HYUNDAI Sonata VI (YF) 2.0 i Suspension arm (165 hp Petrol G4KD)
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle, both sides
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 34,5
- Packaging width [cm]: 8,5
- Packaging height [cm]: 6,5
- Item number: HY-TC-14736
- Manufacturer: MOOG
- EAN number: 4060426212636
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 13,4
- Fitting Position: in front of axle, Rear Axle, outer
- Length [mm]: 195
- paired article number: 211734
- Thread Size: M10X1,25 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 0,72
- as standard
- Item number: 211734
- Manufacturer: A.B.S.
- EAN number: 8717109653045
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
-
- Model Year from: 2012
- Model Year to: 2013
- Suspension: for vehicles with standard suspension
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Upper, Rear, Rear Axle Left, Rear Axle Right, outer
- Item number: 72-5985
- Manufacturer: MAXGEAR
- EAN number: 5905141906899
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Rear Axle Right, Upper
- Item number: A52-0679
- Manufacturer: ACKOJA
- EAN number: 4062375440818
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear Axle, Upper, both sides
- Weight [kg]: 1,24
- Item number: 26-26397
- Manufacturer: DYS
- EAN number: 8435457164654
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Upper, Rear, Rear Axle Left, Rear Axle Right, outer
- Required quantity: 2
- Production date from: 20.09.2012
- replacement in pairs recommended
- Item number: 37-16 050 0098
- Manufacturer: MEYLE
- EAN number: 4040074312384
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Length [mm]: 442
- Item number: 301181360100
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063730318
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Fitting Position: in front of axle, Front Axle Left, outer, Lower
- Length [mm]: 363
- paired article number: 211697
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 4,692
- as standard
- Item number: 211696
- Manufacturer: A.B.S.
- EAN number: 8717109650624
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Fitting Position: in front of axle, Front Axle Right, outer, Lower
- Length [mm]: 363
- paired article number: 211696
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 4,699
- as standard
- Item number: 211697
- Manufacturer: A.B.S.
- EAN number: 8717109650631
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left, Lower
- paired article number: KI-WP-15392
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: KI-WP-15391
- Manufacturer: MOOG
- EAN number: 4060426217990
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right, Lower
- paired article number: KI-WP-15391
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: KI-WP-15392
- Manufacturer: MOOG
- EAN number: 4060426217983
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower
- Overall Height [mm]: 76
- Fitted Diameter [mm]: 18
- Inner Diameter 2 [mm]: 14, 12
- Item number: 72-0H-H74L
- Manufacturer: ASHIKA
- EAN number: 8052553165707
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower
- Overall Height [mm]: 76
- Fitted Diameter [mm]: 18
- Inner Diameter 2 [mm]: 14, 12
- Item number: 72-0H-H74R
- Manufacturer: ASHIKA
- EAN number: 8052553165738
- Condition: New
-
- Production date from: 20140629
- Production date to: 20150127
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Right, Lower Front Axle
- Weight [kg]: 4,43
- Packaging length [cm]: 43,0
- Packaging width [cm]: 38,0
- Packaging height [cm]: 8,5
- Item number: 1224-E6FRH
- Manufacturer: FEBEST
- EAN number: 4056111172682
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- paired article number: A53-0158
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 4,174
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Item number: A53-0157
- Manufacturer: ACKOJA
- EAN number: 4062375034796
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- paired article number: A53-0157
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 4,174
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Item number: A53-0158
- Manufacturer: ACKOJA
- EAN number: 4062375034802
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right, Lower
- paired article number: J4900335
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Article number of the recommended special tool: J9420000
- Item number: J4910335
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416419202
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Right
- paired article number: 87770
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 87771
- Manufacturer: SIDEM
- EAN number: 5413978244164
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Left
- paired article number: 87771
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 87770
- Manufacturer: SIDEM
- EAN number: 5413978244157
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Lower, Front Axle Left
- paired article number: 58480
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 58479
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978888290
- Condition: New
price incl. 19% VAT
- 1
- 2
- 3
- 4