Vehicle identification number: 8566BSH
Ford Transit Custom Van 2.0 EcoBlue mHEV Suspension arm (170 hp Diesel/Electro BLFC)
-
- Fitting Position: Front Axle, Right, outer, Lower
- Vehicle type: Transit Custom 280
-
- Fitting Position: Front Axle Right, outer, Lower, Front Axle, Right
- Suspension: for vehicles with standard suspension
- Vehicle type: Transit Custom 300
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 16,7
- Length [mm]: 408
- paired article number: 211802
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 5,143
- as standard
- Item number: 211803
- Manufacturer: A.B.S.
- EAN number: 8717109675092
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Right, Front Axle
- paired article number: V25-1764
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Item number: V25-1763
- Manufacturer: VAICO
- EAN number: 4046001692321
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Lower, Left, Front Axle
- paired article number: V25-1763
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 45,7
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 53,1
- Item number: V25-1764
- Manufacturer: VAICO
- EAN number: 4046001692338
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, outer, Lower
- paired article number: VKDS 324086
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 324085
- Manufacturer: SKF
- EAN number: 7316581949304
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 20,7
- Fitting Position: Lower, Front Axle Left
- paired article number: 58790
- Vehicle configuration line / variant: 330 / 350 / 390 / 410 / 470
- Rod / Strut: Push Rod
- Item number: 58775
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978819010
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 20,7
- Fitting Position: Lower, Front Axle Right
- paired article number: 58775
- Vehicle configuration line / variant: 330 / 350 / 390 / 410 / 470
- Rod / Strut: Push Rod
- Item number: 58790
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978819027
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 17
- Fitting Position: Lower, Front Axle Right
- paired article number: 58762
- Rod / Strut: Push Rod
- Item number: 58763
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978818808
- Condition: New
-
- Fitting Position: Front Axle Left, Lower
- Manufacturer Restriction: increased payload -
- Tyres: for single tyres
- Control / Trailing Arm Type: Control Arm
- paired article number: L16A11
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Required quantity: 1
- Weight [kg]: 5,817
- Packaging length [cm]: 50
- Packaging width [cm]: 50
- Packaging height [cm]: 8
- Item number: L16A12
- Manufacturer: MONROE
- EAN number: 5412096534881
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- paired article number: S063064
- Item number: S063065
- Manufacturer: GSP
- EAN number: 221066816658585166585
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Left
- paired article number: S063065
- Item number: S063064
- Manufacturer: GSP
- EAN number: 221066816658584166585
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, outer, Lower, Left, Front Axle
- Length [mm]: 450
- paired article number: TC4554
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 450
- Item number: TC4553
- Manufacturer: DELPHI
- EAN number: 5012759620175
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, outer, Lower, Right, Front Axle
- Length [mm]: 450
- paired article number: TC4553
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 450
- Item number: TC4554
- Manufacturer: DELPHI
- EAN number: 5012759620182
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 16,8
- Fitting Position: Front Axle Left
- paired article number: 4473
- Rod / Strut: Push Rod
- Version: 250 / 60 / 70 / 80 / 90 SERI, 300 / 10 / 20 SERIES
- Item number: 4472
- Manufacturer: SIDEM
- EAN number: 5413978284375
- Condition: New
-
- Fitting Position: Front Axle, Left, Lower
- Suspension: for vehicles without heavy duty suspension
- Control / Trailing Arm Type: Triangular Control Arm (CV)
- paired article number: LVSA1955
- Item number: LVSA1954
- Manufacturer: MOTAQUIP
- EAN number: 5056462408873
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 16,8
- Fitting Position: Front Axle Left
- paired article number: 45921
- Rod / Strut: Push Rod
- Version: 250 / 60 / 70 / 80 / 90 SERI, 300 / 10 / 20 SERIES
- Item number: 45920
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978284689
- Condition: New
-
- Vehicle type: Transit Custom 280
- Fitting Position: outer, Front Axle Right, Lower
-
- Vehicle type: Transit Custom 320
- Fitting Position: outer, Front Axle Right, Lower
-
- Vehicle type: Transit Custom 300
- Fitting Position: outer, Front Axle Right, Lower
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 21,4, 16,9
- Length [mm]: 439
- paired article number: 8500 165078
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 1
- Article number of recommended accessories: 8500 16415
- Item number: 8500 165077
- Manufacturer: TRISCAN
- EAN number: 5710476400833
- Condition: New
"See accessories list for bolt kit, bolts are not included"
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 20,7
- Fitting Position: Front Axle Left
- paired article number: 4471
- Rod / Strut: Push Rod
- Version: 330 / 50 / 90 SERIES, 410 / 70 SERIES
- Item number: 4470
- Manufacturer: SIDEM
- EAN number: 5413978284351
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 20,7
- Fitting Position: Front Axle Right
- paired article number: 4470
- Rod / Strut: Push Rod
- Version: 330 / 50 / 90 SERIES, 410 / 70 SERIES
- Item number: 4471
- Manufacturer: SIDEM
- EAN number: 5413978284368
- Condition: New
-
- Fitting Position: Front Axle, Right, Lower
- Suspension: for vehicles without heavy duty suspension
- Control / Trailing Arm Type: Triangular Control Arm (CV)
- paired article number: LVSA1954
- Item number: LVSA1955
- Manufacturer: MOTAQUIP
- EAN number: 5056462408880
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 20,7
- Fitting Position: Front Axle Left
- paired article number: 45653
- Rod / Strut: Push Rod
- Version: 330 / 50 / 90 SERIES, 410 / 70 SERIES
- Item number: 45652
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978284665
- Condition: New
- 1
- 2
- 3
- 4
- 5