN number: 6941596181787
- Condition: New
-
- Construction Year from: 11 / 2014
-
- Construction Year to: 10 / 2014
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- paired article number: V25-1110
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41,8
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 50,2
- Item number: V25-1109
- Manufacturer: VAICO
- EAN number: 4046001790737
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Construction Year from: 11 / 2014
-
- Construction Year to: 10 / 2014
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Lower Front Axle
- paired article number: V25-1109
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 40,8
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 50,8
- Item number: V25-1110
- Manufacturer: VAICO
- EAN number: 4046001791451
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 21
- Fitting Position: Front Axle Right
- paired article number: QSA2889S
- Item number: QSA2890S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438487251
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, both sides, Upper
- Length [mm]: 286
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 2
- Mounting Type: Rubber-Metal Mount
- Mounting points diameter [mm]: 12,2
- Item number: G5-2146
- Manufacturer: OPTIMAL
- EAN number: 4058787311228
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, Front Axle, outer, Right
- Fabrication Number: ZWD-FR-018
- Item number: ZWD-FR-018
- Manufacturer: NTY
- EAN number: 5902048889966
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front Axle Right
- paired article number: 20-24186
- Weight [kg]: 5,05
- Item number: 20-24185
- Manufacturer: DYS
- EAN number: 8435229590124
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 21
- Fitting Position: Lower, Front Axle Left
- paired article number: 3873
- Rod / Strut: Push Rod
- only in connection with: Ball joint+HYDRO SB
- Version: with HYDRO SB
- Item number: 3872
- Manufacturer: SIDEM
- EAN number: 5413978243792
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 21
- Fitting Position: Lower, Front Axle Right
- paired article number: 3872
- Rod / Strut: Push Rod
- only in connection with: Ball joint+HYDRO SB
- Version: with HYDRO SB
- Item number: 3873
- Manufacturer: SIDEM
- EAN number: 5413978243808
- Condition: New
- 1
- 2
- 3
- 4