Mercedes X218 CLS 350 BlueTEC / d Suspension arm (252 hp Diesel OM 642.852)
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left
- Length [mm]: 265
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 0,5
- Inner Diameter [mm]: 12
- Item number: 273C1066
- Manufacturer: RIDEX
- EAN number: 4059191785582
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Fitting Position: Rear Axle Right, Lower
- Length [mm]: 265
- Inner Diameter [mm]: 12,2
- Item number: 273C1401
- Manufacturer: RIDEX
- EAN number: 4059191864300
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Lower, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 2,734
- Packaging Depth [cm]: 48,78
- Item number: 273C1716
- Manufacturer: RIDEX
- EAN number: 4064138154925
- Condition: New
Sample photo only
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear Axle Lower
- Weight [kg]: 1,161
- Packaging Depth [cm]: 37,5
- Item number: 4211340
- Manufacturer: KRAFT
- EAN number: 5901159398411
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle Lower
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 5,6
- Packaging height [cm]: 5,6
- Packaging Depth [cm]: 37,5
- Item number: V30-7618
- Manufacturer: VAICO
- EAN number: 4046001453670
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower, Rear Axle Left, Rear Axle Right
- Required quantity: 2
- Item number: 52843
- Manufacturer: MAPCO
- EAN number: 4043605749819
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Lower, Front
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 41,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: ME-TC-8814
- Manufacturer: MOOG
- EAN number: 4044197568413
- Condition: New
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Steel
- Fitting Position: in front of axle, Rear Axle Left, Rear Axle Right, outer, Lower
- Length [mm]: 331
- paired article number: 211410
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Weight [kg]: 0,451
- as standard
- Item number: 211410
- Manufacturer: A.B.S.
- EAN number: 8717109621723
- Condition: New
Important: Observe Fitting Instructions
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear, Rear Axle Right, Centre
- Item number: RH05-3045
- Manufacturer: REINHOCH
- EAN number: 5901655692037
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower, Rear Axle Right, Rear Axle Left
- Item number: 49397086
- Manufacturer: CORTECO
- EAN number: 3358960607409
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Right, Upper, Front
- Length [mm]: 370
- paired article number: 52841
- Required quantity: 1
- Item number: 52842
- Manufacturer: MAPCO
- EAN number: 4043605749802
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Upper, Front
- Length [mm]: 370
- paired article number: 52842
- Required quantity: 1
- Item number: 52841
- Manufacturer: MAPCO
- EAN number: 4043605749796
- Condition: New
- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle, Lower, Front, outer
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Required quantity: 2
- Rod / Strut: Push Rod
- Article number of recommended accessories: 8500 23411
- Item number: 8500 23574
- Manufacturer: TRISCAN
- EAN number: 5710476149206
- Condition: New
See Accessories list for gaskets
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Right, Upper, Rear
- paired article number: 23586M-PCS-MS
- Rod / Strut: Camber Link
- Quantity per axle: 1
- Net weight [kg]: 0,68
- Gross Weight [kg]: 0,7
- Item number: 23585M-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083168395
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Left, Upper, Rear
- paired article number: 23585M-PCS-MS
- Rod / Strut: Camber Link
- Quantity per axle: 1
- Net weight [kg]: 0,67
- Gross Weight [kg]: 0,67
- Item number: 23586M-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083168418
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Fitting Position: Rear Axle Right, Lower
- Length [mm]: 265
- Inner Diameter [mm]: 12,2
- Item number: SKCA-0051402
- Manufacturer: STARK
- EAN number: 4059191864294
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear Axle, Left, Right, Lower
- Item number: LVSA2084
- Manufacturer: MOTAQUIP
- EAN number: 5056462444604
- Condition: New
- Control / Trailing Arm Type: Trailing Arm
- Fitting Position: Rear Axle, Right, Lower
- paired article number: ME-TC-8815
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 41,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: ME-TC-8816
- Manufacturer: MOOG
- EAN number: 4044197568437
- Condition: New
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, outer, Front, Left, Upper
- Length [mm]: 372
- Height [mm]: 84
- paired article number: TC2564
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 40
- Item number: TC2563
- Manufacturer: DELPHI
- EAN number: 5012759492048
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle Left, Lower
- paired article number: V30-7620
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 10
- Packaging height [cm]: 37,7
- Packaging Depth [cm]: 9
- Item number: V30-7619
- Manufacturer: VAICO
- EAN number: 4046001453762
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- 1
- 2
- 3
- 4
- 5