Vehicle identification number: 1590ALE
Land Rover Discovery 5 3.0 P360 MHEV 4x4 Suspension arm (360 hp Petrol/Electric PT306(AJ20P6))
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Steel
- Fitting Position: in front of axle, Rear Axle Right, outer, Lower
- Length [mm]: 310
- paired article number: 211886
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,2
- as standard
- Item number: 211887
- Manufacturer: A.B.S.
- EAN number: 8717109703894
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Left
- paired article number: LR-TC-14862
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 48,5
- Packaging width [cm]: 14
- Packaging height [cm]: 11
- Item number: LR-TC-14861
- Manufacturer: MOOG
- EAN number: 4060426117986
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear Axle Left, Lower
- paired article number: VKDS 42703
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Item number: VKDS 427002
- Manufacturer: SKF
- EAN number: 7316579808415
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear Axle Right, Lower
- paired article number: VKDS 427002
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Item number: VKDS 427003
- Manufacturer: SKF
- EAN number: 7316579808408
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Right, Lower, Front
- paired article number: 182032
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 1,733
- Observe service information
- Item number: 182033
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224820339
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Lower, Front
- paired article number: 182033
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 1,733
- Observe service information
- Item number: 182032
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224820322
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right, outer, Upper
- Length [mm]: 386
- paired article number: 211872
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,607
- as standard
- Item number: 211872
- Manufacturer: A.B.S.
- EAN number: 8717109701739
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle Right
- paired article number: V48-0213
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 7,6
- Packaging height [cm]: 7,3
- Packaging Depth [cm]: 36,2
- Item number: V48-0212
- Manufacturer: VAICO
- EAN number: 4046001807350
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle Right
- paired article number: V48-0212
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 7,6
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 36,3
- Item number: V48-0213
- Manufacturer: VAICO
- EAN number: 4046001807367
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Lower, Front
- paired article number: 33 10 8489
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 1,733
- Item number: 33 10 8488
- Manufacturer: SWAG
- EAN number: 4054228820328
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Lower
- Length [mm]: 310
- paired article number: QSJ3794S
- Item number: QSJ3793S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438475937
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right, Lower
- Length [mm]: 310
- paired article number: QSJ3793S
- Item number: QSJ3794S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438475944
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle, Left
- paired article number: L17557
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 1
- Weight [kg]: 1,827
- Packaging length [cm]: 41
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Item number: L17558
- Manufacturer: MONROE
- EAN number: 5412096548659
- Condition: New
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Steel
- Fitting Position: in front of axle, Rear Axle Left, outer, Lower
- Length [mm]: 310
- paired article number: 211887
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,2
- as standard
- Item number: 211886
- Manufacturer: A.B.S.
- EAN number: 8717109703856
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right, Upper
- Length [mm]: 385
- Required quantity: 2
- Bore Diameter [mm]: 14,2
- replacement in pairs recommended
- Item number: 53-16 050 0053
- Manufacturer: MEYLE
- EAN number: 4040074336366
- Condition: New
price incl. 19% VAT
excl. delivery costs
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Rear Axle Right, Upper
- Length [mm]: 385
- Required quantity: 2
- Inner Diameter [mm]: 14
- Item number: 58193909
- Manufacturer: METZGER
- EAN number: 4062101258274
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Left, Right, Upper
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 47
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: LR-TC-14857
- Manufacturer: MOOG
- EAN number: 4044197988501
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right, Upper
- Weight [kg]: 0,561
- Supplementary Article / Supplementary Info: with rubber-metal mounts
- Observe service information
- Item number: 183112
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224831120
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right, Upper
- Weight [kg]: 0,561
- Supplementary Article / Supplementary Info: with rubber-metal mounts
- Item number: 33 10 8835
- Manufacturer: SWAG
- EAN number: 4054228831126
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Front Axle Left, Lower
- Vehicle Identification Number (VIN) to: HA999999
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 22,4
- Length [mm]: 364
- paired article number: 211879
- Thread Size: M16X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,1
- as standard
- Item number: 211878
- Manufacturer: A.B.S.
- EAN number: 8717109702859
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5