Vehicle identification number: 1329ADF
Infiniti FX S51 5.0 AWD Suspension arm (390 hp Petrol VK50VE)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Upper, Front Axle, outer, Left
- paired article number: ZWG-NS-015
- Fabrication Number: ZWG-NS-014
- Item number: ZWG-NS-014
- Manufacturer: NTY
- EAN number: 590204889995
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Upper, Front Axle, outer, Right
- paired article number: ZWG-NS-014
- Fabrication Number: ZWG-NS-015
- Item number: ZWG-NS-015
- Manufacturer: NTY
- EAN number: 590204889994
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Item number: J31132YMT
- Manufacturer: YAMATO
- EAN number: 5900427586215
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Right, Lower Front Axle
- Item number: 30Z1111-OYO
- Manufacturer: Oyodo
- EAN number: 226984177746791777467
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Left, Lower Front Axle
- Item number: 30Z1110-OYO
- Manufacturer: Oyodo
- EAN number: 226984177746781777467
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Lower Front Axle, Right
- paired article number: A38-0304
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Item number: A38-0303
- Manufacturer: ACKOJA
- EAN number: 4062375036189
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Left, Lower Front Axle
- paired article number: A38-0303
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging height [cm]: 13,6
- Packaging Depth [cm]: 62,9
- Item number: A38-0304
- Manufacturer: ACKOJA
- EAN number: 4062375034673
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Upper, Front Axle Left
- paired article number: 41573
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 41572
- Manufacturer: SIDEM
- EAN number: 5413978243471
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Upper, Front Axle Right
- paired article number: 41572
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 41573
- Manufacturer: SIDEM
- EAN number: 5413978243488
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Upper, Front Axle Left
- paired article number: 58418
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 58417
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978816644
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Upper, Front Axle Right
- paired article number: 58417
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 58418
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978816651
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left, outer, Lower, Left
- Length [mm]: 476
- Height [mm]: 218
- paired article number: TC7385
- Thread Size 1: M16 x 1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 554
- Item number: TC7384
- Manufacturer: DELPHI
- EAN number: 68960435227
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 16,8
- Fitting Position: Front Axle Left, Front Axle, outer, Left, Lower
- paired article number: ZWD-NS-107
- Fabrication Number: ZWD-NS-106
- Item number: ZWD-NS-106
- Manufacturer: NTY
- EAN number: 5902048887030
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 16,8
- Fitting Position: Front Axle Right, Front Axle, outer, Right, Lower
- paired article number: ZWD-NS-106
- Fabrication Number: ZWD-NS-107
- Item number: ZWD-NS-107
- Manufacturer: NTY
- EAN number: 5902048882127
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Fitting Position: Front Axle Right, outer, Upper
- paired article number: 211698
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 1,12
- as standard
- Item number: 211699
- Manufacturer: A.B.S.
- EAN number: 8717109651119
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- External Thread [mm]: M16 X 1.50
- Fitted Diameter [mm]: 17
- Diameter 1 [mm]: 12
- Diameter 2 [mm]: 14
- Item number: BS-186
- Manufacturer: JAPANPARTS
- EAN number: 8052553868844
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- External Thread [mm]: M16 X 1.50
- Fitted Diameter [mm]: 17
- Diameter 1 [mm]: 12
- Diameter 2 [mm]: 14
- Item number: BS-187
- Manufacturer: JAPANPARTS
- EAN number: 8052553868875
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Upper
- Overall Height [mm]: 64
- Inner Diameter [mm]: 10
- Fitted Diameter [mm]: 16
- Item number: 72159L
- Manufacturer: JAPKO
- EAN number: 8052553057552
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Upper
- Overall Height [mm]: 64
- Inner Diameter [mm]: 10
- Fitted Diameter [mm]: 16
- Item number: 72-01-159L
- Manufacturer: ASHIKA
- EAN number: 8052553057545
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Upper
- Overall Height [mm]: 64
- Inner Diameter [mm]: 10
- Fitted Diameter [mm]: 16
- Item number: 72-01-159R
- Manufacturer: ASHIKA
- EAN number: 8052553057576
- Condition: New
- 1
- 2
- 3