Vehicle identification number: 1313HXV
Mercedes A238 E 300 EQ Boost Suspension arm (258 hp Petrol/Electric M 264.920)
- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle Left, inner, outer, Upper
- paired article number: ME-TC-8822
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 41,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: ME-TC-8823
- Manufacturer: MOOG
- EAN number: 4044197568475
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Lower, Front, outer
- paired article number: JTC1804
- Item number: JTC1772
- Manufacturer: TRW
- EAN number: 3322938311186
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Lower, Left
- Item number: 49395500
- Manufacturer: CORTECO
- EAN number: 3358960546708
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Right, Lower, Front, outer
- paired article number: JTC1772
- Item number: JTC1804
- Manufacturer: TRW
- EAN number: 3322938314361
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear, Rear Axle Right, Upper
- paired article number: V30-7623
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 10,2
- Packaging height [cm]: 9,3
- Packaging Depth [cm]: 43,2
- Item number: V30-7624
- Manufacturer: VAICO
- EAN number: 4046001453786
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Right, Upper, Front, inner
- paired article number: 23588M-PCS-MS
- Rod / Strut: Pull Rod
- Quantity per axle: 1
- Net weight [kg]: 0,59
- Gross Weight [kg]: 0,59
- Item number: 23587M-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083168432
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Right, Upper, Rear
- Length [mm]: 343
- paired article number: 52839
- Required quantity: 1
- Item number: 52840
- Manufacturer: MAPCO
- EAN number: 4043605749789
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front, Rear Axle Right, outer, Rear Axle Upper, Right
- paired article number: 69SKV323
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint, without bearing
- Weight [kg]: 0,55
- Always compare old and new part (in particular OE No.)
- Item number: 69SKV324
- Manufacturer: ESEN SKV
- EAN number: 5906302223558
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Diameter [mm]: 40
- Fitting Position: Rear Axle Left, Centre
- paired article number: 37799
- Weight [kg]: 0,465
- Inner Diameter [mm]: 12
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 37798
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816377986
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Upper, Front, outer
- paired article number: JTC1779
- Item number: JTC1776
- Manufacturer: TRW
- EAN number: 3322938311223
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle Right, Lower
- paired article number: V30-7619
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 7,6
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 36,4
- Item number: V30-7620
- Manufacturer: VAICO
- EAN number: 4046001453779
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Diameter [mm]: 40
- Fitting Position: Rear Axle Right, Centre
- paired article number: 37798
- Weight [kg]: 0,465
- Inner Diameter [mm]: 12
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 37799
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816377993
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Diameter [mm]: 40,4
- Fitting Position: Rear Axle Right, Centre
- paired article number: 10 93 7798
- Weight [kg]: 0,465
- Inner Diameter [mm]: 12,3
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 10 93 7799
- Manufacturer: SWAG
- EAN number: 4044688574565
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Diameter [mm]: 40,4
- Fitting Position: Rear Axle Left, Centre
- paired article number: 10 93 7799
- Weight [kg]: 0,465
- Inner Diameter [mm]: 12,3
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: 10 93 7798
- Manufacturer: SWAG
- EAN number: 4044688574558
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle, Left, Upper, Front, inner
- paired article number: 23587M-PCS-MS
- Rod / Strut: Pull Rod
- Quantity per axle: 1
- Net weight [kg]: 0,59
- Gross Weight [kg]: 0,59
- Item number: 23588M-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083168456
- Condition: New
- Material: Aluminium
- Fitting Position: Rear Axle Left, Rear
- paired article number: 72-5248, 36251 01
- Rod / Strut: Camber Link
- Item number: 72-5247
- Manufacturer: MAXGEAR
- EAN number: 5903766310923
- Condition: New
- Material: Aluminium
- Fitting Position: Rear Axle Right, Rear
- paired article number: 72-5247, 36250 01
- Rod / Strut: Camber Link
- Item number: 72-5248
- Manufacturer: MAXGEAR
- EAN number: 5903766310930
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Diameter [mm]: 44
- Fitting Position: Rear Axle Left, Upper, Front
- paired article number: 37796
- Weight [kg]: 0,565
- Inner Diameter [mm]: 12
- Supplementary Article / Supplementary Info: with rubber mounts
- Rod / Strut: Pull Rod
- Observe service information
- Item number: 37795
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816377955
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Diameter [mm]: 44
- Fitting Position: Rear Axle Right, Upper, Front
- paired article number: 37795
- Weight [kg]: 0,565
- Inner Diameter [mm]: 12
- Supplementary Article / Supplementary Info: with rubber mounts
- Rod / Strut: Pull Rod
- Observe service information
- Item number: 37796
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816377962
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Rear Axle Left, Lower
- Length [mm]: 320
- Weight [g]: 3000
- Item number: 100537
- Manufacturer: DAKAtec
- EAN number: 4250745517158
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 2
- 3
- 4
- 5
- 6