Vehicle identification number: 2143ABC
Range Rover Sport L320 5.0 4x4 Suspension arm (506 hp Petrol 508PS(AJ133))
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Lower, Rear, Right
- Length [mm]: 423,25
- paired article number: RH04-5038
- Item number: RH04-5037
- Manufacturer: REINHOCH
- EAN number: 5901655196726
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- Fitting Position: Upper Front Axle, Upper, Right, Front Axle
- Length [mm]: 423
- paired article number: V48-9527
- Weight [kg]: 4,01
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 7,5
- Packaging height [cm]: 7
- Packaging Depth [cm]: 51
- Item number: V48-9526
- Manufacturer: VAICO
- EAN number: 4046001410123
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18,5
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,2
- Supplementary Article / Supplementary Info: with rubber mounts, with lock nut
- External Thread Size: M14 x 1,5
- Item number: 33 10 0474
- Manufacturer: SWAG
- EAN number: 4054228706066
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Upper Front Axle, Left, Upper, Front Axle
- Length [mm]: 423
- paired article number: V48-9526
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 7
- Packaging height [cm]: 7
- Packaging Depth [cm]: 50
- Item number: V48-9527
- Manufacturer: VAICO
- EAN number: 4046001410130
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear, Lower, Front Axle Left
- paired article number: 48107
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 4,31
- Observe service information
- Item number: 48106
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816481065
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Lower, Front Axle Right, Rear
- paired article number: 48106
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 4,106
- Observe service information
- Item number: 48107
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816481072
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Lower, Rear, Left
- Length [mm]: 423
- paired article number: 72-5250
- Item number: 72-5249
- Manufacturer: MAXGEAR
- EAN number: 5903766310947
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Lower, Rear, Right
- Length [mm]: 423
- paired article number: 72-5249
- Item number: 72-5250
- Manufacturer: MAXGEAR
- EAN number: 5903766310954
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Lower, Rear, Left
- Length [mm]: 423
- paired article number: 37219 01
- Item number: 37218 01
- Manufacturer: 尝贰惭贵脰搁顿贰搁
- EAN number: 4047437419148
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Upper, Front Axle Left
- for OE number: LR018344
- Item number: 22.31.038
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081209902
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear, Lower, Front Axle Left
- paired article number: ADJ138629
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 4,31
- Item number: ADJ138628
- Manufacturer: BLUE PRINT
- EAN number: 5050063222791
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Lower, Rear, Right
- Length [mm]: 423
- paired article number: 37218 01
- Item number: 37219 01
- Manufacturer: 尝贰惭贵脰搁顿贰搁
- EAN number: 4047437419162
- Condition: New
price incl. 19% VAT
excl. delivery costs
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left, Lower, Rear
- Length [mm]: 423
- paired article number: 37219-PCS-MS
- Item number: 37218-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4255708577927
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right, Lower, Rear
- Length [mm]: 423
- paired article number: 37218-PCS-MS
- Item number: 37219-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4255708577910
- Condition: New
-
- Fitting Position: Front Axle, Front Axle Right
- Vehicle Identification Number (VIN) to: 9A999999
- paired article number: TC3026
-
- Fitting Position: Front Axle Right, outer
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Upper, Right
- Length [mm]: 310
- Height [mm]: 108
- paired article number: TC3026
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 290
- Item number: TC3027
- Manufacturer: DELPHI
- EAN number: 5012759973134
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Lower, Front Axle Right, Rear
- paired article number: ADJ138628
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 4,106
- Item number: ADJ138629
- Manufacturer: BLUE PRINT
- EAN number: 5050063222807
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Front Axle Left
- Vehicle Identification Number (VIN) to: 9A999999
-
- Fitting Position: Front Axle Left, outer
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Left, Upper
- Length [mm]: 310
- Height [mm]: 108
- paired article number: TC3027
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 290
- Item number: TC3026
- Manufacturer: DELPHI
- EAN number: 5012759973127
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Upper
- paired article number: LR-WP-12693
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 47
- Packaging width [cm]: 35
- Packaging height [cm]: 8
- Item number: LR-WP-12694
- Manufacturer: MOOG
- EAN number: 4060426231590
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 13,8
- Fitting Position: Front Axle Left, outer, Upper
- Length [mm]: 246
- paired article number: 211561
- Thread Size: M12 x 1.75
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 4,46
- Item number: 211560
- Manufacturer: A.B.S.
- EAN number: 8717109632019
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 13,8
- Fitting Position: Front Axle Right, outer, Upper
- Length [mm]: 246
- paired article number: 211560
- Thread Size: M12 x 1.75
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 4,46
- Item number: 211561
- Manufacturer: A.B.S.
- EAN number: 8717109632026
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5