Mazda 626 IV 2.5 24V Suspension arm (165 hp Petrol KL-ZE)
- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle Left, Front, Rear Axle, outer, Left, Lower, Rear
- Fabrication Number: ZWT-MZ-012
- Item number: ZWT-MZ-012
- Manufacturer: NTY
- EAN number: 5908281475645
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear Axle, outer, Left, Right, Lower, Rear Axle Left, Rear Axle Right
- Fabrication Number: ZWT-MZ-051
- Item number: ZWT-MZ-051
- Manufacturer: NTY
- EAN number: 5908281464168
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Weight [kg]: 1,065
- Packaging length [cm]: 60,0
- Packaging width [cm]: 5,0
- Packaging height [cm]: 4,0
- Item number: 0525-GER
- Manufacturer: FEBEST
- EAN number: 4056111014838
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Lower
- Weight [kg]: 1,195
- Packaging length [cm]: 67,0
- Packaging width [cm]: 6,5
- Packaging height [cm]: 5,5
- Item number: 0525-GE
- Manufacturer: FEBEST
- EAN number: 4056111014852
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right
- Weight [kg]: 1,61
- Packaging length [cm]: 63,0
- Packaging width [cm]: 7,5
- Packaging height [cm]: 7,5
- Item number: 0525-GERR
- Manufacturer: FEBEST
- EAN number: 4056111014821
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left
- Weight [kg]: 1,605
- Packaging length [cm]: 63,0
- Packaging width [cm]: 7,5
- Packaging height [cm]: 7,5
- Item number: 0525-GERL
- Manufacturer: FEBEST
- EAN number: 4056111014845
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left
- paired article number: 69SKV032
- Weight [kg]: 4,8
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV031
- Manufacturer: ESEN SKV
- EAN number: 5903968443184
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right
- paired article number: 69SKV031
- Weight [kg]: 4,8
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV032
- Manufacturer: ESEN SKV
- EAN number: 5903968443191
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Right, Lower
- paired article number: FD-WP-0557
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: FD-WP-0558
- Manufacturer: MOOG
- EAN number: 5010874769885
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left
- Length [mm]: 465
- paired article number: QSA1790S
- Thread Size: M14x1,5
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 90
- Item number: QSA1773S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593630642
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right
- Length [mm]: 465
- paired article number: QSA1773S
- Thread Size: M14x1,5
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 90
- Item number: QSA1790S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593630789
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right, outer, Lower
- Length [mm]: 317
- paired article number: 210317
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,979
- as standard
- Item number: 210316
- Manufacturer: A.B.S.
- EAN number: 8717109312928
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left, outer, Lower
- Length [mm]: 317
- paired article number: 210316
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 4,005
- as standard
- Item number: 210317
- Manufacturer: A.B.S.
- EAN number: 8717109312935
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left, Lower, Front Axle Left
- Thread Size: M14 x 1,5
- Axle alignment required after fitting
- Item number: A32-1152
- Manufacturer: ACKOJA
- EAN number: 4046001951916
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left
- paired article number: 51275
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 51274
- Manufacturer: SIDEM
- EAN number: 5413978162130
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right
- paired article number: 51274
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 51275
- Manufacturer: SIDEM
- EAN number: 5413978162147
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle, Right, Lower, Front Axle Right
- Thread Size: M14 x 1,5
- Axle alignment required after fitting
- Item number: A32-1153
- Manufacturer: ACKOJA
- EAN number: 4046001949555
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Front Axle, Left, Lower
- paired article number: FD-WP-0558
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 61,2
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8,8
- Item number: FD-WP-0557
- Manufacturer: MOOG
- EAN number: 5010874769878
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Left
- paired article number: 40842
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 40841
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978832835
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 18
- Fitting Position: Front Axle Right
- paired article number: 40841
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Item number: 40842
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978832842
- Condition: New
- 1
- 2
- 3