Vehicle identification number: 1590ACV
Range Rover L494 4.4 SDV8 4x4 Suspension arm (340 hp Diesel 448DT(DITC))
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 22,5
- Fitting Position: Front Axle, Rear, Right, outer, Lower, Front Axle Right
- Length [mm]: 364
- Thread Size 1: M16x1.5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,3
- Item number: 273C1119
- Manufacturer: RIDEX
- EAN number: 4059191816606
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 22,4
- Fitting Position: Front Axle, Lower, Front Axle Left
- Length [mm]: 364
- Thread Size: M16X1,5 RHT
- Thread Size 1: M16x1.5
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,129
- Item number: 273C1120
- Manufacturer: RIDEX
- EAN number: 4059191816620
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 21,5
- Fitting Position: Front Axle, in front of axle, Left, outer, Lower, Front Axle Left
- Length [mm]: 490
- Thread Size: M16x1.5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 6,6
- Item number: 273C1122
- Manufacturer: RIDEX
- EAN number: 4059191816743
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Cast Iron
- Cone Size [mm]: 21,5
- Fitting Position: Front Axle, in front of axle, Right, outer, Lower, Front Axle Right
- Length [mm]: 490
- External Thread [mm]: M16x1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 6,6
- Item number: 273C1121
- Manufacturer: RIDEX
- EAN number: 4059191816682
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Steel
- Fitting Position: in front of axle, Rear Axle Right, outer, Lower
- Length [mm]: 310
- paired article number: 211886
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,2
- as standard
- Item number: 211887
- Manufacturer: A.B.S.
- EAN number: 8717109703894
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Left
- paired article number: LR-TC-14862
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 48,5
- Packaging width [cm]: 14
- Packaging height [cm]: 11
- Item number: LR-TC-14861
- Manufacturer: MOOG
- EAN number: 4060426117986
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: outer, Rear Axle Right, Lower, Front
- Length [mm]: 380
- Height [mm]: 90
- paired article number: TC3729
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 80
- Item number: TC3730
- Manufacturer: DELPHI
- EAN number: 5012759996591
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: outer, Rear Axle Left, Lower, Front
- Length [mm]: 380
- Height [mm]: 90
- paired article number: TC3730
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 80
- Item number: TC3729
- Manufacturer: DELPHI
- EAN number: 5012759996584
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: both sides, Rear Axle
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 12,6
- Packaging height [cm]: 6,5
- Packaging Depth [cm]: 44,6
- Item number: V48-0203
- Manufacturer: VAICO
- EAN number: 4046001791130
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right, outer, Upper
- Length [mm]: 386
- paired article number: 211872
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,607
- as standard
- Item number: 211872
- Manufacturer: A.B.S.
- EAN number: 8717109701739
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle Right
- paired article number: V48-0213
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 7,6
- Packaging height [cm]: 7,3
- Packaging Depth [cm]: 36,2
- Item number: V48-0212
- Manufacturer: VAICO
- EAN number: 4046001807350
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle Right
- paired article number: V48-0212
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 7,6
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 36,3
- Item number: V48-0213
- Manufacturer: VAICO
- EAN number: 4046001807367
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle, Left
- paired article number: L17557
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 1
- Weight [kg]: 1,827
- Packaging length [cm]: 41
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Item number: L17558
- Manufacturer: MONROE
- EAN number: 5412096548659
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Lower, Left
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint, without bearing
- Weight [kg]: 1,6
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV487
- Manufacturer: ESEN SKV
- EAN number: 5906302225187
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Fitting Position: Rear Axle Right, outer, Lower, Rear Axle Lower, Right
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint, without bearing
- Weight [kg]: 1,61
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV488
- Manufacturer: ESEN SKV
- EAN number: 5906302225194
- Condition: New
price incl. 19% VAT
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Steel
- Fitting Position: in front of axle, Rear Axle Left, outer, Lower
- Length [mm]: 310
- paired article number: 211887
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 2,2
- as standard
- Item number: 211886
- Manufacturer: A.B.S.
- EAN number: 8717109703856
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear Axle Right, Upper
- Length [mm]: 385
- Required quantity: 2
- Bore Diameter [mm]: 14,2
- replacement in pairs recommended
- Item number: 53-16 050 0053
- Manufacturer: MEYLE
- EAN number: 4040074336366
- Condition: New
price incl. 19% VAT
excl. delivery costs
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Rear Axle Right, Upper
- Length [mm]: 385
- Required quantity: 2
- Inner Diameter [mm]: 14
- Item number: 58193909
- Manufacturer: METZGER
- EAN number: 4062101258274
- Condition: New
-
- Fitting Position: Front Axle Left, outer
- Vehicle Identification Number (VIN) to: HA999999
- paired article number: TC3047
- Vehicle configuration line / variant: LENGTH -5MM
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Left, Upper
- Length [mm]: 315
- Height [mm]: 86
- paired article number: TC3047
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 305
- Item number: TC3046
- Manufacturer: DELPHI
- EAN number: 5012759965870
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Left, Right, Upper
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 47
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: LR-TC-14857
- Manufacturer: MOOG
- EAN number: 4044197988501
- Condition: New
- 1
- 2
- 3
- 4
- 5