Mercedes X166 GL 350 CDI / BlueTEC 3.0 4-matic Suspension arm (243 hp Diesel OM 642.826)
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Length [mm]: 522
- Inner Diameter [mm]: 12,2
- Rod / Strut: Coupling Rod
- Item number: 273C1491
- Manufacturer: RIDEX
- EAN number: 4059191870042
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 20
- Fitting Position: Front Axle, Right, outer, Lower, Front Axle Right
- Length [mm]: 443
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Weight [kg]: 6,8
- Item number: 273C1117
- Manufacturer: RIDEX
- EAN number: 4059191816460
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle, Left, Lower
- Item number: 273C1689
- Manufacturer: RIDEX
- EAN number: 4059191923038
- Condition: New
- Accumulate your bonuses through purchasing items marked 鈥淏ONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Right, Upper
- paired article number: 176403
- Weight [kg]: 0,796
- Inner Diameter [mm]: 12
- Observe service information
- Item number: 176402
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224764022
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Upper
- paired article number: 176402
- Weight [kg]: 0,796
- Inner Diameter [mm]: 12
- Observe service information
- Item number: 176403
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224764039
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, Right, Upper
- paired article number: ME-TC-14937
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 48,5
- Packaging width [cm]: 14
- Packaging height [cm]: 11
- Item number: ME-TC-14938
- Manufacturer: MOOG
- EAN number: 4060426167400
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle, Right
- Length [mm]: 325
- paired article number: V30-2886
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 8,3
- Packaging height [cm]: 4,2
- Packaging Depth [cm]: 43,3
- Item number: V30-2885
- Manufacturer: VAICO
- EAN number: 4046001844287
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Rod / Strut: Suspension Rod
- Packing Type: Box
- Packaging length [cm]: 76,5
- Packaging width [cm]: 9
- Packaging height [cm]: 7
- Item number: ME-TC-10647
- Manufacturer: MOOG
- EAN number: 4044197644933
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Right, Upper
- paired article number: 33 10 3518
- Weight [kg]: 0,796
- Inner Diameter [mm]: 12
- Item number: 33 10 3517
- Manufacturer: SWAG
- EAN number: 4054228764028
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left, Upper
- paired article number: 33 10 3517
- Weight [kg]: 0,796
- Inner Diameter [mm]: 12
- Item number: 33 10 3518
- Manufacturer: SWAG
- EAN number: 4054228764035
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Sample photo only
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle Left, Rear Axle Right, Rear
- Length [mm]: 522
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Required quantity: 2
- Rod / Strut: Guide Rod
- Inner Diameter 2 [mm]: 12
- Item number: 58196309
- Manufacturer: METZGER
- EAN number: 4062101256614
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle, Left
- Length [mm]: 372
- paired article number: V30-2885
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 8,6
- Packaging height [cm]: 4,2
- Packaging Depth [cm]: 43,6
- Item number: V30-2886
- Manufacturer: VAICO
- EAN number: 4046001844294
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel, Steel
- Supplementary Info: Original VAICO Quality
- Fitting Position: both sides, Rear Axle
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 5,3
- Packaging height [cm]: 6,5
- Item number: V30-3101
- Manufacturer: VAICO
- EAN number: 4046001811050
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle, Right, Upper
- paired article number: ME-TC-13979
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 46,5
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8
- Item number: ME-TC-13980
- Manufacturer: MOOG
- EAN number: 4044197983322
- Condition: New
- Control / Trailing Arm Type: Semi-Trailing Arm
- Fitting Position: Rear Axle both sides
- for OE number: 166 350 0306
- Item number: 02.32.208
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081197223
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle, both sides, Front
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 47,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: ME-TC-14939
- Manufacturer: MOOG
- EAN number: 4060426156572
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Front, Rear Axle Left, Rear Axle Right
- Required quantity: 2
- replacement in pairs recommended
- Item number: 016 050 0154
- Manufacturer: MEYLE
- EAN number: 4040074254134
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Fitting Position: Rear Axle Left, Upper, Front, Rear Axle Right
- Weight [kg]: 1,533
- Observe service information
- Item number: 181367
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224813676
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle, Left, Upper
- paired article number: ME-TC-13980
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 46,5
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8
- Item number: ME-TC-13979
- Manufacturer: MOOG
- EAN number: 4044197983315
- Condition: New
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Upper, Front Axle Right
- paired article number: 107852
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 1,39
- Supplementary Article / Supplementary Info: with lock nut, with rubber mounts
- Observe service information
- External Thread Size: M14 x 1,5
- Item number: 107851
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224078518
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1
- 2
- 3
- 4
- 5